• Journal of the Korean Institute of Intelligent Systems
• /
• v.15 no.2
• /
• pp.264-269
• /
• 2005

Advances in sensors, actuators, and computers and developments In information systems offer unprecedented opportunities to implement highly ambitious automation, control and decision strategies. There are also new challenges and demands for control and automation in modern industrial practices. There is a growing need for an active participation from the information systems in industrial, manufacturing and process industry environments because currently there are many control problems. This paper provides pattern recognition to the monitoring system for solvent manufacturing process and shows performance in real-time response with multiple input signals. Data is teamed by a multilayer feedforward network trained by error-backpropagation. The two kinds of test results show that the trained network has the ability to show the current system status with different input data sets.

• 제어로봇시스템학회:학술대회논문집
• /
• 2001.10a
• /
• pp.133.5-133
• /
• 2001

The real-time industrial network, often referred to as fieldbus, is an important element for building automated manufacturing systems. Thus, in order to satisfy the real time requirements of field devices such as sensors, actuators, and controllers, numerous standard organizations and vendors have developed various fieldbus protocols. As a result, IEC 61158 protocol including Profibus, WorldFIP, and Foundation Fieldbus is recently announced as an international standard. Many fieldbus protocols have an important advantage over the widely used protocols such as Ethernet (IEEE 802.3) in terms of the deterministic characteristics of the fieldbuses. However, the application of fieldbus has been limited due to the high cost of hardware and the difficulty in interfacing with multi-vendor products. In order to solve these problems, computer network ...

• International Journal of Precision Engineering and Manufacturing
• /
• v.3 no.3
• /
• pp.12-20
• /
• 2002

As numerous sensors and actuators are used in many automated systems, various industrial networks are adopted for real-time distributed control. In order to take advantages of the networking, however, the network implementation should be carefully designed to satisfy real-time requirements considering network induced delays. This paper presents an implementation scheme of a networked control system via Profibus-DP network fur real-time distributed control. More specifically, the effect of the network induced delay on the control performance is evaluated on a Profibus-DP testbed. Also, two conventional PID gain tuning methods are slightly modified fur fouling controllers fur the networked control system. With appropriate choices for gains, it is shown that the networked control system can perform almost as well as the traditional control system.

• Journal of Industrial Technology
• /
• v.19
• /
• pp.9-14
• /
• 1999

The voice coil actuator uses the Lorentz force between the magnetic field of the permanent magnets and the electromagnets to the motions and positioning. The small size, light weight and fast dynamic response of the these type actuators lead to admit them in the micro-positioning apparatus of the micro-machining systems. In this paper, the linear motion voice coil actuator is developed for the driving and positioning the rotating electrode of the electric discharge machine (EDM). The analyzed and measured results for the actuator are compared and discussed.

• Journal of the Korean Society for Precision Engineering
• /
• v.18 no.5
• /
• pp.120-129
• /
• 2001

As many sensors and actuators are used in many automated systems, various industrial networks are adopted for real-time distributed control. In order to take advantages of the networking, however, the network implementation should be carefully designed to satisfy real-time requirements considering network delays. This paper presents the implementation of a remote feedback control system via Profibus-DP net work for real-time distributed control More specifically, the effect of the network delay on the control performance evaluated on Profibus-DP testbed. Also, the traditional PID gain tuning methods are used to demonstrate the feasibility of the remote feedback control.

• Smart Structures and Systems
• /
• v.17 no.2
• /
• pp.195-208
• /
• 2016

Seismic isolation systems are essentially designed to preserve structural safety, prevent occupants injury and properties damage. An active saturated LMI-based control design is proposed to attenuate seismic disturbances in base-isolated structures under saturation actuators. Using a mathematical model of an eight-storied building structure, an active control algorithm is designed. Performance evaluation of the controller is carried out in a simplified model version of a benchmark building system, which is recognized as a state-of-the-art model for numerical experiments of structures under seismic perturbations. Experimental results show that the proposed algorithm is robust with respect to model and seismic perturbations. Finally, the performance indices show that the proposed controller behaves satisfactorily and with a reasonable control effort.

• Journal of Applied Reliability
• /
• v.5 no.4
• /
• pp.487-500
• /
• 2005

MEMS devices usually have micro actuators contained in a cavity, If the pressure level of testing chamber is higher than that of cavity, moisture will ingress into the cavity, which may cause critical failure such as stiction of the moving parts. To design an accelerated life test based on high temperature and high humidity, such a phenomena should be considered. In this study, a throughput model that can estimate the amount of moisture ingress is used to decide the testing time and conditions of a high temperature and high humidify test.

• The Journal of Korea Robotics Society
• /
• v.16 no.1
• /
• pp.35-40
• /
• 2021

As the robot industry develops, industrial automation uses industrial robots in many parts of the manufacturing industry. However, rigidity-based conventional robots have a disadvantage in that they are challenging to use in environments where they grab fragile objects or interact with people because of their high rigidity. Therefore, researches on soft robot have been actively conducted. The soft robot can hold or manipulate fragile objects by using its compliance and has high safety even in an atypical environment with human interaction. However, these advantages are difficult to use in dynamic situations and control by the material's nonlinear behavior. However, for the soft robot to be used in the industry, control is essential. Therefore, in this paper, real-time PD control is applied, and the behavior of the soft actuator is analyzed by providing various waveforms as inputs. Also, Iterative learning control (ILC) is applied to reduce errors and select an ILC type suitable for soft actuators.

• Smart Structures and Systems
• /
• v.14 no.4
• /
• pp.517-539
• /
• 2014

The combined use of smart materials, complementing each others' characteristics and resulting in devices with optimised features, is providing new solutions in many industries. The use of ingenious combinations of smart materials has led to improvements in actuation speed and force, signal-to-noise ratio, sensor precision and unique capabilities such as self-sensing self-healing systems and energy autonomy. This may all give rise to a revival for numerous families of smart materials, for which application proposals had already reached a stationary situation. It may also provide the boost needed for the definitive industrial success of many others. This study focuses on reviewing the proposals, preliminary studies and success cases related to combining smart materials to obtain multifunctional, improved systems. It also examines the most outstanding applications and fields for the combined use of these smart materials. We will also discuss related study areas which warrant further research for the development of novel approaches for demanding applications.

• Journal of Institute of Control, Robotics and Systems
• /
• v.17 no.2
• /
• pp.176-182
• /
• 2011

Industrial network, often referred to as fieldbus, becomes an indispensable component for intelligent manufacturing systems. Thus, in order to satisfy the real-time requirements of field devices such as sensors, actuators, and controllers, numerous fieldbus protocols have been developed. But, the application of fieldbus has been limited due to the high cost of hardware and the difficulty in interfacing with multi-vendor products. As an alternative to fieldbus, the Ethernet (IEEE 802.3) technology is being adapted to the industrial environment. However, the crucial technical obstacle of Ethernet is its non-deterministic behavior that cannot satisfy the real-time requirements. Recently, the EtherCAT protocol becomes a very promising alternative for real-time industrial application due to the elimination of uncertainties in Ethernet. This paper focuses on the implementation of the IEC 61800 based real-time EtherCAT network for multi-axis smart driver. To demonstrate the feasibility of the implemented EtherCAT slave module, its synchronization performance is evaluated on the experimental EtherCAT testbed with a single axis smart driver.