• Proceedings of the KIEE Conference
• /
• 2003.04a
• /
• pp.170-172
• /
• 2003

Among low power servo applications, classical DC motors are very popular because they are reasonably cheap and easy to control. The main disadvantage is the mechanical collector which has only a limited life period. Also, brush sparking can destroy the rotor coil, generate EMC problems. So permanent magnet brushless do motors and drives are being used increasingly in a wide range of applications. This has been made possible with the advantages of high performance permanent magnets with high coercively and residual magnetic, which make it possible for the PM to have superior power density, torque to inertia ratio and efficiency, when compared to an induction or conventional dc machine. This paper presents the design of a PM brushless dc motor drive simplistically operates as a classical dc motor. The BLDC motor drive system for this paper composes to the power integrated circuits, the one chip device. And several simple semiconductors add to drive system for a motor drive system simplistically operates as a conventional dc motor. Test results confirmed the feasibility of the proposed motor drive system design.

• Proceedings of the KWS Conference
• /
• 2002.10a
• /
• pp.776-780
• /
• 2002

This paper describes the concept and the characteristics of hyper interfacial bonding developed as a new concept joining process for UFG (ultra-fine grained) steel. Hyper interfacial bonding process is characterized by instantaneous surface melting bonding which involves a series of steps, namely, surface heating by high frequency induction, the rapid removing of heating coil and joining by pressing specimens. UFG steels used in this study have the average grain size of 1.25 ${\mu}{\textrm}{m}$. The surface of specimen can be rapidly heated up and melted within 0.2s. Temperature gradient near heated surface is relatively steep, and peak temperature drastically fell down to about 1100K at the depth of 2~3mm away from the heated surface of specimen. Bainite is observed near bond interface, and also M-A (martensite-austenite) islands are observed in HAZ. Grain size increases with increasing heating power, however, the grain size in bonded zone can be restrained under 11 ${\mu}{\textrm}{m}$. Hardened zone is limited to near bond interface, and the maximum hardness is Hv350~Hv390.

• Journal of the Korean Chemical Society
• /
• v.30 no.3
• /
• pp.327-332
• /
• 1986

Spatial (radial and height) distribution of electron number density is measured for an inductively coupled plasma under five operating conditions: (1) no carrier gas, (2) carrier gas without aerosel, (3) carrier gas with aerosol, (4) carrier gas with desolvated aerosol, and (5) carrier gas with aerosol and excess lithium. A complete RF power mapping of electron density is obtained. The plasma electrons for a typical analytical torch are observed to be hollow at the radial center in the region close to the induction coil, but diffuse rapidly toward the center in the higher region of the plasma. The presence of excess Li makes no significant change in the electron density profiles. The increases in the RF power levels increase the values of electron density uniformly across the radial coordinate.

• The KSFM Journal of Fluid Machinery
• /
• v.3 no.4 s.9
• /
• pp.22-29
• /
• 2000

Numerical analysis using three dimensional finite volume method for the discretization, adaptive grid method for the numerical accuracy, multiple rotating frame method for the rotating body and the standard $k-{\epsilon}$ model for the turbulent flow was performed to understand the heat transfer phenomena and to improve the efficiency of the scroll compressor. The temperature measurement was carried out under ARI condition. It was found that the fluid temperature in the compressor was predicted accurately while the temperature of the motor coil showed large discrepancy between the calculation and experiment due to the large anisotropy of the conductivity and non homogeneity. We found that the efficiency of the compressor depends on the inlet temperature of the compressing part and the flow pattern around the inlet region of the compressing part influences the inlet temperature due to high surface temperature of the main frame. The efficiency of the compressor using Coanda effect is higher than the previous one because the smooth suction at the inlet region of the compressing part leads to low heat transfer to the refrigerant of the compressor.

• International Journal of Oral Biology
• /
• v.41 no.4
• /
• pp.231-236
• /
• 2016

Inhibition of Rho-associated coiled coil-containing kinase (ROCK) has been reported to promote differentiation of neuronal cells. Here, we examined the effect of Y-27632, a ROCK inhibitor, on the outgrowth of neurites in PC12 cells. Y-27632 caused a rapid induction of neurite outgrowth in PC12 cells in a time-dependent manner. The neurite outgrowth, triggered by Y-27632, was accompanied by Rac1 activation, and was attenuated by Rac1 inhibitor NSC23766, in a concentration-dependent manner. Y-27632 also induced an increase in the production of reactive oxygen species (ROS). Pretreatment with N-acetylcysteine, an ROS scavenger, inhibited the ROS generation and neurite outgrowth in response to Y-27632. These results indicate that the activation of Rac1 and the generation of ROS contribute to the neurite outgrowth triggered by Y-27632 in PC12 cells.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.11 no.5
• /
• pp.35-40
• /
• 2011

In this paper, an auto recharging system for a mobile robot based on the wireless power transmission and visual information is proposed. The existing recharging systems for mobile robot use mechanical contact while wireless power transmission transfers energy by electromagnetic induction method without contacts. For efficiency of charging, alignment of coils is important. In order to solve this problem, with the visual image, ellipticity of coil circle is recognized to control the pose of mobile robot.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.22 no.3
• /
• pp.166-170
• /
• 2014

In this paper, we investigate the electric and magnetic properties of the engine oil, and estimate its changing time in transport truck. The four diesel trucks are selected, and the capacitance and inductance are investigated with parallel capacitor and induction coil, respectively. The measured capacitance gradually increases up to 10,000~14,000 km due to the activation of antioxidant, and then decreasing phenomena happen. The inductance decreases and the saturation began in 10,000~14,000 km range. Although the behavior of inductance is different from that of capacitance, but changing points are similar. From those results, we can estimate the changing time of engine oil is around 10,000~14,000 km and the inductance can be used for monitoring of engine oil in transport trucks.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2018.06a
• /
• pp.118-118
• /
• 2018

Indium tim Oxide (ITO) 의 idium 공급 제한과 그 고유한 특성상 유연기판에 적용에는 한계가 있어 대체 물질 개발이 활발히 이뤄지는 가운데, 금속나노와이어는 그 중에서도 각광받는 물질 중 하나이다. 금속나노와이어 네트워크는 높은 전기 전도성, 투명성과 같은 많은 이점을 가지며 유연기판에 다양한 방법으로 손쉽게 제조할 수 있다. 이러한 장점에도 불구하고 금속나노와이어는 자체의 고유한 표면 거칠기 및 접착 문제 등으로 인해 그 한계를 가지며, 또한 polynivnylpyrolidone (PVP)의 코팅이 불가피하기 때문에 나노와이어 간의 높은 접촉저항 및 junction 문제는 해결과제로 남아있다. 본 연구에서는 이러한 금속나노와이어의 문제를 극복하기 위해 유도전류에 의해 와전류를 발생시켜 나노와이어 junction 부분에서 짧은 시간동안 국소적으로 용접시킬 수 있는 induction coil system을 구축하였다. 금속나노와이어 전극 기판의 투명도를 유지하며 기판과 나노와이어에 영향을 미치지 않고 electric field를 통해 nano-welding 하는 효과를 기대하였다. 그 결과, 실험에 사용한 은나노와이어와 구리나노와이어는 초기 투과도를 유지하면서 면저항을 각각 약 68 %, 50% 감소하는 효과를 보였다. 또한 표면 이미지 측정을 하여 표면 거칠기도 감소하였음을 확인하였으며, welding됨에 따라 내구성 향상에도 영향을 미쳤음을 bending test 와 adhesion test를 통해 그 특성이 향상되었음을 확인하였다. 본 연구에서 실시한 와전류를 이용한 나노용접 방법은 건식방법이며 열이 직접적으로 발생하지 않기 때문에 모든 종류의 금속 나노와이어에 적용될 것으로 기대하며, 짧은 시간과 저렴한 비용으로 넓은 영역에 적용 가능하다는 장점을 가져 다방면에 활용 가능할 것으로 기대한다.

• Archives of Pharmacal Research
• /
• v.18 no.5
• /
• pp.351-355
• /
• 1995

The fecal tryptophanase activities were $0.267{\pm}0.10$ for rats and $0.185{\pm}0.01{\;}{\mu}mole/min/g$ wet feces for humans. The activities of indole pyruvate degradation to indole, indole pyruvate lyase, of these feces were $0.051{\pm}0.02$ and $0.046{\pm}0.01{\;}{\mu}mole/min/g$ wet feces, respectively. The optimal pH values of tryptophanase and indole pyruvate lyase were 5.5-7.5 and 5.5-6.5, respectively. When the intestinal flora or E. coli HGU-3 was cultured in GAM broth having six different pH values (5 to 10), the activities of tryptophanase and indole pyruvate IYilse in the medium adjusted at pH 6 were dramatically induced by elevating the pH to 9. However, when intestinal microflora were inoculated in the medium containing lactulose, the pro¬ductions of these enzymes were dramatically inhibited and the pH of the medium was lower than that of the control.

• Proceedings of the Korean Powder Metallurgy Institute Conference
• /
• 2006.09b
• /
• pp.804-805
• /
• 2006

Electric scroll-compressor drives are commonly used for e.g. home appliance cooling units. The recent development of hybrid cars with internal combustion engine in combination with electrical propulsion requires new solutions to be able to cool the passenger compartment of cars at stand-still. Both application areas demand efficient motor drives to reach good economy and efficient use of limited battery power as well as competitive volume/weight for a given output. The BLDC motor is a controllable and efficient solution. A major part of the motor is the soft-magnetic core. The powder based $Somaloy^{(R)}$ material shows high resistivity and induction as the result of engineered iron particles with in-organic coating. The unique features of compacted $Somaloy^{(R)}$ components can be utilized to enhance the shape and total volume of the BLDC motor with at least maintained efficiency compared to the use of traditional laminated steel sheet cores. A careful design of the $Somaloy^{(R)}$ components can also simplify assembly and positively influence the coil configuration. This study shows a comparison between a typical laminated BLDC motor and a redesigned, $Somaloy^{(R)}$ based version adapted for a scroll-compressor application.