• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.45 no.5
• /
• pp.58-64
• /
• 2008

A 6Gbps 1:2 demultiplexer(DEMUX) IC using $0.18{\mu}m$ CMOS was designed and fabricated. For high speed performance current mode logic(CML) flipflop was used and inductive peaking technology was used so as to obtain higher speed than conventional Current mode logic flipflop. On-chip spiral inductor was designed to maximize the inductive peaking effect using stack structure. Total twelve inductors of $100{\mu}m^2$ area increase was used. The measurement was processed on wafer and 1:2 demultiplexer with and without micro stacked spiral inductors were compared. For 6Gbps data rate measurement, eye width was improved 7.27% and Jitter was improved 43% respectively. Power consumption was 76.8mW and eye height was 180mV at 6 Gbps

• Reproductive and Developmental Biology
• /
• v.33 no.4
• /
• pp.263-271
• /
• 2009

Cardiovascular diseases (CVDs) are one of the most cause of death around the world and fields of interest for cardiac stem cells. Also, current use of terminally differentiated adult cardiomyocytes for CVDs has limited regenerative capacity therefore any significant cell loss may result in the development of progressive heart failure. Human embryonic stem cells (hESCs) derived from blastocyst-stage embryos spontaneously have ability to differentiate via embryo-like aggregates (endoderm, ectoderm and mesoderm) in vitro into various cell types including cardiomyocyte. However, most effective molecule or optimized condition which can induce cardiac differentiation of hESCs is rarely studied. In this study, we developed both spontaneous and inductive cardiomyocyte-like cells differentiation from hESCs by treatment of induced-factors, 5-azacytidine, BMP-4 and cardiogenol C. On the one hand, spontaneous and inductive cardiomyocyte-like cells showed that cardiac markers are expressed for further analysis by RT-PCR and immunocytochemistry. Interestingly, BMP-4 greatly improved homogeneous population of the cardiomyocyte-like cells from hESCs CHA15 and H09. In conclusion, we verified that spontaneously differentiated cells showed cardiac specific markers which characterize cardiac cells, treated extrinsic factors can manage cellular signals and found that hESCs can undergo differentiation into cardiomyocytes better than spontaneous group. This finding offers an insight into the inductive factor of differentiated cardiomyocytes and provides some helpful information that may offer the potential of cardiomyocytes derived from hESCs using extrinsic factors.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.19 no.1
• /
• pp.35-40
• /
• 2015

The paper proposes a meta-learning approach for building multi-classifier systems in a GA-based inductive learning environment. In our meta-learning approach, a classifier consists of a general classifier and a meta-classifier. We obtain a meta-classifier from classification results of its general classifier by applying a learning algorithm to them. The role of the meta-classifier is to evaluate the classification result of its general classifier and decide whether to participate into a final decision-making process or not. The classification system draws a decision by combining classification results that are evaluated as correct ones by meta-classifiers. We present empirical results that evaluate the effect of our meta-learning approach on the performance of multi-classifier systems.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.16 no.2
• /
• pp.287-292
• /
• 2021

In this paper, we propose an efficient CNN application method by analyzing the effect of activation function on the failure diagnosis of the inductive motor stator. Generally, the main purpose of the inductive motor stator failure diagnosis is to prevent the failure by rapidly diagnosing the minute turn short. In the application of activation function, experiments show that the Sigmoid function is 23.23% more useful in accuracy of diagnosis than the ReLu function, although it is shown that ReLu has superiority in overall fixer failure in utilizing the activation function.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.23 no.2
• /
• pp.111-116
• /
• 2019

New technologies such as the IoT, Big Data, and Artificial Intelligence, starting from the Web, mobile, and smart device, enable new business models that did not exist before, and various types of Internet companies based on these business models has been emerged. In this research, we examine the factors that influence the success and failure of Internet companies. To do this, we review the recent studies on business model and examine the variables affecting the success of Internet companies in terms of network effect, user interface, cooperation with actors, creating value for users. Using the five derived variables, we will select 14 Internet companies that succeeded and failed in seven commercial business model categories. We derive decision tree by applying inductive learning based on ID3 algorithm to the analysis result and derive rules that affect success and failure based on derived decision tree. With these rules, we want to present the strategic implications for actors to succeed in Internet companies.

• Proceedings of the Ginseng society Conference
• /
• 1990.06a
• /
• pp.58-64
• /
• 1990

The effects of ginseng saponins, G-Rbl and G-Rc on the rat liver LDH A-gene transcnptional activity was investigated during pro-replicative phase of rat liver after partial hepatectomy. Changes in LDH A-mRNA levels in regenerating rat liver after intraperitoneal administrations of G-Rbl of G-Rc were tested by slot blot hybridization methods. The results showed that G-Rbl (1 mg/100g B.W) and G-Rc (1 ma/100g B.W) caused marked increases of LDH A-mRNA contents by respectively 1.9- and 1.5-fold in rat liver at 5·hours after partial hepatectomy. Dose dependent effect of G-Rbl and G-Rc (1-25 mg/100g B.W) on the LDH A-mRNA levels on regenerating rat liver were also analyzed. The maximal in- creases of liver LDH A-mRNA levels were observed with the doses of 1 mg for G-Rbl and 5 mg for G-Rc However, when the administration doses of G-Kbl and G-Rc were increased to 20 mg, G-Rbl caused a marked decrease of LDH A-mRNA level to 61% of those in sham-operated rat liver In contrast, G-Rc slightly decreased the liver LDH A-mRNA contents by 30% as compared to those of the maximum value but still maintained 22% higher LDH A-mRNA levels then those of sham-operated rate liver. On the basis of these experimental results, we conclude that ginseng saponin, G-Rb 1 and G·Rc have stimulatory effect at the lower concentration (1 mg/100g B.W) and inhibitory effect at the higher concentration (20 moi loos 5.W) on the LDH A-gene transcription during regeneration of rat liver, Additionally we also investigated the stimulatory effects of ginsenosides on the protein and DNA synthetic activities in hepatocyte primary cell cultures isolated from regenerating rat liver. Both of G·Rc and -Re increased the synthetic rates of hepatocytes proteins and DNA at the administration doses of 50 ug and 100 ug/3 ml/dish respectively representing 1.3-1.6 fold increases. From these results we postulate that G-Rc and -Re may have a mitogen enhancer activity for the hepatocyte proliferation during rat liver regeneration period. Keywords Inductive effects of ginsenosides, G-Rb, -Rc, and -Re, rat LDH A-gene transcription, the sin thetic rate of proteins and DNA in regeneration rat liver.

• Bulletin of the Korean Chemical Society
• /
• v.35 no.7
• /
• pp.2081-2085
• /
• 2014

Second-order rate constants ($k_N$) have been measured spectrophotometrically for the reactions of phenyl 2- pyridyl carbonate (6) with a series of cyclic secondary amines in MeCN at $25.0{\pm}0.1^{\circ}C$. The Br${\o}$nsted-type plot for the reaction of 6 is linear with ${\beta}_{nuc}$ = 0.54, which is typical for reactions reported previously to proceed through a concerted mechanism. Substrate 6 is over $10^3$ times more reactive than 2-pyridyl benzoate (5), although the reactions of 6 and 5 proceed through the same mechanism. A combination of steric hindrance, inductive effect and resonance contribution is responsible for the kinetic results. The reactions of 6 and 5 proceed through a cyclic transition state (TS) in which H-bonding interactions increase the nucleofugality of the leaving group (i.e., 2-pyridiniumoxide). The enhanced nucleofugality forces the reactions of 6 and 5 to proceed through a concerted mechanism. In contrast, the corresponding reaction of 4-nitrophenyl 2-pyridyl carbonate (7) proceeds through a stepwise mechanism with quantitative liberation of 4-nitrophenoxide ion as the leaving group, indicating that replacement of the 4-nitrophenoxy group in 7 by the PhO group in 6 changes the reaction mechanism (i.e., from a stepwise mechanism to a concerted pathway) as well as the leaving group (i.e., from 4-nitrophenoxide to 2-pyridiniumoxide). The strong electron-withdrawing ability of the 4-nitrophenoxy group in 7 inhibits formation of a H-bonded cyclic TS. The presence or absence of a H-bonded cyclic TS governs the reaction mechanism (i.e., a concerted or stepwise mechanism) as well as the leaving group (i.e., 2-pyridiniumoxide or 4-nitrophenoxide).

• Transactions on Electrical and Electronic Materials
• /
• v.12 no.5
• /
• pp.209-212
• /
• 2011

Hafnium nitride (HfN) thin films were deposited onto a silicon substrate by inductive coupled nitrogen plasma-assisted radio frequency magnetron sputtering. The films were prepared without intentional substrate heating and a substrate negative bias voltage ($-V_b$) was varied from -50 to -150 V to accelerate the effects of nitrogen ions ($N^+$) on the substrate. X-ray diffractometer patterns showed that the structure of the films was strongly affected by the negative substrate bias voltage, and thin film crystallization in the HfN (100) plane was observed under deposition conditions of -100 $V_b$ (bias voltage). Atomic force microscopy results showed that surface roughness also varied significantly with substrate bias voltage. Films deposited under conditions of -150 $V_b$ (bias voltage) exhibited higher hardness than other films.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.19 no.8
• /
• pp.73-80
• /
• 2020

The 3D printing of electronics has been a major application topics in additive manufacturing technology for a decade. In this paper, wireless power transfer (WPT) technology for 3D electronics is studied to supply electric power to its inner circuit. The principle of WPT is that electric power is induced at the recipient antenna coil under an alternating magnetic field. Importantly, the efficiency of WPT does rely on the design of the antenna coil shape. In 3D printed electronics, a flat antenna that can be placed on the printed plane within a layer of a 3D printed part is used, but provided a different antenna response compared to that of a conventional PCB antenna for NFC. This paper investigates the WPT response characteristics of a WPT antenna for 3D printed electronics associated with changes in its design elements. The effects of changing the antenna curvature and the gap between the wires were analyzed through experimental tests.

• Korean Journal of Materials Research
• /
• v.17 no.11
• /
• pp.618-621
• /
• 2007

Chromium nitride (CrN) films were deposited on silicon substrate by RF magnetron sputtering assisted by inductive coupled nitrogen plasma without intentional substrate heating. Films were deposited with different levels of bombarding energy by nitrogen ions $(N^+)$ to investigate the influence of substrate bias voltage $(V_b)$ on the growth of CrN thin films. XRD spectra showed that the crystallographic structure of CrN films was strongly affected by substrate bias voltage. Scanning electron microscopy (SEM) and atomic force microscopy (AFM) results showed that surface roughness and grain size of the CrN films varied significantly with bias voltage. For - 80 $V_b$ depositions, the CrN films showed bigger grain sizes than those of other bias voltage conditions. The lowest surface roughness of 0.15 nm was obtained from the CrN films deposited at .130 $V_b$.