Browse > Article
http://dx.doi.org/10.3795/KSME-A.2010.34.1.85

Mechanical Properties of Friction Welded SM 45C-SF 45 Joints for Automobile Reverse Idle Gear Shaft Applications  

Kong, Yu-Sik (School of Mechanical Engineering, Pukyong National University)
Yun, Seong-Pil (School of Mechanical Engineering, Pukyong National University)
Kim, Seon-Jin (School of Mechanical Engineering, Pukyong National University)
Publication Information
Transactions of the Korean Society of Mechanical Engineers A / v.34, no.1, 2010 , pp. 85-90 More about this Journal
Abstract
Friction welding is a common practice to join axially symmetrical parts for automobile industry applications. The shaft for automobile reverse idle gear is generally produced by forging steel, SF 45. This method is not so good because of high cost of material and production. In this study, in order to investigate the possibility of application of SM 45C to SF 45 dissimilar friction welding, the dissimilar friction welded joints were performed using 20 mm diameter solid bar in forging steel(SF 45) to carbon steel(SM 45C). The optimal friction welding parameters were selected to ensure reliable quality welds on the basis of visual examination, tensile test, micro-Virkers hardness surveys of the bond of area and optical microstructure investigations for welded joint parts. Finally, post weld heat treatment(PWHT) of the high-frequency induction hardening was performed for the friction welded specimens under the optimal welding conditions. And then, the mechanical properties were compared for as-welded and PWHT in SM 45C to SF 45.
Keywords
Friction Welding; As-Welded; Post-Weld Heat Treatment; Micro-Virkers Hardness; Heat Affected Zone;
Citations & Related Records
Times Cited By KSCI : 4  (Citation Analysis)
Times Cited By SCOPUS : 0
연도 인용수 순위
1 Chung, N. Y. and Park, C. H., 2006, "Strength Evaluation of Friction Welded SUH35/SUH3 Considering Stress Singularity," Trans. of KSAE, Vol. 14, No. 4, pp. 59-67   과학기술학회마을
2 Cho, H. S. and Suh, S. J., 1997, "Friction Welding of Inconel 713C and SCM 440," Journal of KWS, Vol. 15, No. 6, pp. 78-84   과학기술학회마을
3 KWS, 1998, "Welding Joining," KWS, pp. 663-664
4 Chung, N. Y. and Park, C. H., 2006, "Establishment of Fracture Criterion on Friction Welded Dissimilar Materials," Trans. of KSAE, Vol. 14, No. 5, pp. 164-171   과학기술학회마을
5 Suh, C. M., Suh, D. Y. and Lee, D. J., 1995, "A Study on Fatigue Strength in the Friction Welded Joints of HSS-Co to SM 55C Catbon Steel(1)," Trans. of the KSME(A), Vol. 19, No. 4, pp. 918-928   과학기술학회마을
6 Suh, C. M., Suh, D. Y. and Lee, D. J., 1995, "A Study on Fatigue Strength in the Friction Welded Joints of HSS-Co to SM 55C Catbon Steel(2)," Trans. of the KSME(A), Vol. 19, No. 4, pp. 929-940   과학기술학회마을
7 Kang, K. W., Shim, H. J., Lee, B. J., Jhang, K. Y. and Kim, J. K., 2006, "An Analysis for Failure Mechanisms and Strength Evaluation on Brazed Joint," Trans. of the KSME(A), Vol. 30, No. 10, pp. 1298-1304   과학기술학회마을   DOI   ScienceOn
8 ASTM, 2005, "ASTM E384-05 Standard Test Method for Microindentation Hardness of Materials," ASTM Standard
9 Kong, Y. S. and Kim, S. J., 2006, "Mechanical Properties of Dissimilar Friction Welded Steel Bars in Relation to Post Weld Heat Treatment," Trans. of the KSME(A), Vol. 30, No. 4, pp. 402-408   과학기술학회마을   DOI   ScienceOn
10 Kong, Y. S., Kwon, S. W. and Kim, S. J., 2006, "Optimization of Dissimilar Friction Welding and Creep Rupture Tests for Nuclear Reactor Component Materials," Key Engineering Materials, Vol. 306-308, pp. 1019-1024   DOI