• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.20 no.3
• /
• pp.153-161
• /
• 2020

Due to the recent development of the 4th industrial revolution, Smart Factories that organically link various technologies such as AI, IoT, Cloud, and Big Data are increasing. Based on this, in the industrial environment where the internal process is controlled automatically, high availability should be secured against the loss caused when the internal process of the Smart Factory is stopped due to the determinism and malicious attack necessary to control the device such as PLC. The research and analysis of industrial network equipment and security equipment used in various industries can improve the efficiency and usability of industrial control systems in national infrastructure and can provide important feedback to build related infrastructure. Therefore, we compared industrial network equipment and security equipment in this paper in a variety of ways and expect to be used as a roadmap for developing technologies for industrial network equipment and industrial security equipment based on the results of this paper.

• IEMEK Journal of Embedded Systems and Applications
• /
• v.15 no.2
• /
• pp.79-85
• /
• 2020

IIoT stands for Industrial Internet of Things used in manufacturing, healthcare, and transportation in networked smart factories. Recently, IIoT's environment requires an automated control system through intelligent cognition to improve efficiency. In particular, IIoT can be applied to automatic calibration of production equipment for improved management in industrial environments. Such automation systems require a wireless network for transmitting industrial data. Self-calibration systems in laser transmission paths using wireless networks can save resources and improve production quality by real-time monitoring and remote control of laser transmission path. In this paper, we propose a wireless networked system for self-calibration of laser equipment that requires a laser transmission path, and we show the results of the prototype evaluation. The self-calibration system of laser equipment measures the coordinates of the laser points with sensors and sends them to the host using the proposed application protocol. We propose a wireless network service for the wired motor controller to align the laser coordinates. Using this wireless network, the host controls the motor by sending a control command of the motor controller in an HTTP message based on the received coordinate values. Finally, we build a prototype system of the proposed design to verify the detection performance and analyze the network performance.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2009.05a
• /
• pp.752-755
• /
• 2009

Recently, the production process system is largely composed automatic system using the wired network. The production process system using wired network has disadvantages that take place expense when the installed and inspected production of equipment was replaced. The each equipment happens to repair cost for control and management in production processes. In this paper, the industrial equipment that applied for IEEE 802.15.4(ZigBee) technology solves a complicated space at the plant. And then when the industrial equipments replace wired network with wireless network, this paper studied its user interface.

• Journal of Korea Society of Industrial Information Systems
• /
• v.25 no.4
• /
• pp.17-27
• /
• 2020

In this paper, we proposed verification methods to prove the effectiveness of automatic test equipment (ATE) for weapon systems. Since the test results from the unproven ATE is not reliable and its use is limited as objective data, it is essential to verify the test equipment in order to guarantee the quality level of the unit under test (UUT). Through the suggested methods, it is applied to the ATE of the tactical information communications network (TICN) system to confirm the verification results and to describe the validation results.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.14 no.12
• /
• pp.6469-6477
• /
• 2013

As the Internet has grown, energy consumption and GHG emission from internet use have become issues in recent years. On the other hand, such interest in greening the Internet has focused on edge devices, and there is a lack of deeper related studies of the energy wasted by excessive network-connectivity and the savings potential in wired network equipment. This study presents the background and reasonability of studies on the energy efficiency of wired networks in terms of the environment, economy and energy resources. The energy consumption and savings potential of network equipment were also estimated and the major factors of energy consumption was analyzed based on the data, and future studies for the Internet are presented.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.11 no.1
• /
• pp.78-101
• /
• 2017

High-quality industrial control is critical to ensuring production quality, reducing production costs, improving management levels and stabilizing equipment and long-term operations. WiFi-based Long Distance (WiLD) networks have been used as remote industrial control networks. Real-time performance is essential to industrial control. However, the original mechanism of WiLD networks does not minimize end-to-end delay and restricts improvement of real-time performance. In this paper, we propose two algorithms to obtain the transmitting/receiving phase cycle length for each node such that real time constraints can be satisfied and phase switching overhead can be minimized. The first algorithm is based on the branch and bound method, which identifies an optimal solution. The second is a fast heuristic algorithm. The experimental results show that the execution time of the algorithm based on branch and bound is less than that of the heuristic algorithm when the network is complex and that the performance of the heuristic algorithm is close to the optimal solution.

• Journal of Advanced Navigation Technology
• /
• v.13 no.2
• /
• pp.238-243
• /
• 2009

Now, the production process systems are largely based on automatic system using the wired network. The production process systems using wired network has disadvantage that it is expensive when the installed and replaced equipment. The each equipment happens to repair cost for control and management in production processes. And the replaced equipment has also the additional expense and breaks production process. These problems are solved through wireless communication between the industrial equipments. So, we propose wireless production process system based on IEEE 802.15.4 technology. It solves a complicated space and stops by replaced equipment in the factory. Then we simulated and analyzed IEEE 802.15.4 for Industrial Equipment based on Wireless Network.

• Proceedings of the KIEE Conference
• /
• 2006.04a
• /
• pp.102-104
• /
• 2006

Auto-Correlated time series (ATS) model was constructed by using the backpropagation neural network. The performance of ATS model was evaluated with sensor information collected from a large volume, industrial plasma-enhanced chemical vapor deposition system. A total of 18 sensor information were collected. The effect of inclusion of past and future information were examined. For all but three sensor information with a large data variance demonstrated a prediction error less than 4%. By integrating ATS model into equipment software, process quality can be more stringently monitored while improving device throughput.

• IE interfaces
• /
• v.24 no.2
• /
• pp.156-163
• /
• 2011

The radiopharmaceutical synthesis for PET (positron emission tomography) is composed of chemical reactions using automated synthetical equipment. Due to the radioactive material, the automated equipment is being frequently developed to replace human operators who conduct dangerous, repetitive and dexterous operations. As to operation, the manipulating program is commonly coded using the spread sheet while the whole actuators are mapped in every step. The process map (program) is changed according to such parameters as temperature of reactor, keeping time, mixture sequence and amount of reagent. In cases of customizing the automated synthetical equipment or developing the new radiopharmaceuticals, lots of experiments should be conducted and the programming mistake is not allowed as it can lead abnormal control of the equipment to leak the radioactive materials. The exact process map has depended on trial and error manner. Thus, this study developed the methodology to tabulate the synthetical process to convert the process map automatically while the synthetical module formation is represented by a network model. The proposed method is validated using the actual radiopharmaceutical synthetical procedure.

• Journal of Satellite, Information and Communications
• /
• v.12 no.1
• /
• pp.88-93
• /
• 2017

Policy maker inevitably faces two restraints once they attempt to accomplish $4^{th}$ Industrial Revolution through development of Industrial Internet of Things(i.e. IIoT). One is to construct physical network by substituting old equipment and infrastructure into smart equipment and the other is to connect the physical network into national telecommunications infrastructure. Australia, as she proceeds National Broadband Network programme, has assembled all medium of telecommunications to provide every Australian premises regardless to its physical location by creating wholes-sale only carrier, NBN co. At the same time, Australian government also provides its own IIoT policy; Co-development and New-Development projects. Meanwhile, NBN co. has launched its own two communication satellites in 2015 and 2016 to replace the old satellite communication services depended on the other companies' satellites. This article, in the end, analyses the role of satellite communication in $4^{th}$ industrial revolution with case study on Australian policy.