• Proceedings of the KIEE Conference
• /
• 1998.07f
• /
• pp.1987-1989
• /
• 1998

A single phase induction motor is predominant in fractional horsepower rating and is widely used in home and industrial equipment. For example, these motors provide the motive power to washing machines, fans, refrigerators, etc. In this paper has presented the design and implementation of a microcontroller software - based self - starting SPIM. The control algorithm used in the experimentation employed simple control strategies which enabled a single chip programmable microcontroller to execute both the self - starting and self - detecting control of SPIM with relatively simplified hardware.

• Proceedings of the KIEE Conference
• /
• 2006.07b
• /
• pp.793-794
• /
• 2006

본 논문은 Slotless BLDC 모터를 고출력화 하기 위해서 나선형(Helical)방식을 적용하여 모터의 고출력화를 이루는 방식에 대한 연구이다. 기존의 SlotlessBLDC모터는 코깅이 없고, Slot이 없으므로 소형화에 유리한 장점을 지녔다. 반면에 공극의 자속 밀도가 낮아 출력을 높이는데 한계가 있었다. 따라서 본 논문에서는 기존의 SLBLDCM의 단점을 극복할 수 있는 Helical 방식을 제안하였다. Helical 방식을 적용할 때 기존의 인덕턴스 영향으로 인한 전류 확립에 한계가 있었으나 본 방식을 적용 시 높은 전류를 흘릴 수 있었으며 이로 인해 고출력화를 이룰 수 있었다. 아울러 Helical 방식을 취하므로 높은 전류로 인한 발열문제까지도 동시에 해결할 수 있는 장점이 있었다. 본 논문에서는 Helical 방식을 적용하여 기존대비 출력을 15%이상 향상시킬 수 있었으며, 온도 상승도 10%이상 억제할 수 있었다.

• Proceedings of the KIEE Conference
• /
• 1994.07a
• /
• pp.12-14
• /
• 1994

In industrial drive of the BDCW motor, voltage source inverter is of tenly used. In this paper in operation of the inverter for the BDCM drives, some PWM techniques are applied and the mathematical torque ripple model is developed to investigate the performance of the PWM techniques. The simulation results show that the multiple pulse modulation is practically introduces the lowest torque ripple components.

• Proceedings of the KIEE Conference
• /
• 2003.04a
• /
• pp.88-90
• /
• 2003

SRM has a characteristic of a robust, simple structure and wide operating ranges. So, recently it has studied and developed in many kinds and forms with the technology of power electronics and analysis and design by use of computer. Also, It is used in a very wide range of industrial applications. In particular, single phase switched reluctance motor has a merit in practical use because it has simple operating drives and control systems, very high energy density per unit volume comparing with three phase SRM. But it must have a starting device. In this paper design procedures of single phase SRM development for blower drives are presented. It is selected the design parameters by compared with design theory of general electric machine and poly phase SRM. Also it is simulated the designed prototype model by FEM for the prediction of characteristics.

• International Journal of Reliability and Applications
• /
• v.9 no.1
• /
• pp.17-30
• /
• 2008

Analysis of measurement systems is important to determine if the measurement process is adequate to measure the part-to-part variability in the process. Control chart techniques provide an effective, and easy-to-use method for performing this analysis. However, application with the real data for the evaluation procedure for multiple measurement systems have not been demonstrated. This research will provide a methodology for the evaluation of part-to-part variation and variation of different measurement systems step by step followed by number of case studies for each methodologies provided.

• International Journal of Reliability and Applications
• /
• v.9 no.1
• /
• pp.7-15
• /
• 2008

The dimensional measurement equipment, such as Coordinate Measurement Machine (CMM), Optical Coordinate Measurement Machine (OCMM), and Checking Fixture (CF), take multiple dimensional measurements for each part in an automobile industry. Measurements are also recorded under different measurement systems to see if the responses differ significantly over these systems. Each measurement system (CMM, OCMM, and CF) will be considered as different treatments. This set-up provides massive amounts of process data which are multivariate in nature. Therefore, the multivariate statistical analysis is required to analyze data that are dependent on each other. This research provides step by step methodology for the evaluation procedure of the compatibility of measurement systems and clarify a systematic analyzation among the different measurement system's compatibility followed by number of case studies for each methodologies provided.

• Journal of the Korea Safety Management & Science
• /
• v.15 no.1
• /
• pp.141-150
• /
• 2013

In this paper, the learnability of haptic icons was tested as a way of conveying turn-by-turn directions to users involved in navigation interactions with commercial smartphones. To do this, six most distinctive haptic icons were identified from those having different duration of each pulse, interval between pulses, and rhythm. Associations between the selected haptic icons and 3 pairs of navigation directions were analyzed using data gathered from 30 subjects by 7 point Likert scale. The haptic icons were then assigned to proper directions based on the results from that stereotype analysis. The results showed that the commercial smartphone with one linear motor at a fixed location is not capable of making hapticons to have clear directional stereotypes. The hapticons with poor stereotypes has no advantage in learnability compared to those of random assignment.

• Proceedings of the Korean Society of Computer Information Conference
• /
• 2018.07a
• /
• pp.347-348
• /
• 2018

4차 산업혁명시대가 도래함에 따라 대학에서의 창의력과 융합력 기반의 교육과정이 첨차 중요시 되고 있다. 이에 본 논문에서는 개발에 소요되는 시간이 짧고 비 공학 전공자도 쉽게 개발 가능한 동시에 창의성과 독창성을 갖춘 자율 로봇의 제작 과정을 제안한다. 제작되는 로봇에는 초음파 센서(ultrasonic sensor), 컬러센서(color sensor), 미디엄 모터(medium motor), 그리고 이를 동작하기 위한 그래픽 기반의 프로그램이 하나로 융합되어 최종 결과를 도출하고 제시되는 다양한 임무를 적절히 수행하는 것을 보인다.

• Proceedings of the KIEE Conference
• /
• 1997.07a
• /
• pp.215-217
• /
• 1997

본 논문에서는 유한요소 해석을 통한 리액턴스 보정 방법을 제안한다. 동기 리액턴스는 대상 전동기의 유한요소 해석을 통하여 자계 분포를 계산하여 구할 수 있고 엔드 누설 리액턴스는 3차원 유한요소 해석의 결과로부터 계산하여 보정한다. 제안된 보정 과정을 추가한 자기 등가회로법으로 교류 서보 전동기를 해석한 결과와 실험치를 비교하여 본 논문의 해석 방법의 타당성을 확인한다. 이러한 연구를 통해서 교류 서보 전동기 뿐 아니라 일반 전동기를 해석함에 있어서 리액턴스를 보다 정확히 고려할 수 있고 고정밀의 전동기를 설계하는 데에도 유용하게 사용될 수 있을 것이다.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.20 no.6
• /
• pp.843-847
• /
• 2010

Recently, one of the most interesting issue in the intelligent robot and the industrial robot area is the design and an implementation of servo driver module based on motion network for hollow type joint module of all-in-one structure. In this paper, we designed and implemented for hollow type driver, and also verified the performance of the developed module through the experiment.