• 설비공학논문집
• /
• 제27권8호
• /
• pp.395-401
• /
• 2015

Recently, many research studies have been carried out on the efficiency of light-shelf daylighting systems, especially comparing performance improvements and the limitations of reflective surfaces and their lighting performance. In this study, a crystal face reflective surface is proposed. The objective of the study is to evaluate the lighting performance of a crystal face light-shelf through a performance study. The performance study was carried out in a full scale test-bed in order to calculate the light distribution and energy consumption utilizing the standard indoor illumination as an index. The conclusions of the performance study are as follows. 1) The optimal angle of incidence for daylighting for both the operable flat type light-shelf and the crystal face light-shelf are taken in the natural environment on the dates of the winter and summer solstices, as well as the autumn and spring equinoxes. 2) The application and installation of the crystal face light-shelf can produce a 29.9%~34.3% increase of light distribution within the indoor space. However, the increase of light distribution can also lead to a decrease in the uniformity ratio, a design challenge that should be considered when applying a crystal face light-shelf. 3) It is possible to achieve a 7.98%~13.3% greater reduction in energy consumption when applying a crystal face light-shelf than when applying a flat type light-shelf. The increase in the number of crystal faces should concur with the analysis of the energy reduction. A limitation of the study is that only one predetermined pattern was performance tested for a crystal face light-shelf. In order to carry out further research on crystal face light-shelves, additional performance studies are needed based on alternative patterns and designs.

• 한국산림과학회지
• /
• 제85권2호
• /
• pp.309-315
• /
• 1996

원목재배용(原木裁培用) 표고우량균주(優良菌株)를 육성(育成)하기 위해 균주수집(菌株蒐集)에 의한 선발육종(選拔育種)과 교배계(交配系)를 이용한 교잡육종(交雜育種)을 실시한 결과는 다음과 같다. 1. 국내외(國內外)에서 수집(蒐集)한 35종의 균주에 대한 원목재배를 실시하여 1세대(世代)(5년간(年間)) 버섯수확량(收穫量)이 신갈나무(Quercus mongolica) $1m^3$당(當) 139kg을 보이는 FRI 177 등 3개의 고온성균주(高溫性菌株)와 120kg을 나타낸 FRI 188 등 2개의 중온성균주(中溫性菌株) 및 96kg의 FRI 187 등 저온성(低溫性) 7개 균주를 우량품종(優良品種)으로 선발하였다. 2. Di-mon교배법(交配法)을 이용하여 제조한 교잡균주중(交雜菌株中) 실내검정(室內檢定)을 통하여 독립계통(獨立系統)으로 확인된 12균주(菌株)에 대하여 원목재배(原木栽培)를 실시하여 1세대(世代) 버섯수확량이 원목(原木) $1m^3$당(當) 108kg에 달하는 고온성균주(高溫性菌株) FRI 182와 103kg을 보이는 저온성균주(低溫性菌株) FRI 184 등 2개를 우량종균(優良種菌)으로 선발하였다. 3. 고온성, 중온성 및 저온성 등 온도형(溫度型)에 따른 생산성(生産性)의 유의차(有意差)는 없었으나, 계통간(系統間)의 생산성차이(生産性差異)는 인정(認定)되었다. 한편 원목재배(原木栽培)와 톱밥재배간(栽培間)의 생산성에는 어떤 상관관계(相關關係)도 보이지 않았다.

• 제어로봇시스템학회논문지
• /
• 제20권5호
• /
• pp.486-494
• /
• 2014

Intelligent homes consist of ubiquitous sensors, home networks, and a context-aware computing system. These homes are expected to offer many services such as intelligent air-conditioning, lighting control, health monitoring, and home security. In order to realize these services, many researchers have worked on various research topics including smart sensors with low power consumption, home network protocols, resident and location detection, context-awareness, and scenario and service control. This paper presents the real-time metabolic rate estimation method that is based on measured heart rate for human adaptive appliance (air-conditioner, lighting etc.). This estimation results can provide valuable information to control smart appliances so that they can adjust themselves according to the status of residents. The heart rate based method has been experimentally compared with the location-based method on a test bed.

• 한국실내디자인학회논문집
• /
• 제19권2호
• /
• pp.252-262
• /
• 2010

With the introduction of the ubiquitous technology, the housing culture centers have demonstrated future housing image or technology. But Ubiquitous Home Services in the future housing were more focused on implementation of environment for the future than exhibition that consumers can experience. The purpose of this study was to identify ubiquitous home services which were realized in domestic future housing and to compare those with results of previous researches on demand for u-services. For this study, field study was conducted with 3 domestic future housings and 14 previous studies on demand of u-services were analyzed by the standard of residents demand. The results of the study showed that u-services for housework and leisure life more than those for security and health, were applied in the future housing. However, residents prefered u-services for security and control of indoor environment to those for housework and leisure life. As a result, it was found thatu-services which residents needed mainly were discordant with those that were displayed frequently in future housing. Also developing u-services reflected the needs of residents, a test bed has to be established in the future housing and then pre-evaluaiton can be conducted.

• 로봇학회논문지
• /
• 제6권1호
• /
• pp.1-9
• /
• 2011

An increasing number of researches and developments for personal or professional service robots are attracting a lot of attention and interest industrially and academically during the past decade. Furthermore, the development of intelligent robots is intensively fostered as strategic industry. Until now, most of practical and commercial service robots are worked by remotely operated controller. The most important technical issue of remote control is a wireless communication, especially in the indoor and unstructured environments where communication infrastructures might be destroyed by various disasters. Therefore we propose a multi-robot following navigation method for securing the valid communication distance extension of the remote control based on WPAN(Wireless Personal Area Networks). The concept and implementation of following navigation are introduced and the performance verification is performed through real navigation experiments in real or test-bed environments.

• 한국정보통신학회논문지
• /
• 제16권7호
• /
• pp.1559-1566
• /
• 2012

본 논문에서는 실거주 환경과 같이 구축된 테스트베드에 온도 센서를 설치하여 최적의 온도 측정 위치를 설정하는 방법을 제안한다. 테스트베드를 CFD(Computational Fluid Dynamics) 방법으로 온도 변화를 시뮬레이션하고, 온도 변화와 기류 변화를 확인하여 최적 온도 측정 위치를 선정한다. 디자인빌더 소프트웨어를 이용하여 테스트베드를 3차원 모델링을 하고 CFD를 실행하였다. 최적위치는 바닥에서 높이 1.5m이고, 온도 변화가 적은 곳을 선택하였다. 실제 공간에 30개의 온습도센서를 설치하여 실험을 진행하였고 온도변화 결과를 확인하였다.

• 한국통신학회논문지
• /
• 제40권2호
• /
• pp.385-389
• /
• 2015

배경 잡음이 강한 실내 환경에서 가시광통신을 이용하기 위해서는 저주파대역 잡음을 피해야 한다. 또한 통신을 하면서도 LED 조명의 장점을 유지하기 위해서는 조명등의 깜박임이 없어야 하며, 밝기를 조절할 수 있어야 한다. 본 논문에서는 위 기능을 수행하기 위해 신호 스펙트럼을 고주파 영역으로 이동하여 전송을 수행하였다. 특히 송수신을 모두 디지털회로만으로 구현 가능하도록 Subpulse-VPPM 변조방법을 제안하고, 전송 성능 측정을 위해 테스트베드를 제작하였다.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2011년도 춘계학술대회 초록집
• /
• pp.108-108
• /
• 2011

공동주택에서 2025년 정부가 추진하고 있는 Zero Energy 건축물 구현과 친환경에 대한 탄소배출 저감 문제로 재생에너지 생산시스템의 추가 적용은 반드시 필요하다. 따라서 공동주택 적용 및 활용성을 높일 수 있는 BIPV시스템 개발을 통하여 설치면적 확보와 세대 활용성을 높일 수 있도록 하는 것이 필요하다. 특히 거실 창호의 경우 주방향이 남향, 남동 또는 남서향으로 배치되어 태양광을 적용하기에 적합한 특성을 가지고 있다. 그러나 창호는 건물외피의 역할과 재실자가 조망과 정보취득을 얻을 수 있는 중요한 통로가 되기 때문에 단열 문제나 시야 차폐의 문제는 발생하지는 않도록 하는 것이 필요하다. 본 연구에서는 a-si타입 모듈 2개를 10% 투과율로 Bsck Coating 색상을 달리한 모듈과 c-si BIPV 모듈을 커튼월 창호시스템으로 개발, 일반 2중 창호시스템과 비교 평가를 위해 실제 Test bed 건물에 시공하여 시환경 및 실내 창측면 온도변화 측정 분석을 진행하였다. 현재 국내외 출시되고 있는 a-si see through 모듈은 10~30%의 투과율로 창 마감재로 대체가 가능하나 건축 환경(시환경,열환경)에 대한 분석은 전무한 상태이다. 본 연구에서는 시환경과 창유리면의 열 부하, 자외선, 적외선 차폐 및 가시광선의 투과율에 대한 평가와 Back Coating에 따른 색온도 평가를 통해서 a-si BIPV의 공동주택 세대 발코니 창호 적합성에 대한 검토를 진행하였다. 연구결과는 아래와 같다. ${\bullet}$ 실내조도는 청천공 정오기준 가시성 확보 모듈의 경우 2,300 ~ 3,500lx를 나타내고 있어 대비 현상이나 창측의 급격한 조도 변화가 적은 시환경 구축이 가능 ${\bullet}$ 12시경 휘도는 창측면, 실내 벽체, 코너 바닥면을 대상으로 a-si BIPV 모듈을 적용한 경우 휘도비가 12:1로 KS나 IESNA의 광원과 근접면의 비 20:1 범위에 모두 존재, 적합한 것으로 분석되었으나 c-si의 경우는 그림자로 인한 대비 현상이 발생, 작업 시환경 문제 발생. ${\bullet}$ 이중시스템 창호와 비교하여 단열 성능 떨어짐. 발전시간대 창유리 면 온도 상승 으로 하절기 냉방부하 증가. ${\bullet}$ 자외선은 100% 가까이 차단, 적외선은 13~42%만 투과되고 가시광선은 13% 투과율을 나타내어 일반 창에 칼라 코팅을 적용하는 것과 유사한 경향을 나타냄.

• KIEAE Journal
• /
• 제14권6호
• /
• pp.5-13
• /
• 2014

Various studies on lighting energy savings are conducted, given that lighting energy consumption accounts 23.5% of building energy consumption. Especially, external type light shelf's efficiency is acknowledged; however, its application is limited in Korea, where high rise building ratio is high, due to high wind pressure. This study delves into natural lighting system to cope with wind pressure, and proposes the punching plate-installed light shelf. This study actually draws lighting energy output, according to whether the punching plate is applied through the test-bed, and verifies the effectiveness of the punching plate-installed light shelf. The conclusion is presented below: First) The result of performance evaluation of light shelf with the punching plate in winter solstice showed that the awning area decreased as the opening ratio increased so that the indoor distributed illumination tended to increase, and $-40^{\circ}$ which was advantageous for awning was determined as the proper angle. Second) The light shelf with the punching plate in spring/autumn equinox shows improved lighting according to the angle, and the appropriate angle of light shelf with the punching plate has increased to $15^{\circ}$ and $20^{\circ}$ according to the opening ratio in comparison to $5^{\circ}C$ which is the appropriate angle of light shelf with no punching plate due to the reflection area reduced by the reflecting plate with holes. Third) The result of performance evaluation of light shelf with the punching plate in summer solstice showed that the lighting performance tended to decrease as the opening ratio increased. 4) The light shelf with the punching plate incurs a 50% energy loss in comparison to the light shelf with no punching plate. However, its effectiveness has been proven in the aspects that it can bring a 50% energy saving in comparison to the case with no installation of light shelf and that it can be designed in response to wind pressure on the high floors.

• 한국대기환경학회지
• /
• 제24권5호
• /
• pp.538-550
• /
• 2008

Radon is an invisible, odorless, and radioactive gas. It is formed by the disintegration of radium, which is a decay product of uranium. Some amounts of radon gas and its products are present ubiquitously in the soil, water, and air. Particularly high radon levels occur in regions of high uranium content. Although radon is permeable into indoor environment not only through geological features (bed rock and permeability) but also through the construction materials and underground water, the radiation from the geological features is generally main exposure factor. So there can be a problem in a certain space such as the underground and/or relatively poor ventilation condition. In this study, a GIS technique was used in order to investigate spatial distribution of radon measured from sub- way stations of 1 thru 8 in Seoul, Korea in 1991, 1998, 2001, and 2006. Spatial analysis was applied to reproduce the radon distribution. We utilized spatial analysis techniques such as inverse distance weighted averaging (IDW) and kriging techniques which are widely used to relate between different spatial points. To validate the results from the analyses, the jackknife technique for an uncertainty test was performed. When the number of measuring sites was less than 100 and also when the number of omitted sites increased, the kriging technique was better than IDW. On the other hand, when the number of sites was over 100, IDW technique was better than kriging technique. Thus the selection of analytical tool was affected sensitives by the analysis based on the number of measuring sites.