• Journal of the Korean Geotechnical Society
• /
• v.28 no.11
• /
• pp.5-16
• /
• 2012

Since geologic data are often sampled at sparse locations, it is important not only to predict attribute values at unsampled locations, but also to assess the uncertainty attached to the prediction. In this paper, the assessment of the local uncertainty of prediction for the depth to weathered soil was performed by using the indicator kriging. A conditional cumulative distribution function (ccdf) was first modeled, and then E-type estimate was computed for the spatial distribution of the depth to the weathered soil. Also, optimal estimate of spatial distribution for the depth to weathered soil was determined by using ccdf and loss function. The design procedure and method considering the minimum expected loss presented in this paper can be used in the decision-making process for geotechnical engineering design.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.9 no.6
• /
• pp.719-726
• /
• 2014

This paper addresses quality of experience(QoE) and how to measure and evaluate QoE including its subjective aspects. Adopting the real measurements on the field, a various quality metric have been measured for VoIP(voice over IP) service provided through a wireless interface of WiBro(Wireless Broadband). By analyzing the measured values and correlation between the metrics, we attempt to find a method to evaluate QoE of the VoIP service in a objective way. As a result, it has been shown that QoE of the VoIP service through WiBro network has close relation to the packet-level end-to-end delay, and the delay has close relation to received signal strength indicator(RSSI).

• Geophysics and Geophysical Exploration
• /
• v.10 no.4
• /
• pp.293-298
• /
• 2007

A new way to integrate various geophysical information for evaluation of RQD was developed. In this study, we does not directly define the RQD value where borehole data are not sampled. Instead, we infer the probability of RQD values with prior probability of data directly obtained from borehole, and secondary supporting probability from resistivity and seismic tomography data. First, we applied the geostatstical indicator kriging to get prior probability of RQD value, and indicator kriging with soft data to get the supporting probability from resistivity and seismic data. And we finally applied the permanence ratio rule to integrate these information. The finally obtained result was also analyzed to fully utilize the probabilistic features. For example, we showed the probability of wrongly classifying the RQD evaluation and vice versa. This kind of analytical result may be used for decision making process based on the geophysical exploration.

• Safety and Health at Work
• /
• v.12 no.4
• /
• pp.439-444
• /
• 2021

Background: In a previous study, we estimated exposure prevalence and the number of workers exposed to carcinogens by industry in Korea. The present study aimed to evaluate the optimal exposure intensity indicators of airborne lead exposure by comparing to blood lead measurements for the future development of the carcinogen exposure intensity database. Methods: Data concerning airborne lead measurements and blood lead levels were collected from nationwide occupational exposure databases, compiled between 2015 and 2016. Summary statistics, including the arithmetic mean (AM), geometric mean (GM), and 95th percentile level (X95) were calculated by industry both for airborne lead and blood lead measurements. Since many measurements were below the limits of detection (LODs), the simple replacement with half of the LOD and maximum likelihood estimation (MLE) methods were used for statistical analysis. For examining the optimal exposure indicator of airborne lead exposure, blood lead levels were used as reference data for subsequent rank correlation analyses. Results: A total of 19,637 airborne lead measurements and 32,848 blood lead measurements were used. In general, simple replacement showed a higher correlation than MLE. The results showed that AM and X95 using simple replacement could be used as optimal exposure intensity indicators, while X95 showed better correlations than AM in industries with 20 or more measurements. Conclusion: Our results showed that AM or X95 could be potential candidates for exposure intensity indicators in the Korean carcinogen exposure database. Especially, X95 is an optimal indicator where there are enough measurements to compute X95 values.

• Journal of Climate Change Research
• /
• v.7 no.3
• /
• pp.351-356
• /
• 2016

The carbon capture and storage (CCS), which collects and stores carbon dioxide in a geological site, is a promising option to mitigate climate change. However, there is the possibility of carbon dioxide leakage from the soil in the steps of collecting, transporting, and storing. To ensure the feasibility of this technology, it is important to monitor the leakage of carbon dioxide and to assess the potential impacts. As plants are sensitive to the changes in carbon dioxide in the soil environment, we can utilize plant parameter to detect the carbon dioxide leakage. Currently, chlorophyll a content is a conventional index indicating the changes in plants, however, this method is labor intensive and it only utilizes a small portion of leaves. To overcome its limitations, a simple spectroscopic parameter, DGCI (dark green color index), was suggested as an easy and quick indicator. In this study, we compared the values of chlorophyll a contents with DGCI from the experiment investigating the impacts of high underground $CO_2$ on grape plants. Results suggest that DGCI had high correlation with chlorophyll a contents and it has high potential to be utilized as an easy indicator to monitor plants' responses to $CO_2$ treatment.

• Journal of The Korean Society of Agricultural Engineers
• /
• v.61 no.1
• /
• pp.131-144
• /
• 2019

The purpose of study was to determine the hygrophyte index of each plant(HIP) considering the moisture environment condition (MEC) of the native plants on the downstream slope of the fill dam and evaluate its applicability which to develop a method to search for leaks and saturated zones of the fill dam for status evaluation of precision safety diagnosis. The HIP was weighted average and consisted of 19 ranks. The weighted average was calculated according to the following three procedures: First, the linear assumption was made according to the actual habitat environmental conditions, the second one was weighted to 10% of the optimal habitat condition, and finally the average value of the distribution range values. The Hygrophyte index of vegetation at each plot (HIV) was obtained from the Sinheung reservoir (Yesan-gun, Chungcheongnam-do) using the results of vegetation survey of the Sinheung reservoir with precision safety diagnosis and suggested the use of the hygrophyte index of the cultivated vegetation. The average HIP range of plant species that emerged in 50 survey sites on the downstream slope of the Sinheung reservoir is 2.99 to 3.56. The coefficient of variation showed a large difference depending on the appearance of the leakage indicator plant(LIP) species. The range of HIV is 2.80 to 4.26, the mean value is 3.37, standard deviation is 0.37 and the coefficient of variation is 9.7%. As a result, the value of the coefficient of variation showed a large difference depending on the appearance of the plant species.

• Korean Journal of Remote Sensing
• /
• v.36 no.6_3
• /
• pp.1681-1690
• /
• 2020

A scanning lidar system has been developed. The system has two wavelength observation channels of 532 and 1064 nm and is capable of 360-degree horizontal scanning observation. In addition, an analysis method that can classify the measured particle as an indicator of coarse-mode particle (PM2.5-10) and an indicator of fine-mode particles (PM2.5) and calculate the mass concentration of each has been developed by using the backscatter coefficient at two wavelengths. It was applied to the data calculated by observation. The mass concentrations of PM10 and PM2.5, which showed a distribution of 22-110 ㎍/㎥ and 7-78 ㎍/㎥, respectively, were successfully calculated in the Ulsan Onsan Industrial Complex using the developed scanning lidar system. The analyzed results showed similar values to the mass concentrations measured on the ground around the lidar observation area, and it was confirmed that high concentrations of 80-110 ㎍/㎥ and 60-78 ㎍/㎥ were measured at points discharged from factories, respectively.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.25 no.2
• /
• pp.55-67
• /
• 2022

Land use is a critical factor that affects the hydrological characteristics of watersheds, thereby determining the biological condition of streams. This study analyzes the effects of land uses in the watersheds on biological indicators of streams across the Han River basin using a linear model (LM) and generalized additive model (GAM). LULC and biological monitoring data of streams were obtained from the Korean Ministry of Environment. The proportions of urban, agricultural, and forest areas in the watersheds were regressed to the three biological indicators, including diatom, benthic macroinvertebrate, and fish of streams. The estimated LM and GAM models for the biological indicators were then compared, using regression determination R² and AIC values. The results revealed that GAM models performed better than the LM models in explaining the variances of biological indicators of streams, indicating the non-linear relationships between biological indicators and land uses in watersheds. Also, the results suggested that the indicator of macroinvertebrates was the most sensitive indicator to land uses in watersheds. Although non-linear relationships between watershed land uses and biological indicators of streams could vary among biological indicators, it was consistent that streams' biological integrity significantly deteriorated by a relatively low percentage of urban areas. Meanwhile, biological indicators of streams were negatively affected by the relatively high percentage of agricultural areas. The results of this study can be integrated into effective quantitative criteria for the watershed management and land use plans to enhance the biological integrity of streams. In specific, land uses management plans in watersheds may need more close attention to urban land use changes than agricultural land uses to sustain the biological integrity of streams.

• Korea Trade Review
• /
• v.45 no.2
• /
• pp.229-262
• /
• 2020

The price-to-earnings ratio (PER) is an important indicator to measure the stock price and profitability of a firm; it is also the most used valuation indicator among investors. When using the PER to compare the investment values of different stocks, these stocks must come from the same sector. This study mainly focuses on the China's listed manufacturing firms. By learning from previous research results and analyzing the current situation, we studied the correlation between the manufacturing sector's PER and its influencing factors from both macro and micro perspectives, the combination of which eventually sheds light on such correlation. Analyzing GDP growth rate data, Manufacturing Purchasing Managers' Index, and other macroeconomic variables from 2008 to 2018, we conclude that these variables jointly have a certain impact on the average PER of the manufacturing sector. We then form panel data based on relevant (2014-2018) data gathered from 317 of China's A-listed manufacturing firms to study the impact of micro-variables on PER. By using Stata and other software to analyze the panel data, we reach the conclusion that the Debt to Asset Ratio, Return on Equity, EPS growth rate, Operating Profit Ratio, Dividend Payout Ratio, and firm size have a significant impact on PER. The Current Ratio, Treasury Stock ratio and Ownership Concentration have no distinct effect on PER. Based on our empirical findings, we design a theoretical model that affects the PER.

• The Journal of Internal Korean Medicine
• /
• v.33 no.1
• /
• pp.1-13
• /
• 2012

Background : In oriental medicine, the status of the tongue is an important indicator to diagnose the condition of one's health, such as physiological and the clinicopathological changes of internal organs. A tongue diagnosis is not only convenient but also non-invasive, and therefore widely used in Oriental medicine. However, the tongue diagnosis is greatly affected by examination circumstances, patient's posture, and doctor's diagnosis criteria. Objectives : This study was designed to assure the necessity for standardization of tongue diagnosis based on diagnostic criteria of tongue coating thickness (TCT). Methods : Thirty tongue photographs were acquired and analyzed by digital tongue diagnosis system (DTDS) which measured the percentage of TCT on the tongue surface. Fifteen oriental medical doctors evaluated TCT in 30 photographs. Afterward, the 15 assessors were trained for diagnostic criteria of TCT and evaluated the photographs again. The intraclass correlation coefficient (ICC) was used to obtain the agreement rate among the 15 assessors and the agreement rate between assessors' TCT scores and DTDS values. Results : The agreement rate among the 15 assessors after training was higher than before training. The agreement rate between assessors' TCT scores and DTDS values after training was also higher than before training. Furthermore, the difference of the agreement rate between before and after training was significant (p<0.05). Conclusions : The standardization of diagnostic criteria of TCT increased the agreement rate among the assessors and the agreement rate between assessors' TCT scores and DTDS values. Therefore, the standardization of diagnostic criteria is expected to contribute to the objectification and quantification of the tongue diagnosis system.