• Proceedings of the KIPE Conference
• /
• 1997.07a
• /
• pp.166-170
• /
• 1997

A Single phase induction motor is the predominant fractional horsepower power rated, extensively used in domestic and industrial application. For example, these motors provide the motive power to washing machines, fans, refrigerators, etc. In this paper, single phase induction motor input current was detected by a small current transformer and determined TRIAC gate signal by using op-amp analog circuit. The soft-start strategy is based on limited auxiliary current angle during starting period in the closed-loop control. The Simulation and experimental result show the motor's starting characteristics of the proposal starting system and are compared with centrifugal switch starting motor.

• Laser Solutions
• /
• v.8 no.3
• /
• pp.27-30
• /
• 2005

Nowadays, most automotives companies are making use of laser welding in car body assembly shop. But even though laser welding is better than resistance spot welding in many points, its application has been limited to special technology for manufacturing. The paper introduces in the field of remote welding system (RWS) to improve the process efficiency of laser welding. Positioning time of RWS between welding stitches is dramatically reduced to zero. It is a kind of solutions to generalize laser welding in mass production. This RWS consists of fiber laser, industrial robot and 3-axis scanner.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2005.05a
• /
• pp.258-263
• /
• 2005

The nearest variety of the industrial world requires using the high precision and resolution positioning technology to do a semi-conductor, information field , and measurement field. It is especially important for the positioning technology that makes up a proper controller, is affected by the minimal heat and vibration, and can control a structurally generated non-linear friction factor to determine the efficiency of the system. The paper is to analyze the vibration characteristic according to the speed of linear motor and grasp the dynamic characteristic through the modal test and show the verification of the experimental result and design parameters by using FEM(Finite Element Method). Also, it shows the optimum standard analyzed the acceleration patterns of the moving part that lead to the vibration source in linear motor. It presents the analyzed dynamic of linear motor in compliance with a change of the non-linear factor.

• Proceedings of the KIPE Conference
• /
• 2001.12a
• /
• pp.3-6
• /
• 2001

This paper designs a drive for high efficiency of the 3-phase IM (induction motor) for FCU(Fan Coil Unit). The speed control system of 3-phase IM for FCU has been implemented by a TMS320LF2406 DSP chip. The DSP TMS320LF2406, which include the most peripheral circuit for control of the Industrial motor suitable for AC motor drive. This type of the controller can be obtained low cost and high reliance. The proposed drive system of the 3-phase IM for the FCU is verified by simulation. The results show the speed control characteristics of the control strategy Proposed for 3-Phase IM drive.

• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 2005.05a
• /
• pp.449-454
• /
• 2005

Brushless DC Motor(PM BLDCM) is widely used in industrial applications due to its high efficiency and power density. In order to increase reliability and reduce system cost, this paper studies particularly applicable method for sensorless PM BLDCM drive system. The resulting third harmonic signal keeps a constant phase relationship with the rotor flux for any motor speed and load condition, and is practically free of noise that can be introduced by the inverter switching, making this a robust sensing method. As a result, the method described here is not sensitive to filtering delays, allowing the motor to achieve a good performance over a wide speed range. In addition, a simple starting method and a speed estimation approach are also proposed.

• Proceedings of the KIEE Conference
• /
• 2004.10a
• /
• pp.83-85
• /
• 2004

Recently, a high-speed motor has been generating a lot of attention due to its performance-more light, thin, short, compact than ordinary moters. This paper descirbes the design of the small high-speed BLDC motor with the ratings of 0.5HP and 70 000 rpm for industrial application such as machine tool. Simulation results are given, which show that motor efficiency of higher than 80%.

• Journal of the Korean Society of Industry Convergence
• /
• v.20 no.1
• /
• pp.81-87
• /
• 2017

In order to reduce the weight of the blow motor case and to maintain the strength of the motor joint, the mechanical joining strength is to be predicted. The true stress - true strain curves for finite element analysis were obtained through tensile tests of HGI and DP 780 steel. The mechanical joining strength was predicted through an explicit finite element analysis and the accuracy of the predicted results was verified by actual sample test. The regression equation for predicting the mechanical joining strength to the thickness of the DP 780 steel was derived. The minimum thickness of DP 780(1.2mm), which is equivalent to the joining strength of HGI(2.6mm), was derived from the equation.

• Proceedings of the KAIS Fall Conference
• /
• 2011.05b
• /
• pp.599-601
• /
• 2011

최근의 차량 연비는 고가의 연료 가격과 환경 규제 등으로 인하여 중요한 문제로 대두되었다. 전기, 전자, 반도체, 기계 등의 기술 발달은 연비 개선에 많은 공헌을 하였다. 그러나 연비 측정은 현재도 주어진 모드(LA-4, FTP-75 등)에서 컴퓨터 모의시험 및 다이나모에서 수행한다. 이렇게 측정한 연비는 실제 도로 주행 연비와 차이가 발생하는데, 그 주요 원인중의 하나는 도로의 경사를 고려하지 않았기 때문이다. 본 논문에서는 경사가 심한 영동고속도로를 정속 주행하여 연료 소모량을 측정하고 연비를 계산한다. 또한 같은 도로를 경사가 없다고 가정하여 주행한 연비와 비교 분석한다. 이때 두 경우를 비교하여 경사에 의해 소모된 연료량 차이를 계산하고, 이 타이어 구동력과 엔진에서 소모된 연료량과의 관계를 검증한다.

• The Transactions of the Korean Institute of Electrical Engineers B
• /
• v.49 no.6
• /
• pp.380-386
• /
• 2000

This paper presents the mathematical modelling analysis of Brushless Synchronous Motor(BLSM). The dynamic and the steady state characteristics of BLSM are simulated and analyzed : electromagnetic torque, speed, line voltage, and current. We used mathematical modelling to model of BLSM with sinusoidal back EMF, namely the shaft transformation referencing rotor frame from a, b, c three to produce constant torque like synchronous motor. The experiment result has already similar to compare with simulation result : torque error about 7%, speed error about 5%. The validity of proposed modelling and analysis was confirmed by the experimental result.

• The Transactions of the Korean Institute of Electrical Engineers
• /
• v.38 no.12
• /
• pp.1041-1047
• /
• 1989

In recent years, a.c servomotors have been gradually replacing d.c servomotors in various high-performance applications such as machine tools and industrial robots. Inparticular, the high performance slip-frequency control of an induction motor, which is often called the vector control, is considered ane of th ebest a.c drives. In this paper, the transient state equations and vector control algorithms of an induction type servomotor are described mathematically by using the two- axis theory (d-q coordinates). According to the result of these algorithms, we scheme the speed control system for the motor in which the vector control is adopted to give high performance. Motor drive through a PWM inverter with power MOSFET is controlled so that the actual input current to the motor may track the current reference obtained from a micro-computer (8086 CPU). Driving experiments are performed in the range of 0 to 3000 rpm, and it is verified that high speed response is obtained for this system.