• Journal of the korean academy of Pediatric Dentistry
• /
• v.26 no.4
• /
• pp.630-635
• /
• 1999

Transposition has been described as an interchange of position of permanent tooth and is a relatively rare dental anomaly. Transposition of teeth may occur both in the maxillary and mandibular arches. but it appears more often in the maxilla of individual teeth, the maxillary canine is the most often involved. A canine transposes most often with a first premolar and less frequently transposes with a lateral incisor. Incomplete transposition is a condition describing an interchange in the position of the crowns of two permanent teeth, while the root apices remain in their relative position. Complete transposition is a situation in which both the crowns and entire root structure are transposed. The etiologic factors of transposition are tooth buds interchange, retained deciduous canines, migration of the erupting canine, trauma to deciduous teeth etc. This report describes a case of a transposition between a maxillary left canine and a lateral incisor and impaction of a maxillary left central incisor due to trauma to deciduous dentition.

• The korean journal of orthodontics
• /
• v.46 no.5
• /
• pp.310-322
• /
• 2016

Objective: The aim of this study was to determine the optimal loading conditions for pure intrusion of the six maxillary anterior teeth with miniscrews according to alveolar bone loss. Methods: A three-dimensional finite element model was created for a segment of the six anterior teeth, and the positions of the miniscrews and hooks were varied after setting the alveolar bone loss to 0, 2, or 4 mm. Under 100 g of intrusive force, initial displacement of the individual teeth in three directions and the degree of labial tilting were measured. Results: The degree of labial tilting increased with reduced alveolar bone height under the same load. When a miniscrew was inserted between the two central incisors, the amounts of medial-lateral and anterior-posterior displacement of the central incisor were significantly greater than in the other conditions. When the miniscrews were inserted distally to the canines and an intrusion force was applied distal to the lateral incisors, the degree of labial tilting and the amounts of displacement of the six anterior teeth were the lowest, and the maximum von Mises stress was distributed evenly across all the teeth, regardless of the bone loss. Conclusions: Initial tooth displacement similar to pure intrusion of the six maxillary anterior teeth was induced when miniscrews were inserted distal to the maxillary canines and an intrusion force was applied distal to the lateral incisors. In this condition, the maximum von Mises stresses were relatively evenly distributed across all the teeth, regardless of the bone loss.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.14 no.1
• /
• pp.109-115
• /
• 2013

This study targeted 501 the elderly ages 65 or over in three places including the Senior Welfare Center and the college for seniors located in Daegu City and Gyeongsangbuk-do. The study results on the preference for oral health care management items across different ages showed that the age group of 65~69 fluoride application; the age group of 65~74 scaling and education of brushing; the age group of 70~74 denture cleaning and maintenance; the age group of 75 denture production. In the relationship between the self-perceived oral condition and the items of oral health care management, respondents who currently have a poor oral condition or have greater chewing trouble, or have higher dry mouth, preference the manufacturing of dentures in most cases. Respondents who have a lower number of teeth or wear dentures preference dentures cleansing and management in most cases. Respondents who have shaking teeth or have frequent tooth pain preference tooth extraction. Since the preference for oral health care management items may differ by their age or oral condition, oral health management customized to each individual should be applied.

• Restorative Dentistry and Endodontics
• /
• v.48 no.4
• /
• pp.33.1-33.12
• /
• 2023

Objectives: This study aimed to evaluate the bleaching efficacy and hydrogen peroxide permeability in the pulp chamber by the at-home bleaching gel in protocols applied on different dental surfaces. Materials and Methods: Forty premolars were randomly into 4 groups: control group no bleaching, only application on the buccal surface (OB), only application on the lingual surface (OL) and application in buccal and lingual surfaces, simultaneously (BL). At-home bleaching gel (White Class 7.5%) was used for the procedure. The bleaching efficacy was evaluated with a digital spectrophotometer (color change in CIELAB [ΔE_ab] and CIEDE 2000 [ΔE₀₀] systems and Whitening Index for Dentistry [ΔWI_D]). The hydrogen peroxide permeability in the pulp chamber (㎍/mL) was assessed using UV-Vis spectrophotometry and data were analyzed for a 1-way analysis of variance and Tukey's test (α = 0.05). Results: All groups submitted to bleaching procedure showed bleaching efficacy when measured with ΔE_ab and ΔE₀₀ (p > 0.05). Therefore, when analyzed by ΔWI_D, a higher bleaching efficacy were observed for the application on the groups OB and BL (p = 0.00003). Similar hydrogen peroxide permeability was found in the pulp chambers of the teeth undergoing different protocols (p > 0.05). Conclusions: The application of bleaching gel exclusively on the OB is sufficient to achieve bleaching efficacy, when compared to BL. Although the OL protocol demonstrated lower bleaching efficacy based on the ΔWI_D values, it may still be of interest and relevant in certain clinical scenarios based on individual needs, requiring clinical trials to better understand its specificities.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.23 no.2
• /
• pp.429-449
• /
• 1996

An objective definition of the anomaly is not avaliable and most investigators define the term differently or fail to describe their criterion. Because dental anomaly may lead to many complications, early detection and diagnosis of dental anomalies are essential steps in the evaluation of the child patient and in treatment planning. These procedures require detailed medical and dental histories, through clinical examination and the use of radiographs. So, this study was designed to find out the prevalence of dental anomalies. The clinical and roentgenographic examination was undertaken for 8,054 children at age from 0 to 15 years and statistical analysis was done. The results were as follows : 1. Among the examined subjects, 2,134 subjects(26.5%) showed dental anomalies. The prevalence of individual dental anomalies were as follows : supernumerary teeth 15.6%, congenitally missing teeth 6.6%, fusion 2.2%, odontoma 0.35%, microdontia 1.2%, macrodontia 0.05%, gemination 0.22%, talon cusp 0.36%, dens evaginatus 0.24%, dens invaginatus 0.15%, dilaceration 0.27%, taurodontism 0.09%, abnormal tooth position 1.7%, natal & neonatal teeth 0.92%, amelogenesis imperfecta 0.01%. 2. Significant correlations between the groups with individual dental anomalies were as follows : between group I and other groups, there was negative correlation, especially group I and group II. And the correlation coefficient between male and female showed differences. 3. For the supernumerary teeth group, the prevalence of male was higher than female(p<0.001). While for the congenitally missing teeth, macrodontia, microdontia, abnormal tooth position group, the prevalence of female was greater than male(p<0.001). 4. For the congenitally missing teeth group, the mandibular primary lateral incisor showed the highest incidence in primary dentiton, while mandibular lateral incisor in permanent dentition. In the mandible(72.5%), this site showed higher prevalence than in maxilla. In the case with deciduous congenitally missing teeth, the prevalence of successive permanent congenitally missing teeth was about 33.9%, the incidence was highest in mandibular lateral incisors. 5. Most supernumerary teeth existed on middle area and showed inverted position and unerupted state. In addition, supernumerary teeth showed higher incidence on maxilla (99.3%). 6. In the case with deciduous fused teeth, the prevalence of successive permanent congenitally missing teeth was 39.9%, while that of successive permanent fused teeth was 2.7%. And the highest rate of the prevalence (40.3%) appeared in fusion of mandibular deciduous lateral incisor and canine. 7. In the case of odontoma, the prevalence was higher in maxilla(78.6%) and anterior region(82.7%) than mandible and posterior region.

• Journal of dental hygiene science
• /
• v.6 no.1
• /
• pp.29-34
• /
• 2006

This study was undertaken to compare the tooth and arch size between crowding patient and normal subjects. Two group of dental casts were selected on the basis of crowding patients and normal subjects. One group, consisting of 40 pair of dental casts(20 male and 20 female), exhibited noncrowded dentitions. A second group, consisting of 40 pairs of dental cast(21 male and 21 female), exhibited remarkably crowding need for orthodontic treatment. Tooth width measurements were made with a sliding digital caliper with Vernier scale neared 0.01 mm. Mean, standard deviation, T-test of the following parameters were used to compare two group : individual mesiodistal crown widths, arch width and arch length. The following result were obtained. In the mesiodistal crown widths, normal subjects had generalized larger teeth than Wheeler's results(human tooth size index), except for maxillary central incisor, maxillary 2nd premolar, mandibular canine, and mandibular 1st molar. In the orthodontic patients with crowded dentitions, the mesiodistal tooth crown widths were generalized larger teeth than noncrowded normal subjects. In the arch width and arch length, the crowded dentition group had smaller arch width and arch length than the normal group.

• Journal of the Institute of Convergence Signal Processing
• /
• v.16 no.4
• /
• pp.149-155
• /
• 2015

Tooth implant is located in oral cavity and affects neck, skull base, and facail image. These magnetic inhomogeneities are usually frequency encoding direction which cause artifacts due to change of signal strength and geometric distortion. First, to evaluate signal to noise ratio (SNR) of magnetic resonance image caused by tooth implant this study uses meat phantom which is similar to human body and is consisted with fat, muscle, and water to measure signal to noise ratio. Second, signal to noise ratio by using custom-made fixed phantom is measured, and then signal to noise ratio size of different tooth implant types is compared and analyzed. The measured signal to noise ratio values of Brushite, HSA, Metal, and RBM for meat phantom were 2.76, 2.22, 1.88, and 1.57 on T1 SE, 1.88, 1.78, 1.65, and 1.79 on T2 FLAIR, 2.28, 2.25, 2.88, and 2.05 on T2 FSE, and 2.74, 1.94, 1.67, and 1.48 on T2 GRE. The measured signal to noise ratio values of Brushite, HSA, Metal, and RBM for fixed water phantom were 1.2, 1.06, 1.12, and 1.22 on DWI, 1.93, 1.87, 1.93, and 2.06 T1 SE, 1.83, 1.76, 1.82, and 1.92 on T2 FLAIR, 1.85, 1.79, 7.86, and 1.97 on T2 FSE, and 1.97, 1.93, 1.99, and 2.06 on T2 GRE. By considering through the results, patients and dentists need to consider some impacts from testing many aspects although their main purpose of having tooth implants is a dental restoration. Moreover, depending on the tooth implant characteristics of individual patients this study results can be used as baseline data when choosing test protocol.

• Journal of Korean Academy of Oral and Maxillofacial Radiology
• /
• v.29 no.2
• /
• pp.423-433
• /
• 1999

Purpose : To assess the methods for the clinical evaluation of the longitudinal bone changes after implantation of tooth ash-plaster mixture into the defect area of human jaws. Materials and methods : Tooth ash-plaster mixtures were implanted into the defects of 8 human jaws. 48 intraoral radiograms taken with copper step wedge as reference at soon, 1st, 2nd, 4th, and 6th week after implantation of mixture were used. X-ray taking was standardized by using Rinn XCP device customized directly to the individual dentition with resin bite block. The images inputted by Quick scanner were digitized and analyzed by NIH image program. Cu­equivalent values were measured at the implanted sites from the periodic digital images. Analysis was performed by the bidirectional subtraction with color enhancement and the surface plot of resliced contiguous image. The obtained results by the two methods were compared with Cu­equivalent value changes. Results : The average determination coefficient of Cu-equivalent equations was 0.9988 and the coefficient of variation of measured Cu values ranged from 0.08~0.10. The coefficient of variation of Cu-equivalent values measured at the areas of the mixture and the bone by the conversion equation ranged from 0.06 ~0.09. The analyzed results by the bidirectional subtraction with color enhancement were coincident with the changes of Cu-equivalent values. The surface plot of the resliced contiguous image showed the three dimensional view of the longitudinal bone changes on one image and also coincident with Cu-equivalent value changes after implantation. Conclusion : The bidirectional subtraction with color enhancement and the surface plot of the resliced contiguous image was very effective and reasonable to analyze clinically and qualitatively the longitudinal bone change. These methods are expected to be applicable to the non-destructive test in other fields.

• The korean journal of orthodontics
• /
• v.28 no.5 s.70
• /
• pp.791-802
• /
• 1998

The purpose of this study was to obtain the angulation and inclination of FACC of all teeth to FH plane. Study models of 31 persons with normal occlusion were selected and mounted on the semiadjustable articulator for this study. Using T.A.R.G. with a little modified method, the angulation and inclination of FACC of all teeth to FH plane were measured and then the measurements were analyzed statistically. The obtained results were as follows. Mean, standard deviation, maximum value, and minimum value of the angulation and inclination of FACC of upper and lower teeth were obtained. $\cdot$The FACC in both upper and lower arch was progressively lingually-inclined from anterior teeth to posterior teeth. $\cdot$In the angulations of FACC of upper teeth, central and lateral incisor showed similar value. Yet, the FACC of the rest was progressively distally-angulated from the canine to posterior teeth. The FACC in lower arch was progressively mesially-angulated from anterior teeth to posterior teeth. $\cdot$The angulation and inclination of FACC of any tooth in both upper and lower teeth correlated strongly and positively with the angulation and inclination of FACC of adjacent tooth.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.47 no.2
• /
• pp.205-212
• /
• 2020

The purpose of this study is to evaluate the validity of primary anterior zirconia crown made with Computer Aided Design/Computer Aided Manufacturing (CAD/CAM) technology by analyzing fracture strength and translucency parameter. Zirconia crown was designed with CAD software, using 3D scanned data of #61 tooth model. Crown fabrication was performed with CAM machine using zirconia block. Zirconia crowns were divided into 3 groups according to thickness(0.3, 0.5, and 0.7 mm), and fracture strength was compared with 1.0 mm thickness of resin strip crown. The compressive force was applied with universal testing machine at 30° along the incisal edge at increments of 1 mm/min. For translucency evaluation, 0.3, 0.5, and 0.7 mm thickness of zirconia specimens were fabricated and translucency was measured with spectrophotometer. Among zirconia groups, there was a significant increase in fracture strength as thickness increased (p < 0.05). The fracture strength of zirconia crown was significantly higher than resin strip crown in all groups (p < 0.05). Translucency parameter was highest in 0.3 mm group, and significantly decreased as thickness increased to 0.5 and 0.7 mm (p < 0.05). Thin primary anterior zirconia crown can be designed and fabricated according to individual needs by using CAD/CAM. Restoration with thin crown would reduce the amount of tooth reduction, risk of pulp exposure, and make more esthetic restoration possible.