• Proceedings of the KIPE Conference
• /
• 2002.07a
• /
• pp.447-450
• /
• 2002

A study on control of BLDC Is studying In progress, because of radical increase of survo motor at industrial machine and home machine. Nowaday, we study on control of BLDC, because of radical increase of survo motor at Industry and home. Although control ratio and output of the unit volume are good than the others , BLDC motor demands high cost. Therefor, the study on low cost BLDC have square wave back-emf is studing in progress. Therefor, BLDC Motor was studied to reduce high cost that have square wave back-emf at recently. This paper shows that BLDC Motor, developed highly responsility by using Genetic Algorithm(GA) that the advantages of learning ability, Also, this paper shows experiment and simulation at 200W BLDC that have squarewave back-emf by using Genetic Algorithm. At the result of this methods, the study prove experiment's right.

• Journal of the Korean Society for Precision Engineering
• /
• v.27 no.10
• /
• pp.23-28
• /
• 2010

Resistance trimming and cutting processes of printed circuit board by making use of high power UV laser with nano-second pulse width have been proposed and investigated experimentally. Also laser-based application system with high flexibility and complex has been designed and adopted power controller, auto beam size control, auto-focusing and control program developed for ourselves. The function of each module shows that they can be reliable for industrial equipments. Resistance trimming method used a plunge and double cut process with $20{\mu}m$ spot size beam. Results show that double cut process is more effective to control resistance trimming in precision than plunge cut process.

• Journal of Biosystems Engineering
• /
• v.27 no.6
• /
• pp.521-528
• /
• 2002

Rotary and plow implements are mainly utilized for the tillage operation in Korea, and a implement control system for agricultural tractors was designed and fabricated to improve the working accuracy and efficiency. The control system was composed of three units: 1) sensors fur detection of angle of liftarm, draft force, engine rpm, tillage depth and so on, 2) a controller, and 3) hydraulic circuits, which included solenoid valves and so on, for operation of three point linkage and implements. The control system can control the speed(high and low speed) of implements by adjusting input flow rates of the hydraulic cylinder which was controled by two speed valve, which was composed of a solenoid valve and a orifice. Indoor experiments were conducted to evaluate response characteristics of the designed implement control system under experimental conditions of various engine nm, two kinds of input flow rates of the cylinder and some input frequency. The results of experiments showed the response characteristics sufficient to use as the implement control system fur agricultural tractors.

• The Journal of Korea Robotics Society
• /
• v.11 no.4
• /
• pp.270-276
• /
• 2016

This paper proposes a design methodology of self-reconfigurable kinematics and control engine for modular and reconfigurable robots. A modular manipulator has been proposed to meet the requirement of task adaptation in versatile needs for service and industrial robot area and the function of self-reconfiguration is required to extend the application of modular robots. Kinematic and dynamic contexts are extracted from the module and assembly information and related codes are automatically generated including controller. Thus a user can easily build and use a modular robot without professional knowledge. Simulation results are presented to verify the validity of the proposed method.

• Proceedings of the KAIS Fall Conference
• /
• 2009.05a
• /
• pp.244-248
• /
• 2009

본 논문에서는 만타형상의 무인잠수정의 운동성능과 제어기설계에 대한 성능을 확인하기 위한 수학모델을 정립하여 시뮬레이션 프로그램을 개발하였다. 본 논문에 사용된 수학모델은 6자유도 운동방정식을 이용하여 Matlab / Simulink를 이용하여 시뮬레이션 프로그램을 개발하였다. 개발된 시뮬레이션 프로그램을 이용하여 만타형상무인잠수정(Manta-type unmanned underwater test vehicle)의 동역학적 운동성능을 해석하였으며, 무인잠수정의 제어성능을 해석하기 위하여 PID(비례-미분-적분)제어기와 슬라이딩모드(Sliding mode)제어기를 설계하여 만타형상무인잠수정의 제어 성능을 해석하였다. 설계된 제어기는 무인잠수정의 수심제어와 방향각제어에 사용되었다. 설계된 제어기의 성능을 확인하기 위하여 미국 해군대학원(Naval Postgraduate School)의 AUV II와 비교하였다. 설계된 수심제어와 방향각 제어기를 이용하여 만타형무인잠수정의 설계 목표에 부합하는 항해제어시뮬레이션을 실시하였다.

• The Transactions of the Korean Institute of Electrical Engineers B
• /
• v.48 no.5
• /
• pp.257-263
• /
• 1999

Recently the performance of CO2 arc welding machine has been advanced significantly through the adoption of inverter circuit topology which made it possible to control the waveform of welding current and thus to suppress the spatter generation. However, the optimum waveform is still uncertain. As a first step for figuring out the promising waveforms, this study was performed to set-up the experimental system for studying the effect of waveform variables, The system designed in this study is a digital controller using single chip microprocessor of 80C196KC. As a result of performance test of this system, it was demonstrated all of the waveform variables could be set individually and the resultant waveforms appeared to be pretty much the same as the intended one.

• Proceedings of the KIEE Conference
• /
• 2002.07d
• /
• pp.2325-2327
• /
• 2002

포항 가속기연구소(PAL)에서는 포항방사광가속기(PLS)가 가동을 시작한 1994년 이후 현재까지 사용되어 온 기존의 제어 시스템을 새로운 환경인 EPICS(Experimental Physics and Industrial Control System) 시스템으로 개발하고 있다. EPICS 시스템의 구성은 IOC(Input/Ouput Controller) 와 OPI(Operator Interface)의 2-Layer로 구성되며 이는 MIU(Machine Interfaces Unit), SCC(Subsystem Computer Control System) 그리고 HMI(Human Machine Interface)로 이어지는 기존의 3-Layer 단계 중 SCC단계를 줄여 2-Layer로 구성된다. 이들 두 계층간의 통신은 Client(OPI)/Server(IOC) 구조의 Channel Access를 통해서 이루어진다. 개발중인 EPICS 시스템은 Open Architecture 구조로 IOC와 OPI 각 부분에서 개발시에 사용된 운영체제나 Hardware 를 사용하지 않고 다른 운영체제나 Hardware를 사용하더라도 하나의 공통부분 즉, Channel Access만 있으면 이를 통해 서로 다른 Subsystem IOC의 데이터를 Access할 수 있다. 전체 EPICS 제어시스템 중 저장링 운전의 핵심이 되는 BPM(Beam Position Monitoring) 및 MPS(Magnet Power Supply) 시스템은 IOC부분에 MVME5100(Target Machine) 보드와 vxWorks(Operating System)를 이용하고 OPI부분에는 SUN Workstation(Host Machine)와 Solaris(Operating System)을 사용하여 개발하고 있다. 본 논문에서는 IOC 및 OPI의 설치 절차와 설치 방법에 대해 기술하였다.

• Journal of Korea Society of Digital Industry and Information Management
• /
• v.10 no.1
• /
• pp.73-79
• /
• 2014

In this study, the unmanned vehicle to develop a preliminary step, we were facilities for Automated Guided Vehicle (AGV) simulator is designed and implemented. Industry is increasingly the more advanced automation and management systems need to be efficient. These studies are at least 24-hour continuous unmanned vehicles and personnel can result in reduction of labor costs. In addition, safety accidents can be minimized in the industry as an effect of intelligent AGV is essential. This study is the initial step for the development of AGV. manufactured simulator to Simulation and drives the performance of the system is evaluated. The configuration of the simulator, ultrasonic sensors, infrared sensors, and using the obstacle were to follow a given path. In addition, two-way communication between the host computer and the main processor that was. communication method that IEE802.11 meets the standard is applied to high-speed wireless LAN systems, each of the sensor information is calculated. AGV having a drive shaft 4 of the four wheels are respectively independent structure. AGV's main processor is driven using a high-performance DSP, and the controller controls the steering device of the load could be significantly reduced.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2001.10a
• /
• pp.552-555
• /
• 2001

From the dissertation which it sees micro it is strong with the technical development which the computer and communication field is quick and efficiency improvement and control LAN (Local Area Network) this utility anger becomes with the pliability regarding a system construction to come to be high, central processing unit (CPU) function it separates especially and the LAN communication railway line (Data way) it uses and the controller royal tomb of process disperses, the information control and watch and operation fabrication function composes an anger making whole system intensively development background and application process and the right season of the dispersion control system which plans a reliability improvement, war potential and environment, possibility control, From industrial site of the petrochemistry back application and it investigated the dispersion control system which is applied to observe in many sidedness and until course of development of report hereafter dispersion control system it tried.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2015.10a
• /
• pp.1058-1059
• /
• 2015

최근 건축 구조물 설계에 있어서 외부 또는 내부로부터 발생될 수 있는 미지의 진동에 대하여 대책을 수립하여 구조물을 설계하고 있다. 뿐만 아니라 기타 제조업 분야에 있어서 정밀할 가공이 필요한 특수한 기계 가공기에 있어서 내부 또는 외부에서 발생될 수 있는 진동을 감안하여 시스템을 구성하고 있다. 이러한 구조물 및 기계시스템에 대하여 진동을 억제할 수 있는 진동 억제 알고리즘에 관해서는 많이 연구되고 있다. 본 논문에서는 구조물 및 기계시스템에서 발생될 수 있는 미지의 외란을 제거하기 위하여 내부모델제어(IMC)를 기반으로 수정된 적응 알고리즘을 매트랩 시뮬링크(matlab simulink)를 통하여 제어성능을 제시하고자 한다.