• 한국태양에너지학회 논문집
• /
• 제26권4호
• /
• pp.55-61
• /
• 2006

Titanium oxide ($TiO_2$) films are deposited on the indium tin oxide (ITO) substrate in an $Ar/O_2$ atmosphere by using reactive RF (Radio Frequency) magnetron sputtering technique, and Electrochromic properties and durability of $TiO_2$ films deposited at different preparation conditions are investigated by using UV-VIS spectrophotometer and cyclic voltammetry Li+ interalation/deintercalation in $TiO_2$ films shows that the electrochromic properties and durability of as-deposited films strongly depend on gas pressure $TiO_2$ films formed in our sputtering conditions are found to remain transparent, irrespective of their Li+ ion contents. The optimum sputtering conditions for film as passive counter electrode in electrochromic devices are working pressure of $1.0\;{\times}\;10^{-2}\;torr$ and oxygen flow raes of $10{\sim}15\;sccm$, respectively.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2008년도 추계학술대회 논문집 Vol.21
• /
• pp.64-64
• /
• 2008

연속공정이 가능한 Roll to Roll sputter system을 이용하여 플렉시블 indium tin oxide(ITO) 투명전극을 PET(polyethlyene terephthalate) 기판위에 성막하였다. 연속 성막공정을 위해 Roll to Roll sputter system에서의 unwinder roller와 rewinder roller를 이용한 servomotor의 rolling으로 기판의 움직임이 완벽히 제어되었으며, 외부 응력으로 부터의 안정성 및 성막 공정 시의 PET 기판의 열적 변형을 최소화하기 위한 접촉식 냉각방식의 cooling system을 main drum으로 사용하였다. 또한 고분자 기판과 투명전극 사이의 adhesion을 향상시키기 위한 전처리 공정으로 gridless linear ion beam source를 pretreatment system으로 구축하였다. 이렇게 제작된 Roll to Roll sputter system을 이용하여 PET 기판위에 연속공정을 통해 ITO 투명전극을 성막하였다. 성막된 플렉시블 ITO/PET 투명전극은 XRD, HREM, SEM 분석을 통하여 main drum의 cooling에 의해 완전한 비정질 구조를 나타내었음을 확인할 수 있었으며, 비록 Roll to Roll sputter system을 통하여 상온에서 성막 되었음에도 불구하고 최적화 된 조건에서 가시광선 영역 83.46 %의 높은 광투과도 값과 47.4 Ohm/square의 비교적 낮은 먼저항 값을 얻을 수 있었다. 또한 Bending test 결과를 통하여 ion source의 전처리 공정으로 굽힘/평의 반복적 응력에 따른 전기적 특성 열화를 최소화 할 수 있음을 보였다. 최적화된 플렉시블 투명전극을 이용하여 P3HT:PCBM 기반의 플렉시블 유기태양전지를 제작하였으며, 제작된 유기태양전지로부터 1.88%의 power conversion efficiency (PCE)을 확보함으로써 플렉시블 유기태양전지 제작을 위한 ITO/PET 투명전극 성막 공법으로써 Roll to Roll sputter system의 적용가능성을 확인할 수 있었다.

• Bulletin of the Korean Chemical Society
• /
• 제31권5호
• /
• pp.1415-1418
• /
• 2010

• Bulletin of the Korean Chemical Society
• /
• 제11권2호
• /
• pp.105-108
• /
• 1990

A spectroelectrochemical study on the redox chemistry of polyaniline (PANI) was carried out by using indium-tin oxide (ITO) transparent electrode in aqueous acidic solutions. Three different PANI-derived species were observed depending on the potential. The most highly oxidized species having alternating benzenoid-quinoid structures degraded through hydrolysis reaction. The degradation products were confirmed to be p-benzoquinone (BQ) and p-diaminobenzene (PDAB) by spectrophotometry anld potentiostatic experiments. Finally, a degradation mechanism is deduced from the observed behaviour.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2007년도 하계학술대회 논문집 Vol.8
• /
• pp.444-445
• /
• 2007

Aluminum-doped zinc oxide (AZO) films are attractive materials as transparent conductive electrode because they are inexpensive, nontoxic and abundant element compared with indium tin oxide (ITO). AZO films have been deposited on glass (coming 1737) substrates by RF magnetron sputtering system. An ultrathin layer of nickel oxide (NiO) was deposited on the AZO anode to enhance the hole injections in organic light-emitting diodes (OLED). The current density-voltage and luminescence-voltage properties of devices were studied and compared with ITO device.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2005년도 하계학술대회 논문집 Vol.6
• /
• pp.615-616
• /
• 2005

Carbon Nanotubes (CNT) on flexible indium tin oxide (ITO) PET films were prepared for dye-sensitized solar cell (DSSC). These CNTs were prepared by spray coating method for various amount of light transparency. Also, Pt counter electrode was prepared by electro deposition method. All $TiO_2$ electrodes were deposited on ITO-PET films by spray coating method. Micro structural images show that CNT counter electrodes prepared by spray-coating have more dense structure with increasing spraying time (0 to 60 seconds). DSSC consisting of $TiO_2$ electrode and CNT counter electrode was fabricated with various amount of light absorption. DSSC have higher light energy conversion efficiency with increasing the thickness of CNT counter electrode. CNT counter electrode is at least compatible to that of CNT counter electrode.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2003년도 International Meeting on Information Display
• /
• pp.885-886
• /
• 2003

A bilayer is used as an anode electrode for organic electroluminescent devices. The bilayer consist of an ultrathjn ZnO layer adjacent to an hole-transporting layer and an Indium tin oxide(ITO) outerlayer. We tried to bring low the barrier between the devices as deposited ZnO films on ITO substrates. We fabricated the organic EL structure consisted of Al as cathode, $Al_{2}O_{3}$ as electro transport layer, Alq3 as luminously layer, triphenyl diamine(TPD) as hole transport layer and ZnO(l nm )/ITO(l50 nm) as anode. The result of this experiment was not good compared with the case of using ITO, Nevertheless, at this structure we obtained the lowest turn-on voltage as the value of 19 V and the good brightness (6200 $cd/m^{2}$) of the emission light from the devices. Then the quantum efficiency was to be 1.0%.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2009년도 제40회 하계학술대회
• /
• pp.1096_1097
• /
• 2009

Aluminium doped zinc oxide(ZnO:Al) thin film, which is mainly used as a transparent conducting electrode in electronic devices, has many advantages compared with conventional indium tin oxide(ITO). In this paper in order to investigate the possible application of ZnO:Al thin films as a transparent conducting electrode for flexible film-typed dye sensitized solar cell (FT-DSCs), ZnO:Al and ITO thin films were prepared on the polyethylene terephthalate (PET) substrate by r. f. magnetron sputtering method. Specially one-inched FT-DSCs using either a ZnO:Al or ITO electrode were also fabricated separately under the same manufacturing conditions. Some properties of both the FT-DSCs with ZnO:Al and ITO transparent electrodes, such as conversion efficiency, fill factor, and photocurrent were measured and compared with each other. The results showed that by doping the ZnO target with 2 wt% of $Al_2O_3$, the film deposited at discharge power of 200W resulted in the minimum resistivity of $2.2\times10^{-3}\Omega/cm$ and at ransmittance of 91.7%, which are comparable with those of commercially available ITO. Two types of FT-DSCs showed nearly the same tendency of I-V characteristics and the same value of conversion efficiencies. Efficiency of FT-DSCs using ZnO:Al electrode was around 2.6% and that of fabricated FT-DSCs using ITO was 2.5%. This means that ZnO:Al thin film can be used in FT-DSCs as a transparent conducting layer.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2014년도 제46회 동계 정기학술대회 초록집
• /
• pp.273.2-273.2
• /
• 2014

Sputtering process has been widely used in Si-based semiconductor industry and it is also an ideal method to deposit transparent oxide materials for thin-film transistors (TFTs). The oxide films grown at low temperature by conventional RF sputtering process are typically amorphous state with low density including a large number of defects such as dangling bonds and oxygen vacancies. Those play a crucial role in the electron conduction in transparent electrode, while those are the origin of instability of semiconducting channel in oxide TFTs due to electron trapping. Therefore, post treatments such as high temperature annealing process have been commonly progressed to obtain high reliability and good stability. In this work, the scheme of electron-assisted RF sputtering process for high quality transparent oxide films was suggested. Through the additional electron supply into the plasma during sputtering process, the working pressure could be kept below $5{\times}10-4Torr$. Therefore, both the mean free path and the mobility of sputtered atoms were increased and the well ordered and the highly dense microstructure could be obtained compared to those of conventional sputtering condition. In this work, the physical properties of transparent oxide films such as conducting indium tin oxide and semiconducting indium gallium zinc oxide films grown by electron-assisted sputtering process will be discussed in detail. Those films showed the high conductivity and the high mobility without additional post annealing process. In addition, oxide TFT characteristics based on IGZO channel and ITO electrode will be shown.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2016년도 제50회 동계 정기학술대회 초록집
• /
• pp.295-295
• /
• 2016

Recently, TCO films with low carrier concentration, high mobility and high work function are proposed beneficial as front electrode in HIT solar cell due to free-carrier absorption in NIR wavelength region and low Schottky barrier height in the front TCO/a-Si:H(p) interface. We report high transmittance and work function zirconium-doped indium tin oxide (ITO:Zr) films with various plasma (Ar/O2 and Ar) conditions. The role of (Ar/O2) plasma was to enhance the work function of the ITO:Zr films whereas the pure Ar plasma based ITO:Zr showed good electrical properties. The RF magnetron sputtered ITO:Zr films with low resistivity and high transmittance were employed as front electrode in HIT solar cells, yield the best performance of 18.15% with an open-circuit voltage of 710 eV and current density of 34.63 mA/cm2. The high work function ITO:Zr films can be used to modify the front barrier height of HIT solar cell.