• Journal of Technologic Dentistry
• /
• v.21 no.1
• /
• pp.27-41
• /
• 1999

The Ag-Pd-Cu alloys containing a small amount of Au is commonly used for dental purposes, because this alloy cheaper than Au-base alloys for clinical use. However, the most important characteristic of this alloy is age-hardenability, which is not exhibited by other Ag-base dental alloys. The specimens used were Ag-30Pd-10Cu ternary alloy and Au addition alloy. These alloys were melted and casted by induction electric furnace and centrifugal casting machine in Ar atmosphere. These specimens were solution treated for 2hr at $800^{\circ}C$ and were then quenched into iced water, and aged at 350-$550^{\circ}C$ Age-hardening characteristic of the small Au-containing Ag-Pd-Cu dental alloys were investigated by means of hardness testing, X-ray diffraction and electron microscope observations, electrical resistance, differential scanning calorimetric, energy dispersed spectra and electron probe microanalysis. Principal results are as follows ; Maximum hardening occured in two co-phases of ${\alpha}_2$ + PdCu In stage II, decomposition of the $\alpha$ solid solution to a PdCu ordered phase($L1_o$ type) and an Ag-rich ${\alpha}_2$ phase occurred and a discontinuous precipitation occurred at the grain boundary. From the electron microscope study, it was concluded that the cause of age-hardening in this alloy is the precipitation of the PdCu redered phase, which has AuCu I type face-centered tetragonal structure. Precipitation procedure was ${\alpha}{\to}{\alpha}_1+PdCu{\to}{\alpha}_2+PdCu$ at Pd/Cu = 3 Pd element of Ag-Pd-Cu alloy is more effective dental alloy on anti-corrosion and is suitable to isothermal ageing at $450^{\circ}C$.

• Journal of Korea Foundry Society
• /
• v.20 no.2
• /
• pp.104-109
• /
• 2000

Three different white cast irons alloyed with Cr, V, Mo and W were prepared in order to study their abrasion wear behavior in as-cast and heat-treated conditions. The specimens were produced using a 15㎏-capacity high frequency induction furnace. Melts were super-heated to $1600^{\circ}C$, and poured at $1550^{\circ}C$ into Y-block pepset molds. Three combinations of the alloying elements were selected so as to obtain the different types of carbides : 3%C-10%Cr-5%Mo-5%W(alloy No. 1: $M_7C_3$ and $M_6C$), 3%C -10%V-5%Mo-5%W(alloy No. 2: MC and $M_2C$) and 3%C-17%Cr-3%V(alloy No. 3: $M_7C_3$ only). A scratching type abrasion test was carried out in the states of as-cast(AS), homogenizing(AH), air-hardening(AHF) and tempering(AHFT). First of all, the as-cast specimens were homogenized at $950^{\circ}C$ for 5h under the vacuum atmosphere. Then, they were austenitized at $1050^{\circ}C$ for 2h and followed by air-hardening in air. The air-hardened specimens were tempered at $300^{\circ}C$ for 3h. 1 ㎏ load was applied in order to contact the specimen with abrading wheel which was wound by 120 mesh SiC paper. The wear loss of the test piece(dimension: $50{\times}50{\times}5$ mm) was measured after one cycle of wear test and this procedure was repeated up to 8 cycles. In all the specimens, the abrasion wear loss was found to decrease in the order of AH, AS, AHFT and AHF states. Abrasion wear loss was lowest in the alloy No.2 and highest in the alloy No.1 except for the as-cast and homogenized condition in which the alloy No.3 showed the highest abrasion wear loss. The lowest abrasion wear loss of the alloy No.2 could be attributed to the fact that it contained primary and eutectic MC carbides, and eutectic $M_2C$ carbide with extremely high hardness. The matrix of each specimen was fully pearlitic in the as-cast state but it was transformed to martensite, tempered martensite and austenite depending upon the type of heat-treatment. From these results, it becomes clear that MC carbide is a significant phase to improve the abrasion wear resistance.

• Journal of Welding and Joining
• /
• v.35 no.1
• /
• pp.9-15
• /
• 2017

IMicrostructure evolution and tensile property in the weld heat-affected zone (HAZ) of austenitic Fe-30Mn-9Al-0.9C lightweight steels were investigated. Five alloys with different V and Nb content were prepared by vacuum induction melting and hot rolling process. The HAZ samples were simulated by a Gleeble simulator with welding condition of 300kJ/cm heat input and HAZ peak temperatures of $1150^{\circ}C$ and $1250^{\circ}C$. Microstructures of base steels and HAZ samples were observed by scanning electron microscopy (SEM) and transmission electron microscopy (TEM), and their mechanical properties were evaluated by tensile tests. The addition of V and Nb formed fine V and/or Nb-rich carbides, and these carbides increased tensile and yield strength of base steels by grain refinement and precipitation hardening. During thermal cycle for HAZ simulation, the grain growth occurred and the ordered carbide (${\kappa}-carbide$) formed in the HAZs. The yield strength of HAZ samples (HAZ 1) simulated in $1150^{\circ}C$ peak temperature was higher as compared to the base steel due to the formation of ${\kappa}-carbide$, while the yield strength of the HAZ samples (HAZ 2) simulated in $1250^{\circ}C$ decreased as compared to HAZ 1 due to the excessive grain growth.

• Journal of Plant Biotechnology
• /
• v.34 no.3
• /
• pp.189-195
• /
• 2007

Helicteres isora is medicinally important plant effective against asthma, diabetes, hypolipidemia, HIV, besides a good source of diosgenin. Seed dormancy and low rate of natural fruit production make this plant a perfect candidate for developing an in vitro method useful for its clonal propagation and further biotechnological developments. This is the first report on in vitro production of this plant. Nodal explants obtained from aseptically germinated seedlings were cultured on MS medium (Murashige and Skoog 1962) fortified with indole-3-acetic acid (IAA) ($0.57-22.83\;{\mu}M$), indole-3-butyric acid (IBA) ($0.41-16.58\;{\mu}M$), 6-benzylaminopurine (BA) ($0.44-17.75\;{\mu}M$) and kinetin (Kin) ($0.46-13.94\;{\mu}M$) either singly or in combinations of IAA + BA, IAA + Kin and BA + Kin. Combinations of cytokinins (BA and Kin) were most suitable for multiple shoot induction and $13.94\;{\mu}M\;Kin\;+\;13.31\;{\mu}M\;BA$ was optimum (79% frequency) associated with high number of microshoots (7.1 shoots per explant) after 20 days of culture. Maximum shoot elongation and proliferation (10 shoots per explant with 4.8 cm average height) was achieved on MS media containing $2.32\;{\mu}M\;Kin\;+\;2.22\;{\mu}M\;BA\;+\;2.85\;{\mu}M\;IAA$. High rooting frequency (70%) was achieved on MS medium (1/2 basal strength) fortified with $4.14\;{\mu}M$ IBA, while activated charcoal showed inhibitory effects on rooting. Hardening was done with 76% survival rate and these plants were growing without any visual defects and morphologically mimicking the naturally growing plants.

• Korean Journal of Metals and Materials
• /
• v.49 no.1
• /
• pp.85-91
• /
• 2011

Alnico magnets can be used as magnetic bearings for the precise electric power measuring instruments such as watt-hour meters because they have high remanence ($B_r$), relatively high maximum energy product ($(BH)_{max}$), and excellent temperature stability. In this study, Alnico composite magnets were fabricated by appropriately mixing alnico alloy powders with epoxy resin and binder. The Alnico powders mixed with epoxy resin and a hardening agent with a mixing ratio of 96:4 were pressed and then cured to be a toroid-type ring magnet with an outer diameter (${\Phi}_{out}$) of 15 mm, an inner diameter (${\Phi}_{in}$) of 6.5 mm and a thickness (t) of 2.5 mm, respectively. The magnetic properties of the Alnico ring magnets were varied with the mixing ratio of Alnico powders that possess different average particle sizes. The Alnico ring magnet prepared by mixing 5 wt% of $50{\mu}m$ (small size) powder, 15~20 wt% of $150{\mu}m$ (medium size) powder, and 75~80 wt% of $300{\mu}m$ (large size) powder showed the best magnetic properties (remanent induction, coercive force, maximum energy product, and surface flux density). In addition, measurements of temperature and moisture characteristics for the Alnico ring magnets showed that the surface flux densities of the N and S poles decreased little and the repulsive distance between the magnets decreased as small as 0.05 mm after 10 days.

• Journal of Microbiology and Biotechnology
• /
• v.32 no.2
• /
• pp.238-247
• /
• 2022

Since the skin covers most surfaces of the body, it is susceptible to damage, which can be fatal depending on the degree of injury to the skin because it defends against external attack and protects internal structures. Various types of artificial skin are being studied for transplantation to repair damaged skin, and recently, the production of replaceable skin using three-dimensional (3D) bioprinting technology has also been investigated. In this study, skin tissue was produced using a 3D bioprinter with human skin cell lines and cells extracted from mouse skin, and the printing conditions were optimized. Gelatin was used as a bioink, and fibrinogen and alginate were used for tissue hardening after printing. Printed skin tissue maintained a survival rate of 90% or more when cultured for 14 days. Culture conditions were established using 8 mM calcium chloride treatment and the skin tissue was exposed to air to optimize epidermal cell differentiation. The skin tissue was cultured for 14 days after differentiation induction by this optimized culture method, and immunofluorescent staining was performed using epidermal cell differentiation markers to investigate whether the epidermal cells had differentiated. After differentiation, loricrin, which is normally found in terminally differentiated epidermal cells, was observed in the cells at the tip of the epidermal layer, and cytokeratin 14 was expressed in the lower cells of the epidermis layer. Collectively, this study may provide optimized conditions for bioprinting and keratinization for three-dimensional skin production.

• Korean Journal of Animal Reproduction
• /
• v.14 no.1
• /
• pp.36-42
• /
• 1990

The effect of preincubation on in vitro maturation and fertility were investigated using preovulatory oocytes with and without cumulus cells obtained from superovulated ouot-bred ICR mice. Oocytes were recovered from fully grown folicle at 10 hr after hCG administration. A part of oocytes recovered were treated with the solution of 0.1% hyaluronidase to remove cumulus cells. Both intact and treated oocytes were then incubated for 0 to 6hr in mT6 medium containing 0.3% BSA. After incubation for various times, a part of oocytes were subjected to the investigation of nuclear maturation and the remaining oocytes were used fro the induction of in vitro fertilization by adding them into medium containing capacitated mice epididymal spermatozoa. Above all, the percentage of preovulatory oocytes at the stage of metaphase II after preincubation for 0, 2, 4 and 6hr was 15.8, 36.4, 47.5 and 66.7%, respectively, suggesting the in vitro maturation of oocytes during their incubation. On the other hand, fertilizatin rate of oocytes preincubated for 0, 2, 4 and 6hr with and without cumulus cells were 41.0, 58.7, 68.7 and 75.6%, and 50.0, 45.1, 37.8 and 39.2%, respectively. No significant differences in fertilization rate between preovulatory oocytes preincubated for 6hr with cumulus cells and naturally ovulated were observed. These results suggest that cumulus cells take very important role in maturtion of oocytes in vitro. The precentage of preovulatory oocytes developed to 2-cell stage in vitro fertilization following preincubation for 0 to 6hr with and without cumulus cells ranged from 48.5 to 82.4% and 36.9 to 56.1%, respectively. Also, the rates of oocytes developed to blastocyst in vitro fertilization after preincubation for 0 to 6hr with and without cumulus cells were 28.1, 39.3, 42.5 and 44.0% and 12.5, 32.6, 24.4 and 15.5%, respectively. From these results, it could be said that fertility of preovulatory oocytes with cumulus cells could be improved to the level of that of naturally ovulated oocytes by adquate preincubation in vitro. Cumulus cells may, therefore, affect in vitro maturation, fertilization and following development of oocytes by influencing zona hardening.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.34 no.1
• /
• pp.85-90
• /
• 2010

Friction welding is a common practice to join axially symmetrical parts for automobile industry applications. The shaft for automobile reverse idle gear is generally produced by forging steel, SF 45. This method is not so good because of high cost of material and production. In this study, in order to investigate the possibility of application of SM 45C to SF 45 dissimilar friction welding, the dissimilar friction welded joints were performed using 20 mm diameter solid bar in forging steel(SF 45) to carbon steel(SM 45C). The optimal friction welding parameters were selected to ensure reliable quality welds on the basis of visual examination, tensile test, micro-Virkers hardness surveys of the bond of area and optical microstructure investigations for welded joint parts. Finally, post weld heat treatment(PWHT) of the high-frequency induction hardening was performed for the friction welded specimens under the optimal welding conditions. And then, the mechanical properties were compared for as-welded and PWHT in SM 45C to SF 45.

• Korean Journal of Plant Resources
• /
• v.24 no.2
• /
• pp.168-173
• /
• 2011

This study was carried out to optimize the embryogenic callus induction and plant regeneration from mature seeds of Sorghum bicolor. The effect of growth regulators was investigated on formation of embryogenic callus. The highest frequency of embryogenic callus was observed when the mature seeds were cultured on B5 medium supplemented with 2 mg/L 2,4-Dichlorophenoxyacetic acid (2,4-D). The highest frequency of plant regeneration from embryogenic callus was observed on MS medium with 0.5 $mg\;l^{-1}$ 6-benzyl amino purine (BAP) and 0.25 $mg\;l^{-1}$ indole-3-butyric acid (IBA) to optimize the shoot regeneration. High concentration of BAP (1 $mg\;l^{-1}$) supplemented with IBA (0.25 $mg\;l^{-1}$) was effective combination for shoot multiplication. MS medium supplemented with 1 $mg\;l^{-1}$ IBA was found to be the most effective for inducing roots. Normal rooted plantlets were transferred to the greenhouse for hardening with over 90% survival rate. Hence, this reproducible protocol could be useful for mass propagation and genetic transformation of S. bicolor.