• Korean Chemical Engineering Research
• /
• v.51 no.4
• /
• pp.438-442
• /
• 2013

The study of bioproduct production from inexpensive biomass such as marine biomass has recently attracted considerable attention. Because, marine biomass which compared to land biomass, it can be grown rapidly and is easily cultivated without the need for expensive equipment. In addition, the carbohydrate contents are similar or higher than land biomass such as woody biomass and can be easily converted to chemicals through proper chemical processes. In the production of various biochemicals from marine biomass, levulinic acid is a highly versatile chemical with numerous industrial uses and has the potential to become a commodity chemical. It can be used as a raw material for resins, plasticizers, textiles, animal feed, coatings and antifreeze. In this study, experiments were carried out to determine the optimum conditions of temperature, acid concentration and reaction time for production of levulinic acid from marine biomass, Gelidium amansii, using two-step treatment. In the first hydrolysis step, solid-state cellulose which was used to produce ethanol by fermentation and liquid-state galactose which used to produce bioproduct such as levulinic aicd were obtained through acid soaking. In the second hydrolysis step, the liquid-state galactose was converted into levulinic acid via a high-temperature reaction in a batch reactor. As a result, the overall production yield of Gelidium amansii to levulinic acid in the two-step acid hydrolysis was approximately 20.6% on the initial biomass basis.

• Resources Recycling
• /
• v.23 no.3
• /
• pp.30-36
• /
• 2014

A large amount of waste copper slag containing about 35 ~ 45% iron has been generated and discarded every year from pyrometallurgical processes for producing copper from copper concentrate. Thus, recovery of iron from the waste copper slag is of great interest for comprehensive use of mineral resource and reduction of environment problems. In this study, a physico-chemical separation process for upgrading iron from the waste copper slag discharged as an industrial waste has been developed. The process first crushes the waste copper slag below 1 mm (first crushing step), followed by carbon reduction at $1225^{\circ}C$ for 90 min (carbon reduction step). And then, resulting material is again crushed to $-104{\mu}m$ (second crushing step), followed by wet magnetic separation (wet magnetic separation step). Using the developed process, a magnetic product containing more than 66 wt.% iron was obtained from the magnetic separation under a magnetic field strength of 0.2 T for the waste copper slag treated by the reduction reaction. At the same conditions, the percentage recovery of iron was over 72%. The iron rich magnetic product obtained should be used as a iron resource for making pig iron.

• The KIPS Transactions:PartD
• /
• v.17D no.2
• /
• pp.157-166
• /
• 2010

More recently, RFID (Radio Frequency Identification) systems have begun to find greater use in various industrial fields. The use of RFID system in these application domains has been promoted by efforts to develop the RFID tags which are low in cost, small in size, and high in performance. The RFID applications enable the real-time capture and update of RFID tag information, while simultaneously allowing business process change through real-time alerting and alarms. These be developed to monitor person or objects with RFID tags in a place and to provide visibility and traceability of the seamless flows of RFID tags. In this time, the RFID readers should be placed in diverse locations, the RFID flows between these readers can be tested based on various scenarios. However, due to the high cost of RFID readers, it may be difficult to prepare the similar environment equipped with RFID read/write devices. In this paper, we propose a simulator to allow RFID application testing without installing physical devices. It can model the RFID deployment environment, place various RFID readers and sensors on this model, and move the RFID tags through the business processes. This simulator can improve the software development productivity by accurately testing RFID middleware and applications. In addition, when data security cannot be ensured by any fault, it can decide where the problem is occurred between RFID hardware and middleware.

• Journal of the Korean Magnetics Society
• /
• v.21 no.2
• /
• pp.77-82
• /
• 2011

The use of soft magnetic materials have been increasing in the various industrial fields according to the increasing demand for high performance, automatic, miniaturing equipments in the recent our life. In this study, we investigated the effect of factors on the core loss and magnetic properties of electrical steel and soft magnetic composites. Furthermore, we reviewed the major efforts to reduce the core loss and improve the soft magnetic properties in the two main soft magnetic materials. Domain purification which results from reduced density of defects in cleaner electrical steels is combined with large grains to reduce hysteresis loss. The reduced thickness and the high electrical conductivity reduce the eddy current component of loss. Furthermore, the coating applied to the surface of electrical steel and texture control lead to improve high permeability and low core loss. There is an increasing interest in soft magnetic composite materials because of the demand for miniaturization of cores for power electronic applications. The SMC materials have a broad range of potential applications due to the possibility of true 3-D electromagnetic design and higher frequency operation. Grain size, sintering temperature, and the degree of porosity need to be carefully controlled in order to optimize structure-sensitive properties such as maximum permeability and low coercive force. The insulating coating on the powder particles in SMCs eliminates particle-to-particle eddy current paths hence minimizing eddy current losses, but it reduces the permeability and to a small extent the saturation magnetization. The combination of new chemical composition with optimum powder manufacturing processes will be able to result in improving the magnetic properties in soft magnetic composite materials, too.

• Korean Business Review
• /
• v.13
• /
• pp.179-193
• /
• 2000

It is not simple to manage software quality, because software development process and product itself are very complex. Recently ISO/IEC 15504- international standard for software process improvement, capability determination and development - was completed and applied to many local trials, and their results are being reported as registered local trials. The first step of software process assessment is established by examining whether its base practices are performed and which level they are achieved. And as far as assessment responsibility and credibility are concerned, assessment is generally performed by team-based assessors. Therefore assessment team construction and its preference of practice importances have a great effect on the credibility and the objectivity of assessment. In this paper, we analyse a SPICE-based software process assessment trial by comparing base practice importances of assessed processes, which are expressed through a real assessment, with its final rating results. Survey data are collected from assessors and interviewees who were engaged in the SPICE trial that was performed by ISO/IEC 15504, and final data analysis are derived from the factor analysis method. It is convinced that the result of this paper is able to enhance the credibility of software process assessment by provisions of objective and rational criteria and preference information for assessment team construction and base practice importances in future.

• Clean Technology
• /
• v.22 no.2
• /
• pp.75-81
• /
• 2016

As the quality of life has improved, the desire for the safety and quality of the foods and drugs has been gradually increasing. For safety and quality management in foods, drugs, health management, agriculture, environmental conservation, and the industrial fields, the demand for quickly and accurately measuring various chemicals has been increasing. As well, the desire for self-diagnosis of one's own health state and self-examining the safety of environment has been gradually increasing. Optical Isomers can have very different physiological effects on human beings. One isomer can exhibit desirable pharmacological, pharmacodynamic, pharmacokinetic and physiological properties, while the other isomer can exhibit undesirable and toxic properties toward living organisms, especially human beings. And they can exhibit different activities in chemical and biotechnological processes. Although the majority of commercially available drugs are now both synthetic and chiral materials, a most chiral drugs are still marketed as racemic drugs. Thus, to avoid possible undesirable side effects from chiral drugs, more effective methods for separating and recognizing chiral compounds are urgently needed. In this report, we investigated the overall developing trends of the chiral drug separation and analysis technology by using molecular recognition.

• Korean Chemical Engineering Research
• /
• v.54 no.2
• /
• pp.239-247
• /
• 2016

This study aims to examine absorption characteristics of toluene, isopropyl alcohol (IPA), ethyl acetate (EA), and ternary-compounds, all of which are widely used in industrial processes, by means of four types of commercial activated carbon substances. It turned out that among the three types of volatile organic compounds, the breakthrough point of activated carbon and that of IPA, whose affinity was the lowest, were the lowest, and then that of EA and that of toluene in the order. With the breakthrough point of IPA, which was the shortest, as the standard, changes in the breakthrough points of unary-compounds, binary-compounds, and ternary-compounds were examined. As a result, it turned out that the larger the number of elements, the lower the breakthrough point. This resulted from competitive adsorption, that is, substitution of substances with a low level of affinity with those with a high level of affinity. Hence, the adsorption of toluene-IPA-EA and ternary-compounds require a design of the activated carbon bed based on the breakthrough of IPA, and in the design of activated carbon beds in actual industries as well, a substance whose level of affinity is the lowest needs to be the standard.

• Korean Chemical Engineering Research
• /
• v.56 no.1
• /
• pp.133-138
• /
• 2018

Safety management has become even more important because of the safety and environmental issues that have arisen since the 2000s. However, the safety study requires many empirical data, so there are many limitations. In the case of pipe safety, simulation programs exist, but it is difficult to get data about the pipe internal erosion of the pipe. In this study, the erosion rate of the pipe elbow was simulated using computational fluid dynamics (CFD). Also, the failure period of the pipe was calculated by the limit state function using erosion rate. In the case of CFD pipe, a sample which is actually operated in Yeosu industrial complex was used, and the geometry and mesh formation were rationalized in terms of typical fluid dynamics simulations. Using the Discrete Phase Model (DPM) and the corrosion model, the erosion rate ($3.09227mm{\cdot}yr^{-1}$) was obtained from CFD simulations. As a result of applying the erosion rate to the limit state function, we obtained the pipe failure period value, 14.2 years to trigger a leak and 28.2 years to trigger a burst. Through these processes, we concluded that pipe erosion is one of the major failure modes. In addition to the results, this study has significance for suggesting the methodology of the pipe safety study.

• Journal of the Economic Geographical Society of Korea
• /
• v.12 no.4
• /
• pp.421-437
• /
• 2009

China has transformed her strategies for economic development from exogenous development founded on foreign capitals to endogenous development based on enhancing technology innovation capabilities since 2000. More specifically, Chinese business activities have coupled with new institutional settings which enable them to facilitate advanced technology and management methods. As a result, the characteristics of the spatial economy in China are likely to transfer from export-led developmental space to technology-oriented developmental space. In this context, this paper aims to identify the characteristics of technology-oriented space by investigating intra-, inter- and extra-firms relations of Korean FDI firms in Shanghai, China. In terms of intra-firm relations, Korean FDI firms adopted strategies for maximizing business efficiency and effectiveness by transforming their personal networks into formal networks. In terms of inter-firm relations, the distinction of Korean FDI firms' networks has been found in accordance with firm size, industrial sectors, ways of investment etc. Finally, Korean FDI firms has formal networks resulted from institutional involvement, as well as informal (personal) networks based on guanxi (inter-personal relations) in extra-firm relations. Therefore, two types of processes affecting the networks and institutional legacies of the Soviet system can be identified. First is the interaction of institutions and restructuring of pre-existing networks. Second is the insulated institutions and endurance of preexisting networks. And these two governance types have created regional economies which are embedded and over-embedded.

• Journal of the Korean Institute of Gas
• /
• v.8 no.4 s.25
• /
• pp.62-69
• /
• 2004

It is necessary to eliminate the electric static for the prevention of disasters by electric static discharge, the improvement of production efficiency, the protection of a sensitive electronic devices in the variable manufacturing processes. Then it is handled for elimination of electric static in the painting plant, the film manufacturing plant, the producing semi-conductor factory. This study described on the ideal condition of electric static elimination efficiency by changing of the length of voltage input type eliminator's bar, the length of copper pipe and the gap of electrode and the existence of explosion by inflammable gas with that conditions. As the result, the electric static elimination efficiency has the most ideal value at the 8-11(mm) gap of the earth electrode and needle type electrode each elimination bar and there is not explode at the explosive experiment of inflammable gas with the ideal elimination bar. We can consider that there are some data which are needed for elimination efficiency and it will be able to protect the occurrence of explosion accident inflammable nas in the industrial fields.