• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 2006년도 International Symposium on GPS/GNSS Vol.1
• /
• pp.343-348
• /
• 2006

Number of researches on efficient terminal operation system applying RFID(Radio Frequency Identification) are on progress. However, RFID has limitations on tracking and providing accurate positions of containers. In this paper, to enhance the performance of the integrated terminal operation system, an efficient loading management of yard is proposed by applying RFID-based RTLS(Real Time Locating System) that provides real-time accurate positions of containers. We found that a group-based sequence system is more efficient than the existing individual sequence number system in the container yard. In the group-based sequence system, the containers in the same group should have similar characteristics such as port of destination(POD), size, weight, etc. In order to run this system, we have proposed the parameters to the unspecified N bytes of RFID tag which are specified in ISO 18000-7. And, this paper proposed a development of integrated operation system of container terminal using RFID for reducing the ship turnaround time in ubiquitous port environment.

• 한국군사과학기술학회지
• /
• 제12권5호
• /
• pp.667-675
• /
• 2009

Faults can be generated at electric power systems by variety of both certain and uncertain reasons, which may cause harmful effects on electrical apparatuses under operation and stability of electric power system operations, and may also lead to great confusions and inconveniences to individual livings, public works, industrial activities, services, military affairs, etc.. In some cases, intentional inductions of faults are committed for specific purposes, and it is necessary to understand the procedures of fault by some foreign materials. In this paper, compositions and operations of electric power systems, summaries of electrical fault phenomena and fault protection, and restrictions to power system operation were outlined. And the analogies on the procedure of faults from former papers were introduced, and test results that revealed the validity of those analogies were also introduced.

• 한국식품조리과학회지
• /
• 제20권3호
• /
• pp.247-255
• /
• 2004

The foodservice industry is changing more and more from on-site foodservice management to contract foodservice management. However there are differences according to the level of management and operation of contract foodservice management company (CFMC). The necessity of certification on CFMC is increasing to enable fair discrimination of CFMC among most clients that want to contract with CFMC. This study was performed to identify the foodservice operation evaluation model's criteria items for certifying CFMC. The analysis research methods included literature review, content analysis, individual interview, Delphi technique, and brain storming. First, the following infrastructure items were prepared in the contractor's viewpoint: procurement, transparency of operation, menu development and operation system, nutrition service system, professional employee education, sanitation andsafety management system, customer satisfaction system, facility system, management information system (MIS), business and economics. Second, the evaluation criteria required by the contractor on the client's view point was similar to school foodservice, hospitalfoodservice, and business andindustry foodservice except extraordinary items of field. Third, evaluation criteria and detail categories and items were identified such as financial focus, customer focus, process focus, human focus, and renewal and development by grafting on intellectual capital evaluation methodology for CFMC.

• 한국항공운항학회:학술대회논문집
• /
• 한국항공운항학회 2015년도 추계학술대회
• /
• pp.175-178
• /
• 2015

A-SMGCS(Advanced Surface Movement Guidance and Control system)의 ILCMS(Individual Light Control&Monitoring System) 고도화의 목표를 달성하기 위한 일체형 CCR(CONSTANT CURRENT REGULATOR)을 제작하고, 개발되어진 LCU(LOCAL CONTROL UNIT)모듈 및 LK CCR FILTER가 일체형 CCR의 실제 동작에 끼치는 영향과 일체형 CCR의 동작 상태를 실험을 통해 결과를 표현 하였다.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2011년도 전력전자학술대회
• /
• pp.271-272
• /
• 2011

The rising popularity of renewable energy sources resulted in development of the units of higher rated powers. As a result of the limited power handling capacity of individual devices, paralleling is the choice to increase the equipment rating, while keeping the THD of the current at the PCC within the agency specified standards. And their typical power circuit configuration limits the stress on individual devices to an appreciable extent. The main scope of this paper is the analysis of filter structure in paralleling inverter system's operation. Simulation results are shown to verify the theoretical analysis.

• 대한안전경영과학회:학술대회논문집
• /
• 대한안전경영과학회 1999년도 추계학술대회
• /
• pp.53-72
• /
• 1999

IPQC system was introduced for the flight safety at the age of scientific safety management in the 1980s. In spite of performing this system, aircraft accidents caused by human factors, which were above 70% among all flight accident factors, have not been reduced. Accordingly, throughout this paper I analyzed the aircraft accident factors by means of a literature study and a pilot survey. Then, based on the notion of TQC(Total Quality Control), I hierarchically classified Individual Quality into Capacity Management, Safety Management, and General Management and did the low-ranked management factors as well. AHP (Analytic Hierarchy Process), one of the scientific management methods, was used for estimating the relative importance of Individual Quality Control factors and the heavy aircraft accident causes over the last 20 years were analyzed according to the flight ranks. Based on the comparative analysis of results derived above, an IPQC model as flight ranks is established. In short, according to this newly suggested model we can obtain the maximum flight safety with the preventive actions against aircraft accidents caused by human factors and by improving the operation effect under the reasonable pilot management.

• International Journal of Aeronautical and Space Sciences
• /
• 제3권2호
• /
• pp.31-39
• /
• 2002

In this paper, KOMPSAT-2 on-board fault and ground recovery management design is addressesed in terms of hardware and software components which provide failure detection and spacecraft safing for anomalies which threaten spacecraft survival. It also includes ground real time up-commanding operation to recover the system safely. KOMPSAT-2 spacecraft fault and recovery management is designed such that the subsequent system configuration due to system initialization is initiated and controlled by processors. This paper will show that KOMPSAT-2 has a new design feature of CPU SEU mitigation for the possible upsets in the processor CPUs as a part of on-board fault management design. Recovery management of processor switching has two different ways: gang switching and individual switching. This paper will show that the difficulties of using multiple-processor system can be managed by proper design implementation and flight operation.

• 한국항해항만학회지
• /
• 제32권5호
• /
• pp.369-377
• /
• 2008

최근 컨테이너선의 대형화 추세와 항만간의 경쟁 가속화로 인해 컨테이너터미널의 효율적 운영과 생산성 향상에 대한 관심과 노력이 증대되고 있다. 특히 YT를 이용한 이송방식을 채택하고 있는 터미널의 경우 AGV(Automated Guided Vehicle)를 이용하고 있는 자동화터미널에 비해 상대적으로 경제성 및 운용효율성 측면에서 불리한 것이 사실이다. 최근 10여 년간 이와 같은 YT운용의 비효율성을 보완하기 위해 YT Pooling Operation 도입과 같은 노력이 계속되어 왔으나 개별 YT의 위치인식기능부재로 인한 제약으로 실질적인 효과는 미미한 수준이었다. 본 연구에서는 최근 주목받고 있는 RTLS(Real Time Location System) 기술을 활용하여 기존 YT Pooling Operation의 제약사항을 해결하는 새로운 개념의 YT Dynamic Operation 모델을 세안한다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2002년도 추계학술대회 논문집 전력기술부문
• /
• pp.234-236
• /
• 2002

The Co-Gen System which maximize energy efficiency was installed at the industrial plants at the initial stage. However Small Scale Co-Gen System was expanded even to the general end-users such as housing and building owing to ESCO business recently. For this SSC, inter-connected operation to the utility is desirable due to voltage and frequency fluctuation following to unbalance between power output and load. Then voltage unbalance with utility system, frequency, increase of short circuit capacity, reclosing, and ALTS etc. should be fully considered for the inter-connected operation. Voltage variation, protection coordination, Co-Generators single running, and short circuit capacity should also be solved. To research the method and solve the problems through the field test and application, we study individual customers Co-Gen System as a case study.

• KEPCO Journal on Electric Power and Energy
• /
• 제4권2호
• /
• pp.107-114
• /
• 2018

In recent years, ESS (Energy Storage System) has been widely used in various parts of a power system. Especially, due to its fast response time and high ramp rate, ESS is known to play an important role in regulating grid frequency and providing rotational inertia. As the number of installed and commercially operating ESSs increases, the reliability becomes an important issue. This paper introduces control schemes and presents its test method for grid-connected ESS for primary frequency regulation. The test method allows to verify the control operation in the individual operation mode and state. A validation of the method through actual ESS test in a electrical substation is presented in the case study section.