• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.27 no.3
• /
• pp.146-150
• /
• 2014

As a method of simple patterning of transparent conductive oxide (TCO) films deposited on flexible substrates, laser direct etching was carried out on TCO films sputtered on polycarbonate (PC) substrates. As a result of different binding energies in TCO films, indium tin oxide (ITO) and indium gallium zinc oxide (IGZO) were more easily etched than zinc oxide with different $Nd:YVO_4$ laser beam conditions.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.02a
• /
• pp.257-257
• /
• 2011

The amorphous indium-gallium-zinc-oxide (a-IGZO) materials for use in high performance display research fields are strongly investigated due to its good performance, such as high mobility and better transparency. However, the stability of a-IGZO materials is increasingly becoming one of critical issues due to the sub-gap electron trap sites induced by rough interfaces during deposition processing. It is well-known that the threshold voltage shift is related to interface roughness and oxygen vacancy formed by breaking weak chemical bonds. Here, we report the better properties of transparent oxide transistors by reducing the threshold voltage shift with an external rf plasma supported magnetron sputtering system. Mainly, our sputtering method causes the surface of sample to be sleek, so that it prevents the formation of various defects, such as shallow electron trap sites in the interface. External rf power was applied from 0 to 50W during RF sputtering process to enhance the stability of our oxide transistor without having a large voltage shift. To observe the effects of external rf-plasma source on the properties of our devices, Scanning Electron Microscopy (SEM), Atomic Force Microscopy (AFM), Transmission Electron Microscopy (TEM) are carried out to observe surface roughness and morphology of sputtered thin film. In addition, typical electrical properties, such as I-V characteristics are analyzed.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2015.08a
• /
• pp.209.1-209.1
• /
• 2015

Indium gallium zinc oxide (IGZO), indium zinc oxide (IZO) 그리고 zinc tin oxide (ZTO) 같은 zinc oxide 기반의 산화물 반도체는 높은 이동도, 투과도 그리고 유연성 같은 장점을 갖고 있어, display application의 backplane 소자로 적용되고 있다. 또한 최근에는 산화물 반도체를 이용한 thin-film transistor (TFT) 뿐만아니라 resistive random access memory (RRAM), flash memory 그리고 pH 센서 등 다양한 반도체 소자에 적용을 위한 연구가 활발히 진행 중이다. 그러나 zinc oxide 기반의 산화물 반도체의 전기 화학적 불안정성은 위와 같은 소자에 적용하는데 제약이 있다. 산화물 반도체의 안정성에 영향을 미치는 다양한 요인들 중 한 가지는, sputter 같은 plasma를 이용한 공정 진행 시 active layer가 plasma에 노출되면서 threshold voltage (Vth)가 급격하게 변화하는 plasma damage effect 이다. 급격한 Vth의 변화는 동작 전압의 불안정성을 가져옴과 동시에 누설전류를 증가시키는 결과를 초래 한다. 따라서 본 연구에서는, IGZO 기반의 TFT를 제작 후 plasma 분위기에 노출시켜, power와 노출 시간에 따른 전기적 특성 변화를 확인 하였다. 또한, thermal annealing을 적용하여 열처리 온도와 시간에 따른 Vth의 회복특성을 조사 하였다. 이러한 결과는 추후 산화물 반도체를 이용한 다양한 소자 설계 시 유용할 것으로 기대된다.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.02a
• /
• pp.95-95
• /
• 2011

비정질 산화물 반도체(Amorphous oxide semiconductors: AOSs)는 대면적화에도 불구하고 높은 이동도를 가지고, 상온에서도 제작할 수 있고, 투명 플렉시블 디스플레이 소자에 사용할 수 있기 때문에 최근 들어 각광받고 있는 연구 분야이다. 본 연구에서는 스퍼터링을 이용하여 활성층을 Amorphous indium gallium zinc oxide(a-IGZO)로 증착할 시에 스퍼터의 파워와 챔버내의 Ar/O2 비율을 다르게 했을 때 소자에 미치는 영향을 MIS구조를 이용하여 분석했다. 또한 같은 조건의 a-IGZO 활성층을 사용한 박막트랜지스터(TFT) 소자의 절연막의 종류를 바꿔가며 제작했을때의 소자의 특성 변화에 대해서도 분석하였다. 먼저 60 nm 두께의 a-IGZO층을 Heavily doped된 N형 실리콘 기판위에 스퍼터링 파워와 가스 분압비를 달리하여 증착하였다. 그 후 30 nm두께의 SiO2, Al2O3, SiNx 절연막을 증착하고, 마지막으로 열 증발 증착장비(Thermal Evaporator)를 이용하여 Al 전극을 150nm 증착하였다. 소자의 전기적 특성 분석은 HP4145와 Boonton 720을 사용하여 I-V와 C-V를 측정하였다. 위의 실험으로부터 스퍼터에서의 증착 rf파워가 증가할수록 a-IGZO 박막 트랜지스터에서의 캐리어 이동도가 감소하는 것을 볼 수 있었고, 챔버내의 가스분압비와 소자의 절연막의 종류가 변하면 a-IGZO 박막 트랜지스터의 전기적 특성이 변하는 것을 볼 수 있었다. 이러한 캐리어 이동도의 감소와 전기적 특성의 변화의 이유는 a-IGZO 활성층의 bulk trap과 절연막, 활성층 사이의 interface trap에 의한 것으로 보여진다.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2009.10a
• /
• pp.546-549
• /
• 2009

In this paper, we investigated the effects of different source/drain (S/D) electrode materials in thin film transistors (TFTs) based on indium-gallium-zinc oxide (IGZO) semiconductor. A transfer length and effective resistances between S/D electrodes and amorphous IGZO thin-film transistors were examined. Intrinsic TFT parameters were extracted by the transmission line method (TLM) using a series of TFTs with different channel lengths measured at a low drain voltage. The TFTs fabricated with Cu S/D electrodes showed the lowest contact resistance and transfer length indicating good ohmic characteristics, and good transfer characteristics with a field-effect mobility (${\mu}_{FE}$) of 10.0 $cm^2$/Vs.

• Journal of Information Display
• /
• v.12 no.1
• /
• pp.47-50
• /
• 2011

Highly stable amorphous indium.gallium.zinc-oxide (a-IGZO) thin-film transistors (TFTs) were fabricated with an etchstopper and via-hole structure. The TFTs exhibited 40 $cm^2$/V s field-effect mobility and a 0.21 V/dec gate voltage swing. Gate-bias stress induced a negligible threshold voltage shift (${\Delta}V_{th}$) at room temperature. The excellent stability is attribute to the via-hole and etch-stopper structure, in which, the source/drain metal contacts the active a-IGZO layer through two via holes (one on each side), resulting in minimized damage to the a-IGZO layer during the plasma etching of the source/drain metal. The comparison of the effects of the DC and AC stress on the performance of the TFTs at $60^{\circ}C$ showed that there was a smaller ${\Delta}V_{th}$ in the AC stress compared with the DC stress for the same effective stress time, indicating that the trappin of the carriers at the active layer-gate insulator interface was the dominant degradation mechanism.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2009.08a
• /
• pp.172-172
• /
• 2009

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.11 no.5
• /
• pp.1592-1596
• /
• 2010

According to the increase of the channel length with fixed width/length, characteristic curves of drain current as a function of gate bias voltage of indium gallium zinc oxide (IGZO) thin-film transistors moved to a positive direction of gate voltage, and field-effect mobility decreased. In case of fixed length and width of channel, field-effect mobility was lower and subthreshold slope was larger when drain bias voltage was higher. Due to large work function of IGZO, band bending at the junction region between IGZO channel and source/drain electrodes was expected to be in opposite direction to that between silicon and metal electrodes; this could explain the above results.

• Transactions on Electrical and Electronic Materials
• /
• v.16 no.3
• /
• pp.139-141
• /
• 2015

Contact resistance of interface between the channel layers and various S/D electrodes was investigated by transmission line method. Different electrodes such as Ti/Au, a-IZO, and multilayer of a-IGZO/Ag/a-IGZO were compared in terms of contact resistance, using the transmission line model. The a-IGZO TFTs with a-IGZO/Ag/a-IGZO of S/D electrodes showed good performance and low contact resistance due to the homo-junction with channel layer.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2014.02a
• /
• pp.352.1-352.1
• /
• 2014

Indium Tin Oxide (ITO) films are the most extensively studied and commonly used as ones of TCO films. The ITO films having a high electric conductivity and high transparency are easily fabricated on glass substrate at a substrate temperature over $250^{\circ}C$. However, glass substrates are somewhat heavy and brittle, whereas plastic substrates are lightweight, unbreakable, and so on. For these reasons, it has been recently suggested to use plastic substrates for flexible display application instead of glass. Many reaearchers have tried to produce high quality thin films at rood temperatures by using several methods. Therefore, amorphous ITO films excluding thermal process exhibit a decrease in electrical conductivity and optical transparency with time and a very poor chemical stability. However the amorphous Indium Gallium Zinc Oxide (IGZO) offers several advantages. For typical instance, unlike either crystalline or amorphous ITO, same and higher than a-IGZO resistivity is found when no reactive oxygen is added to the sputter chamber, this greatly simplifies the deposition. We reported on the characteristics of a-IGZO thin films were fabricated by RF-magnetron sputtering method on the PEN substrate at room temperature using 3inch sputtering targets different rate of Zn. The homogeneous and stable targets were prepared by calcine and sintering process. Furthermore, two types of IGZO TFT design, a- IGZO source/drain material in TFT and the other a- ITO source/drain material, have been fabricated for comparison with each other. The experimental results reveal that the a- IGZO source/drain electrode in IGZO TFT is shown to be superior TFT performances, compared with a- ITO source/drain electrode in IGZO TFT.