• Journal of Broadcast Engineering
• /
• v.18 no.4
• /
• pp.515-524
• /
• 2013

In this paper, we propose a novel face authentication method based on LBP matching of individual major blocks in mobile environment. In order to construct individual major blocks from photos, we find the blocks that have the highest similarity and use different numbers of blocks depending on the probability distribution by applying threshold. And, we use multi-radius LBP histograms in the determination of individual major blocks to improve performance of generic LBP histogram based approach. By using the multi-radius LBP histograms in face authentication, we can successfully reduce the false acceptance rate compare to the previous methods. Also, we can see that the proposed method shows low error rate about 7.72% compare to the pervious method in spite of use small number of blocks about 44.59% only.

• KIEAE Journal
• /
• v.5 no.3
• /
• pp.11-16
• /
• 2005

The recent trends of high-density and high-rise in apartment housing have caused the problems of decrease in ventilation rates and increase of indoor pollutant contaminants. SHS(Sick House Syndrome) has now become a major issue and threats the health of residents. To solve these indoor air problems, increase in ventilation rate is considered as one of the most efficient approach. Thus, the recent housing development is pursuing improvement in the site design and the layout of apartment building blocks to promote natural ventilation is now investigated as one of the fundamental solutions. This study was focused on the air flow characteristics of outdoor environment in an apartment complex to keep the pollutants out of the site. Age of air and pressure difference have been used as indices of the outdoor air quality. Four different types of apartment building layouts have been analyzed by CFD simulation. This study again selected a real apartment housing complex as a case study model. By analyzing the pressure differences between the front and rear of an apartment building block, the ventilation performance in each individual unit was evaluated, and its impact on ventilation performance is investigated by analyzing the stagnant air around the apartment building blocks. During this process, existing patterns of apartment housing layout have been evaluated, and the most appropriate site layout has been chosen to analyze the outdoor airflow patterns. Based on the analysis of airflow patterns of site layout, the possibilities of improving ventilation performance of an individual apartment housing is proposed.

• Journal of the Optical Society of Korea
• /
• v.17 no.5
• /
• pp.362-370
• /
• 2013

In this paper, we propose a novel optical implementation of a 3DES algorithm based on dual XOR logic operations for a cryptographic system. In the schematic architecture, the optical 3DES system consists of dual XOR logic operations, where XOR logic operation is implemented by using a free-space interconnected optical logic gate method. The main point in the proposed 3DES method is to make a higher secure cryptosystem, which is acquired by encrypting an individual private key separately, and this encrypted private key is used to decrypt the plain text from the cipher text. Schematically, the proposed optical configuration of this cryptosystem can be used for the decryption process as well. The major advantage of this optical method is that vast 2-D data can be processed in parallel very quickly regardless of data size. The proposed scheme can be applied to watermark authentication and can also be applied to the OTP encryption if every different private key is created and used for encryption only once. When a security key has data of $512{\times}256$ pixels in size, our proposed method performs 2,048 DES blocks or 1,024 3DES blocks cipher in this paper. Besides, because the key length is equal to $512{\times}256$ bits, $2^{512{\times}256}$ attempts are required to find the correct key. Numerical simulations show the results to be carried out encryption and decryption successfully with the proposed 3DES algorithm.

• Journal of Digital Convergence
• /
• v.4 no.2
• /
• pp.67-73
• /
• 2006

This paper is an analysis of the Category Individual Residence urban spatial structure along the National Route BO (Koushu-Kaido), one of the major roads in Japan, and the degree of differences between locations and its changes between the points of time. The analysis was based on the GIS technique. Whilst, previous studies were based on municipal boundaries or mesh units as sources of data, GIS allowed the use of variable geographical units, Roadside zone, Inner zone, North zone, South zone, Blocks. As an example to apply the technology of GIS, 1986's and 1991's building polygon data of the Urban Planning Bureau of Tokyo Metropolitan Government are used. The layers referred to the analyses is the building polygons with the amount of stories, building area, floor area and the material of the building. Two statistical analysis are executed; one is the test of the regional equality about the number of story of building, building area, floor area and fireproof building ratio.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2013.06a
• /
• pp.242-243
• /
• 2013

본 논문에서는 모바일 환경에서의 얼굴인증 성능 향상 방법을 제안한다. 제안했던 기존 방법에서는 다중 반경 LBP 히스토그램을 분석하고 임계값을 적용하여 개인별 주요 블록을 구성하였다. 이 때 임계값의 적용에 따라 인증 성능의 변화가 발생할 수 있고, 주요 블록에 동일한 가중치를 적용하기 때문에 블록의 분별력을 크게 고려하지 않았다. 제안하는 방법은 주요 블록에 가중치를 적용하는 방법으로 주요한 블록과 비교적 덜 중요한 블록의 분별력을 높여 개인인증의 성능을 향상시킨다. 실험 결과 제안하는 방법이 기존 방법들 과 비교하여 낮은 에러율을 보였다.

• 한국디지털정책학회:학술대회논문집
• /
• 2005.11a
• /
• pp.291-298
• /
• 2005

This paper is an analysis of the Category Individual Residence urban spatial structure along the National Route 20 (Koushu-Kaido), one of the major roads in Japan, and the degree of differences between locations and its changes between the points of time. The analysis was based on the GIS technique. Whilst, previous studies were based on municipal boundaries or mesh units as sources of data, GIS allowed the use of variable geographical units, Roadside zone, Inner zone, North zone, South zone, Blocks. As an example to apply the technology of GIS, 1986's sand 1991's building polygon data of the Urban Planning Bureau of Tokyo Metropolitan Government are used. The layers referred to the analyses is the building polygons with the amount of stories, building area, floor area and the material of the building. Two statistical analysis are executed; one is the test of the regional equality about the number of story of building, building area, floor area and fireproof building ratio.

• Nuclear Engineering and Technology
• /
• v.53 no.11
• /
• pp.3790-3797
• /
• 2021

Although the individual channel readout method can improve the performance of PET detectors with pixelated photo-sensors, such as silicon photomultiplier (SiPM), this method leads to a significant increase in the number of readout channels. In this study, we proposed a novel multiplexing method that could effectively reduce the number of readout channels to reduce system complexity and development cost. The proposed multiplexing circuit was designed to generate bipolar pulses with different zero-crossing points by adjusting the time constant of the high-pass filter connected to each channel of a pixelated photo-sensor. The channel position of the detected gamma-ray was identified by estimating the width between the rising edge and the zero-crossing point of the bipolar pulse. In order to evaluate the performance of the proposed multiplexing circuit, four detector blocks, each consisting of a 4 × 4 array of 3 mm × 3 mm × 20 mm LYSO and a 4 × 4 SiPM array, were constructed. The average energy resolution was 13.2 ± 1.1% for all 64 crystal pixels and each pixel position was accurately identified. A coincidence timing resolution was 580 ± 12 ps. The experimental results indicated that the novel multiplexing method proposed in this study is able to effectively reduce the number of readout channels while maintaining accurate position identification with good energy and timing performance. In addition, it could be useful for the development of PET systems consisting of a large number of pixelated detectors.

• Spatial Information Research
• /
• v.1 no.1
• /
• pp.39-53
• /
• 1993

A geographical information systems(GIS) was a useful aid in the assessment of urban nonpoint source pollution and the development of a pollution control strategy. The GIS was used for data integration and display, and to provide data for a nonpoint source model. An empirical nonpoint source loading model driven by land use was used to estimate pollutant loadings of priority pollutant. Pollutant loadings were estimated at fine spatial resolution and aggregated to storm sewer drainage basins(sewershedsl. Eleven sewersheds were generated from digital versions of sewer maps. The pollutant loadings of individual land use polygons, derived as the unit of analysis from street blocks, were aggregated to get total pollutant loading within each sewershed. Based on the model output, a critical sewershed was located. Pollutant loadings at major sewer junctions within the critical sewershed were estimated to develop a mi t igat ion strategy. Two approaches based on the installat ion of wet ponds were investigated -- a regional approach using one large wet pond at the major sewer outfall and a multi-site approach using a number of smaller sites for each major sewer junction. Cost analysis showed that the regional approach would be more cost effective, though it would provide less pollution control.

• Industry Promotion Research
• /
• v.8 no.4
• /
• pp.221-227
• /
• 2023

This study is a study to analyze Nativity's occupational aptitude by examining the functions and structures of the planets that make up the Nativity birth chart of Classic Astrology. If the occupation that appears in the birth chart is viewed as an individual's natural occupation, it is analyzed through the strength and weakness of the sign and planets, and the aspect (relationship with the planet). In Classic Astrology's nativity birth chart, there are three major planets when judging occupations: Venus (♀). Mars (♂). It was thought to be determined by Mercury (☿). However, in order to meet the diversity of jobs required in today's highly developed knowledge and information society, there are some shortcomings, so Saturn (♄), Jupiter (♃), Sun (☉), Moon (☽) was added to apply the aptitude for the job. Thus, the native's ASC vocational aptitude could be applied more diversely and broadly based on the relationship between planets and their aspects. As a result, Venus (♀. Venus) means enjoying artistic work that people think is beautiful and making it a pleasure in life, while Mars (♂) means work that requires physical strength and strength, such as working days. Mercury (☿) means using knowledge and brains, and the Sun (☉) plays a role in giving authority to jobs and talents. The Moon (☽) helps the native gain people's trust in his or her profession and talents, Jupiter (♃) helps the native to revive his or her profession and talents through faith, sincerity, fairness, and generosity, and Saturn (♄) can appear as an obstacle that blocks career and talent due to greed, sadness, poverty, etc. As a result of the study, it was found that the native's occupations vary depending on the strengths and weaknesses of the planets and their aspect relationships.

• The Journal of the Petrological Society of Korea
• /
• v.21 no.3
• /
• pp.335-365
• /
• 2012

Fission-track (FT) thermochronological records from SE Korean Cretaceous-Paleogene granitic plutons in different fault-bounded blocks reveal contrasting cooling and later thermal histories. Overall cooling patterns are represented by a monotonous (J-shaped) curve in most plutons except some Cretaceous granites retaining a complicated (N-shaped) path due to post-reset re-cooling. Discriminative cooling rates over different temperature ranges can be explained for individual plutons with respect to relative pluton sizes, differences in initial heat loss depending on country rocks, and the presence and proximity of later igneous activity. Even within a single batholith, cooling times for different isotherms were roughly contemporaneous with respect to positions. Insignificant deviations in cooling ages from two different plutons in succession across the Yangsan fault may suggest their contemporaneity before major horizontal fault movement. The extent of later thermal rise recorded locally along the Yangsan and Dongnae fault zones were reached the Apatite Partial Stability Zone ($70-125^{\circ}C$), but did not exceed $200^{\circ}C$. Thermal alteration from fractured zones in the Yangsan-Ulsan fault junction may suggest a thermal reset above $290^{\circ}C$ resulting a complete reset in FT sphene age (31 Ma), caused by a tectonic subsidence in Early Oligocene. A consistency in FT zircon/apatite ages (24 Ma) may imply a sudden rapid cooling over $200-105^{\circ}C$, plausibly related to the abrupt tectonic uplift of the Pohang-Gampo Block including the fault junction in Late Oligocene. A remarkable trend of lower cooling ages for $300-200-100^{\circ}C$ isotherms (i.e., 19% for FT sphene and K-Ar biotite; 20% for FT zircon; 27% for FT apatite) from the east of the Ulsan fault (Pohang-Gampo Block) comparing to the west of the fault may be attributed to retarded cooling times from the Paleogene granites and also reflected by their partially-reduced apatite ages due to later thermal effects.