• 한국정밀공학회지
• /
• 제18권3호
• /
• pp.189-194
• /
• 2001

This paper presents a mew design of an inductive position sensing system with high sensitivity. The designed system consists of the driving coils, position-detecting coils, and closed loop formed magnetic blocks. To obtain high sensitivity we design a symmetric and closed loop type measuring system with small air-gaps. The elements that affect the system characteristics are turn ratio, excitation frequency, air-gap size, capacitance effect, and load resistance. By experimental investigation, the influences of these elements are examined and the system parameters are selected. The sensitivity of the newly designed system is greater than 2800mV/(V mm) and the linearity error is below${\pm}0.01%; in; the; range; of; {\pm}200{\mu}m$.

• 한국과학교육학회지
• /
• 제12권1호
• /
• pp.35-46
• /
• 1992

The purpose of this study was to investigate the most effective teaching model in the study of boiling point elevation. The teaching models were classified into three group-deductive, inductive and analogical teaching models. Learning materials, based on three teaching models respectively, were applied to 11th grade students, and the effect of teaching models were investigated and analyzed. The average achievement score(4.24) of the group treated with the analogical teaching model was higher than those(3.06 respectively) of each group treated with inductive or deductive teaching model(p<0.001). Most students answered that the analogical teaching model was helpful and interesting one for the comprehension of scientific concept.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2003년도 추계학술대회 논문집 전력기술부문
• /
• pp.71-74
• /
• 2003

Fall-of-potential method is used usually to measure the ground impedance of large scale grounding system exactly. Because the interlinked magnetic flux between closed loops to inject test current and to measure potential rise is existed in E-P-C straight line arrangement, mutual(or inductive) coupling influences greatly on the measurement correctness. Measurement errors produced from inductive coupling could be reduced by the arrangement methods of auxiliary electrodes. Right angle or P-E-C order arrangement methods were effective to reduce the inductive coupling and the decrease degree of measurement error was analysed as quantitative through an experiment.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2007년도 제38회 하계학술대회
• /
• pp.1259-1260
• /
• 2007

In this paper, the inductive power collector using electromagnetic induction for vehicle such as the electric railway vehicle system is suggested and some ideas for power collector design to improve the power transfer performance are presented. The inductive power of secondary part is related to amount of linked flux to secondary part by the length of air-gap, which is expected by such a system parameter as mutual inductance. This paper will study for the transfer characteristic of power from input to output and equation including mutual inductance. And also, effect of leakage inductance variation of inductive power collector according to structure of winding was considered.

• Bulletin of the Korean Chemical Society
• /
• 제16권7호
• /
• pp.604-609
• /
• 1995

The relative dissociation constants of 4-substituted bicyclo[2,2,2]octane-1-carboxylic acids, 4-substituted quinuclidines, and 3-and 4-substituted pyridines were collected from a number of sources. In order to understand the actual substituent effects with a combination of inductive effect (σI) and resonance effect (σR) components. The DSP correlation has been employed statistically for each of the p-and m-series. The inductive effect from the m-position was 1.2 times more effective than that from the p-position and the requirement of σR+ for the best-fit led to the conclusion that pyridine system belongs to the σ+-class reactivity. Also compared with results from Yukawa-Tsuno's LArSR treatment and relevant treatment.

• 한국통신학회논문지
• /
• 제34권7B호
• /
• pp.734-743
• /
• 2009

본 논문은 정부의 방통융합 공공서비스 플랫폼 구축사업의 경제적 파급효과 분석을 목적으로 한다. 경제적 파급효과 분석을 위하여 방통융합 산업 분류체계를 재분류한 후 한국은행에서 발행하는 2003년 산업연관표를 RAS 기법을 이용하여 2009년 산업연관표를 재작성하였다. 그리고, 방통융합 공공서비스 플랫폼 구축에 따른 경제적 파급 효과를분석하였다. 연구결과 방통융합 공공서비스 플랫폼 구축사업의 경제적 파급효과로 나타나는 총생산유발효괴는 2009-2014년까지 약 3조 3,251 억원, 부가가치 유발효과는 2조 9,760억원, 고용유발효과는 약 13,806명의 고용창출이 나타나는 것으로 추정되었다. 방통융합 공공서비스 플랫폼 구축사업은 향후 국민의 생활개선 향상에 크게 기여할 것으로 기대되며, 본 연구는 사업을 추진하기 위한 기초자료로서 가치가 있을 것이다.

• 한국산학기술학회논문지
• /
• 제14권10호
• /
• pp.5148-5155
• /
• 2013

전기철도와 인접하여 병행 설치되어 있는 전기통신선에는 전자유도현상에 의한 유도전압이 발생하여 통신장애 및 안전사고가 발생할 수 있다. 이와 같은 유도장해를 경감시키고 통신신뢰성을 확보하기 위하여, 차폐케이블의 적용과 함께 최근 추진되고 있는 복선전철화에 따른 영향을 검토할 필요가 있다. 본 논문에서는 AT급전방식 전기철도에서 인근 통신선에 유기되는 유도전압에 영향을 미치는 각종 인수 및 산출식을 검토하고, 유도전압 발생 예측치를 시뮬레이션을 통하여 정량적으로 분석하였다. 시뮬레이션 결과, 복선철도에서는 단선철도에 비해 통신선 유도잡음 전압이 18[%] 정도 감소하여 타궤조 효과가 영향을 미치는 것으로 나타났다. 또한, 복선철도를 기준으로, 50% 차폐 통신케이블에서는 유도잡음전압이 1/8로 감소하였으며, 15% 차폐통신케이블에서는 1/15로 감소함에 따라 차폐효과가 크고 유도잡음전압 영향을 최소화할 수 있는 것으로 나타났다.

• 전기학회논문지
• /
• 제58권8호
• /
• pp.1526-1531
• /
• 2009

In this paper, for the first time a new type of narrow-range angle sensor based on inductive effect is introduced and studied. A prototype steering angle sensor is also designed and fabricated to compare the characteristics of the four methods from the viewpoints of sensitivity, linearity and resolution, angle range of the sensor output. This sensor is designed to be sensitive to very small resolution in angle with detected range is scaled down to about 12bit. An intensive investigation has been carried out to study the behaviors of the sensor and optimize its performance by signal compensation. These behaviors are discussed and explained using an analytical and experimental testings. Moreover, Application possibility of the sensor are proposed and a demo device based on the sensor is presented.

• 전자공학회논문지A
• /
• 제32A권6호
• /
• pp.1-9
• /
• 1995

The structures of inductive irises are used commonly in waveguide filter, especially at highter frequencyies, due to low loss and high temperature stability. However, the iris thickness can not be neglected, as it could be at the lower frequencies. Approximate models assuming zero thickness fail to predict the exact behavior of the filter. And current thickness correction is introduced which is valid in the case of thick irises only. Account of the effect of round is normally not taken. So the necessity of finding a relation for the two factors-iris thickness and round-arises in the design of waveguide filters. This paper describes a mutual relation that considers the combined effect of finite thickness and round from the start. In order to test the validity of the changed relation, weveral examples are given. And the measured response of each case is then compared with the predicted reponse. And it is shown that the radius is of perceptible influence on the transmission coefficient through a thick iris.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 1999년도 추계종합학술대회 논문집
• /
• pp.891-894
• /
• 1999

ICP reactor produces high-density and high-uniformity plasma in large area, are has excellent characteristic of direction in the case of etching. Until now, many algorithms used one mesh method. These algorithms are not appropriate for sub 0.1 ${\mu}{\textrm}{m}$ device technologies which should deal with each ion. These algorithms could not present exactly straggle and interaction between projectile ions and could not consider reflection effects due to interactions among next projectile ions, reflected ions and sputtering ions, simultaneously. And difficult consider am-bipolar drift effect.