• Smart Structures and Systems
• /
• v.18 no.2
• /
• pp.335-354
• /
• 2016

This contribution presents an extended one-dimensional theory for piezoelectric beam-type structures with non-ideal electrodes. For these types of electrodes the equipotential area condition is not satisfied. The main motivation of our research is originated from passive vibration control: when an elastic structure is covered by several piezoelectric patches that are linked via resistances and inductances, vibrational energy is efficiently dissipated if the electric network is properly designed. Assuming infinitely small piezoelectric patches that are connected by an infinite number of electrical, in particular resistive and inductive elements, one obtains the Telegrapher's equation for the voltage across the piezoelectric transducer. Embedding this outcome into the framework of Bernoulli-Euler, the final equations are coupled to the wave equations for the longitudinal motion of a bar and to the partial differential equations for the lateral motion of the beam. We present results for the wave propagation of a longitudinal bar for several types of electrode properties. The frequency spectra are computed (phase angle, wave number, wave speed), which point out the effect of resistive and inductive electrodes on wave characteristics. Our results show that electrical damping due to the resistivity of the electrodes is different from internal (=strain velocity dependent) or external (=velocity dependent) mechanical damping. Finally, results are presented, when the structure is excited by a harmonic single force, yielding that resistive-inductive electrodes are suitable candidates for passive vibration control that might be of great interest for practical applications in the future.

• Progress in Superconductivity and Cryogenics
• /
• v.16 no.2
• /
• pp.59-63
• /
• 2014

HTS power cable bypass the fault current through the former to protect superconducting tapes. On the other hand, the fault current limiting (FCL) power cable can be considered to mitigate the fault current using its increased inductance and resistance. Using the increased resistance of the cable is similar to the conventional resistive fault current limiter. In case of HTS power cable, the magnetic field of HTS power cable is mostly shielded by the induced current on the shield layer during normal operation. However, quench occurs at the shield layer and its current is kept below its critical current at the fault condition. Consequently, the magnetic field starts to spread out and it generates additional inductive impedance of the cable. The inductive impedance can be enhanced more by installing materials of high magnetic susceptibility around the HTS power cable. It is a concept of SFCL power cable. In this paper, a sample SFCL power cable is suggested and experimental results are presented to investigate the effect of iron cover on the impedance generation. The tests results are analyzed to verify the generation of the inductive and resistive impedance. The analysis results suggest the possible applications of the SFCL power cable to reduce the fault current in a real grid.

• KEPCO Journal on Electric Power and Energy
• /
• v.1 no.1
• /
• pp.85-91
• /
• 2015

We investigated the structure of inductive coupler and its magnetic coupling to increase the transmission coefficient for power line communication. A Rogowski coil, which is an air-cored inductive coupler, and a magnetic cored coupler were fabricated to analyze the transmission coefficient for different coupler parameters. This paper proposes the impedance matching method using lumped elements and an impedance transformer to increase the transmission coefficient. In the experiment, the transmission coefficient of the proposed system was increased in both narrowband and broadband cases, and a trade-off between the transmission coefficient and the bandwidth was shown. This method will be useful for the further study of impedance matching with the load variation.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2000.11a
• /
• pp.405-408
• /
• 2000

We designed and fabricated VCO using inductive reactance variation at 2GHz. A varactor diode is one of the main devices in VCO, which varies capacitance depending on reverse voltage. In this paper, a varactor diode is not used as a variable capacitive reactance device but as an inductive device. The circuit design and simulation have been carried out using HP-MDS. The fabricated VCO is measured using the HP 8532B spectrum analyzer and the HP 4352B VCO/PLL analyzer. The experimental result shows the phase noise -110dBc/Hz at a 100kHz offset frequency, the control voltage sensitivity of 23MHz/V and a -3.5dBm output power with a D.C. current consumption of 5.9mA. The simulation and measurements show exact agreement except with regard to the oscillation frequency. The measured oscillation frequency is lower than the simulation result because there is some parasitic inductance in the PCB layout.

• Journal of Elementary Mathematics Education in Korea
• /
• v.15 no.3
• /
• pp.641-654
• /
• 2011

In order to grow students' rational and creative problem-solving ability which is one of the primary goals in mathematics education. students' proper understanding of mathematical concepts, principles, and rules must be backed up as its foundational basis. For the relevant teaching strategies. National Mathematics Curriculum advises that students should be allowed to discover and justify the concepts, principles, and rules by themselves not only through the concrete hands-on activities but also through inquiry-based activities based on the learning topics experienced from the diverse phenomena in their surroundings. Hereby, this paper, firstly, looks into both the meaning and the inductive reasoning process of mathematical principles and rules, secondly, suggest "learning through discovery teaching method" for the proper teaching of the mathematical principles and rules recommended by the National Curriculum, and, thirdly, examines the possible discovery-led teaching strategies using inductive methods with the related matters to be attended to.

• Journal of Applied Biological Chemistry
• /
• v.53 no.1
• /
• pp.31-36
• /
• 2010

We analyzed antioxidant and quinone reductase (QR) inductive activities of various organs of pepper for utilizing by-product of them. Peppers were separated into fruits, roots, stems, and leaves and extracted with methanol for the analysis. As a result, pepper leaves showed higher phenol content than other organs. Using the DPPH assay, there was not considerably different activity depending on pepper organs, but pepper leaves showed significantly higher antioxidant activity using the ABTS assay. In FTC and TBA assay, stems and leaves showed significantly higher lipidperoxidation inhibitory activity. In QR inductive assay, pepper tissues showed different QR inductive activity: leaves>roots>>stems>fruits. In addition, pepper leaves showed highest antiproliferation activity on hepa1c1c7 among pepper tissues in $50-200\;{\mu}g/mL$. These results indicate that pepper leaves have high potential to be a good functional food material due to high QR inductive and antioxidant activities.

• Journal of KIISE:Software and Applications
• /
• v.37 no.9
• /
• pp.659-668
• /
• 2010

Collaborative filtering systems grasp behaviors for a new user and need new information for the user in order to recommend interesting items to the user. For the purpose of acquiring the information the collaborative filtering systems learn behaviors for users based on the previous data and can obtain new information from the results. In this paper, we propose an inductive inference method to obtain new information for users and rank items by using the new information in the proposed method. The proposed method clusters users into groups by learning users through NMF among inductive machine learning methods and selects the group features from the groups by using chi-square. Then, the method classifies a new user into a group by using the bayesian probability model as one of inductive inference methods based on the rating values for the new user and the features of groups. Finally, the method decides the ranks of items by applying the Rocchio algorithm to items with the missing values.

• Journal of the Korean Magnetics Society
• /
• v.25 no.1
• /
• pp.22-26
• /
• 2015

In this paper, a magneto-inductive wave generated in a chain of LC resonators fabricated with Ni-Zn ferrite cores and chip capacitors is presented. RF signal propagates to neighbor resonator one by one as a consequence of the magnetical coupling between two resonators in the device. The magnetical coupling is due to the mutual inductances along the chain of resonators. So, the signal amplitude (${\approx}$ coupling intensity) is dependent of the mutual inductance which can be adjusted by applied magnetic field. In order to demonstrate the device, some experiments have been carried out systemically. The transmission characteristics of a magneto-inductive wave could be controlled by applied external magnetic field. The device composed of 5 resonators; the center frequencies were estimated to be 32 MHz and 38 MHz with the external magnetic flux density of 75 Oe and 222 Oe, respectively. We expect that the reported results could open a promising way to a high variety of applications in one- and two-dimensional functional devices, such as transducers, delay lines, power dividers and couplers.

• Journal of The Korean Association of Information Education
• /
• v.22 no.5
• /
• pp.575-583
• /
• 2018

This study approached EPL learning with deductive teaching and learning methods and inductive teaching and learning methods which are grammar teaching and learning methods. In the entry site, lectures provided for elementary school students in grades 5 to 6 were set as deductive learning courses. Based on this, inductive learning process was developed and each learning process was composed of 12 periods. After conducting the research, EPL utilization evaluation, learning satisfaction and immersion test were conducted between the two groups. It was difficult to obtain statistically meaningful results between the two groups. However, in the three tests, the mean value of groups using inductive teaching and learning methods was high. If we construct a long-term learning process and conduct research, we think that statistically meaningful results are produced between the two groups.

• Journal of the Korea Convergence Society
• /
• v.6 no.2
• /
• pp.57-64
• /
• 2015

Inductive Power Transfer (IPT) systems have successfully been developed and used to replace traditional conductive power transfer systems where physical connection is either inconvenient or impossible, such as biomedical implants, undersea vehicles, and contactless battery chargers of robots, for providing power to movable or detachable loads. Inductive Coupling uses magnetic fields to transfer power. There is a primary coil, which generates a magnetic field. Then there is another secondary coil which is composed of a capacitor and a coil, the capacitor creates a circuit with the primary and secondary coils. This paper discusses design method and several implementation alternatives for wireless energy transmission systems. It presents realization examples for these alternatives. Wireless energy transmission is investigated in numerous convergence applications due to its simplicity and advantages.