• Microbiology and Biotechnology Letters
• /
• v.24 no.4
• /
• pp.385-392
• /
• 1996

Bacillus stearotheymophilus, a potent xylanolytic bacterium isolated from soil, was tested for the strain's strategies of pentose utilization and the evidence of substrate preferences. The strain metabolized glucose, xylose, ribose, maltose, cellobiose, sucrose, arabinose and xylitol. The efficacy of the sugars as a carbon and energy source in this strain was of the order named above. The organism, however, could not grow on glycerol as a sole growth substrate. During cultivation on a mixture of glucose and xylose or arabinose, the major hydrolytic products of xylan, B. stearothermophilus displayed classical diauxic growth in which glucose was utilized during the first phase. On the other hand, the pentose utilization was prevented immediately upon addition of glucose. Cellobiose was preferred over xylose or arabinose. In contrast, maltose and pentose were co-utilized, and also no preference on between xylose and arabinose. Enzymatic studies indicated that B. stearothermophilus possessed constitutive hexokinase, a key enzyme of the glucose metabolic system. While, the production of $^{D}$-xylose isomerase, $^{D}$-xylulokinase and $^{D}$-arabinose isomerase essential for pentose phosphate pathway were induced by xylose, xylan, and xylitol but repressed by glucose. Taken together, the results suggested that the sequential utilization of B. stearothermophilus would be mediated by catabolite regulatory mechanisms such as catabolite inhibition or inducer exclusion.

• BMB Reports
• /
• v.38 no.6
• /
• pp.695-702
• /
• 2005

The groESL bicistronic operon of a restricted facultative methylotrophic bacterium Methylovorus sp. strain SS1 DSM 11726 was cloned and characterized. It was found to consist of two ORFs encoding proteins with molecular masses of 11,395 and 57,396 daltons, which showed a high degree of homology to other bacterial GroES and GroEL proteins. The genes were clustered in the transcription order groES-groEL. Northern blot analyses suggested that the groESL operon is transcribed as a bicistronic 2.2-kb mRNA, the steady-state level of which was markedly increased by temperature elevation. Primer extension analysis demonstrated one potential transcription start site preceding the groESL operon, which is located 100bp upstream of the groES start codon. The transcription start site was preceded by a putative promoter region highly homologous to the consensus sequences of Escherichia coli ${\sigma}^{32}$-type heat shock promoter, which functioned under both normal and heat shock conditions in E. coli. Heat shock mRNA was maximally produced by Methylovorus sp. strain SS1 approximately 10min after increasing the temperature from 30 to $42^{\circ}C$. The groESL operon was also induced by hydrogen peroxide or salt shock.

• Earthquakes and Structures
• /
• v.11 no.4
• /
• pp.649-664
• /
• 2016

A seismic damaged bridge may be hit again by a strong aftershock or another earthquake in a short interval before the repair work has been done. However, discussions about the impact of the unrepaired damages on the residual earthquake resistance of a steel bridge are very scarce at present. In this paper, nonlinear time-history analysis of a steel arch bridge was performed using multi-scale hybrid model. Two strong historical records of main shock-aftershock sequences were taken as the input ground motions during the dynamic analysis. The strain response, local deformation and the accumulation of plasticity of the bridge with and without unrepaired seismic damage were compared. Moreover, the effect of earthquake sequence on crack initiation caused by low-cycle fatigue of the steel bridge was investigated. The results show that seismic damage has little impact on the overall structural displacement response during the aftershock. The residual local deformation, strain response and the cumulative equivalent plastic strain are affected to some extent by the unrepaired damage. Low-cycle fatigue of the steel arch bridge is not induced by the earthquake sequences. Damage indexes of low-cycle fatigue predicted based on different theories are not exactly the same.

• Microbiology and Biotechnology Letters
• /
• v.18 no.6
• /
• pp.553-559
• /
• 1990

A strain degrading phthalate ester was isolated from a sludge of Taegu area and identified as a strain of Klebsiella. The optimum culture conditions for the protocatechuate dioxygenase production were also investigated. This strain produced the enzyme in question under the shaking cultivation at $30^{\circ}C$for the 48 hrs in the medium containing 0.1% protocatechuate as the sole carbon source, 0.1% ammonium sulfate and 0.1% yeast extract as the nitrogen source and mineral salt mixture of magnesium sulfate, sodium chloride, calcium chloride, ferric chloride, manganese sulfate, zinc sulfate and cupric sulfate. This enzyme was intracellularl j localized and probably linked to cell membrane, and induced by protocatechuate.

• Journal of Microbiology and Biotechnology
• /
• v.16 no.11
• /
• pp.1740-1746
• /
• 2006

Enrichment techniques led to the isolation of a Pseudomonas sp. strain P2 from municipal waste-contaminated soil sample, which could utilize different isomers of a commercial mixture of 4-nonylphenol when grown in the presence of phenol. The isolate was identified as Pseudomonas sp., based on the morphological, nutritional, and biochemical characteristics and 16S rDNA sequence analysis. The ${\beta}$-ketoadipate pathway was found to be involved in the degradation of phenol by Pseudomonas sp. strain P2. Gas chromatography-mass spectrometric analysis of the culture media indicated degradation of various major isomers of 4-nonylphenol in the range of 29-50%. However, the selected ion monitoring mode of analysis of biodegraded products of 4-nonylphenol indicated the absence of any aromatic compounds other than those of the isomers of 4-nonylphenol. Moreover, Pseudomonas sp. strain P2 was incapable of utilizing various alkanes individually as sole carbon source, whereas the degradation of 4-nonylphenol was observed only when the test organism was induced with phenol, suggesting that the degradation of 4-nonylphenol was possibly initiated from the phenolic moiety of the molecule, but not from the alkyl side-chain.

• Journal of Microbiology and Biotechnology
• /
• v.17 no.10
• /
• pp.1638-1644
• /
• 2007

The effect of carbon sources on tacrolimus production by a mutant strain of Streptomyces clavuligerus CKD 1119, an isolate from soil, was examined. Among the carbohydrates and oils tested in this work, a mixed carbon source of soluble starch and com oil was the best. An analysis of the culture kinetics also showed that, in contrast to the carbohydrates, the com oil was consumed later in the antibiotic production phase, implying that the oil substrate was the principal carbon source for the biosynthesis of tacrolimus, and this was directly proven by experiments using $^{14}C$-glucose and $^{14}C$-oleate substrates. Furthermore, com oil induced the formation of lipase by the mutant strain, whereas the addition of glucose significantly repressed lipase activity. The lipase activity exhibited by the FK-506-overproducing mutants was also observed to be directly proportional to their tacrolimus yield, indicating that a high lipase activity is itself a crucial factor for tacrolimus production. A feasibility study with a 200-1 pilot-scale fermentor and the best strain (Tc-XII-15322) identified in this work revealed a high volumetric and specific productivity of about 495 mg/l and 0.34 mg/mg dry mycelium, respectively.

• Nuclear Engineering and Technology
• /
• v.52 no.4
• /
• pp.802-810
• /
• 2020

Three-dimensional finite element simulations are implemented for the in-pile thermo-mechanical behavior in U-Mo/Al monolithic fuel plates with different thermal creep rates of cladding involved. The numerical results indicate that the thickness increment of fuel foil rises with the thermal creep coefficient of cladding. The maximum Mises stress of cladding is reduced by ~85% from 344 MPa on the 98.0^th day when the creep coefficient of cladding increases from 0.01 to 10.0, due to its equivalent thermal creep strain enlarged by 3.5 times. When the thermal creep coefficient of Aluminum cladding increases from 0 to 1.0, the maximum mesoscale stress of fuel foil varies slightly. At the same time, the peak mesoscale normal stress of fuel foil can reach 51 MPa on the 98.0^th day for the thermal creep coefficient of 10, which increases by 60.3% of that with the thermal creep un-occurred in the cladding. The maximum through-thickness creep strain components of fuel foil differ slightly for different thermal creep coefficients of cladding. The dangerous region of fuel foil becomes much closer to the heavily irradiated side when the creep coefficient of cladding becomes 10.0. The creep performance of Aluminum cladding should be optimized for the integrity of monolithic fuel plates.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2004.03b
• /
• pp.730-737
• /
• 2004

In this paper, in order to examine cyclic hehavior characteristics and safety of underground flexible pipes for electric cables subject to cyclic vehicle load, FEM analysis and cyclic soil box test were carried out. As results of the test, it was revealed that the vertical displacement of the test was larger than that of FEM analysis because thermal effect arising from power cables made reduction of rigidity of the pipe so that large deformation of the pipe induced by the heat occured. Moreover, it was shown that the final vertical displacement under about 0.4 million times of the cyclic load test was not satisfied with elastic allowable displacement of the pipe, and long term stability of the pipe was not stable since behavior characteristics of the pipe exists plastic strain range pasted clastic strain range.

• Korean Journal of Environmental Agriculture
• /
• v.33 no.2
• /
• pp.129-133
• /
• 2014

BACKGROUND: This study was performed for selecting yeast mutants with a high tolerance for targeted metals, and determining whether yeasts strains tolerant to multiple heavy metals could be induced by sequential adaptations. METHODS AND RESULTS: A mutant yeast strain tolerant to the heavy metals cadmium (Cd), copper (Cu), nickel (Ni), and zinc (Zn) was selected by sequential elevated exposures to each metal with intermittent mutant isolation steps. A Cd-tolerant mutant was isolated by growing yeast cells in media containing $CdCl_2$ concentrations that were gradually increased to 1 mM. Then the Cd-tolerant mutant was gradually exposed to increasing levels of $CuCl_2$ in growth media until a concentration of 7 mM was reached, thus generating a strain tolerant to both Cd and Cu. In the subsequent steps, this mutant was exposed to $NiCl_2$ (up to 8 mM), and a resultant isolate was further exposed to $ZnCl_2$ (up to 60 mM), allowing the derivation of a yeast mutant that was simultaneously tolerant to Cd, Cu, Ni, and Zn. CONCLUSION: This method of inducing tolerance to multiple targeted heavy metals in yeast will be useful in the bioremediation of heavy metals.

• IMMUNE NETWORK
• /
• v.10 no.6
• /
• pp.230-238
• /
• 2010

Background: The MK1 strain, a novel bacterial isolate from soft-rotten tissue of the Neungee mushroom, produces copious amounts of exopolysaccharide (EPS) in a dextrose minimal medium. This study examined the molecular characteristics and immunomodulatory activity of MK1 EPS. Methods: The EPS in the culture supernatant was purified by cold ethanol precipitation, and characterized by SDS- PAGE/silver staining and Bio-HPLC. The immunomodulatory activities of the EPS were examined using the mouse monocytic cell line, RAW 264.7 cells. Results: The molecular weights of the purified EPS were rather heterogeneous, ranging from 10.6 to 55 kDa. The EPS was composed of glucose, rhamnose, mannose, galactose, and glucosamine at an approximate molar ratio of 1.00 : 0.8 : 0.71 : 0.29 : 0.21. EPS activated the RAW cells to produce cytokines, such as TNF-${\alpha}$ and IL-$1{\beta}$, and nitric oxide (NO). EPS also induced the expression of co-stimulatory molecules, such as B7-1, B7-2 and ICAM-1, and increased the phagocytic activity. The macrophage-activating activity of EPS was not due to endotoxin contamination because the treatment of EPS with polymyin B did not reduce the macrophage-activating activity. Conclusion: The EPS produced from the MK1 strain exerts macrophage-activating activity.