• Journal of Advanced Marine Engineering and Technology
• /
• v.23 no.1
• /
• pp.19-24
• /
• 1999

In this paper the emission characteristic of the ship's diesel engine with CPP(Controllable Pitch Propeller) were investigated under the passage test on the sea. As the results it is confirmed that the NOx.$CO_x$ concentrations increase as the engine speed increases and the torque decreases. but the amount of NOx, COx emissions(g./k Wh) decrease as the torque increase regardless of the engine speed. Also it is compared with the NOx concentra-tions measured by the two method-ECC(Electrochemical Cell)and CLD(Chemiluminescence Detector)for the correct measurement and the ECC indicated higher value than the CLD.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.32 no.8
• /
• pp.582-588
• /
• 2008

An experimental investigation was conducted to investigate the effect of Bio-ethanol fuel on the engine performance and exhaust emission characteristics under various engine operating conditions. To investigate the effect of bio-ethanol fuel, the commercial 1.6L SI engine equipped with 4 cylinder was tested on EC dynamometer. The engine performance including brake torque, brake specific fuel consumption, and barke specific energy consumption of bio-ethanol fuel was compared to those obtained by pure gasoline. Furthermore, the exhaust emissions were analyzed in terms of regulated exhaust emissions such as unburned hydrocarbon, oxides of nitrogen, and carbon monoxide.Result of this work shows that the effect of blending of ethanol to gasoline caused drastic decrease of emissions under various operating conditions. Also, improved engine performance such as brake torque and brake power were indicated for bio-ethanol fuel.

• The Journal of Korean Academy of Prosthodontics
• /
• v.49 no.3
• /
• pp.197-205
• /
• 2011

Purpose: This study was to evaluate the accuracy of the implant torque controller used in dental clinics and to investigate whether it was applied appropriately. Materials and methods: Fifty dentists who work in dental clinics were enrolled in this study. Dental (implant) practice career, experience frequency of implant screw loosening and fracture, education of implant torque controller application and infection control methods were included in the survey. 25 Ncm and 30 Ncm of the tightening torque applied to the implant screw were measured by 50 clinicians. After measuring the torque value by using the torque controller, the torque mean according to where education about the implant torque controller was received was analyzed with independent t-test at the significance level of 0.05. Results: The torque controller used in private dental clinics showed 4.78% error ratio. When 50 dentists applied 25 Ncm to the implant screw was $29.0{\pm}8.4$ Ncm, and that in 30 Ncm was $34.3{\pm}9.1$ Ncm. Statistical significance was found between the group that was educated about implant torque application and the group that was not educated. Conclusion: During the prosthodontic treatment with implant, there was difference between actual applied torsion force and the amount torque controller indicated. Clinicians have to not only be well-informed about the accurate usage method of the torque controller, but also keep and manage the torque controller so as to maintain continuous and accurate torque values. Through this, it is considered to achieve clinical results to minimize problems of screw loosening or fracture.

• The Journal of Korean Physical Therapy
• /
• v.13 no.2
• /
• pp.325-333
• /
• 2001

The purpose of this study was to find out the effects of hallux valgus on the ankle plantarflexor and dorsiflexor peak torque, on the total work, on the average power, and on the Peak torque of plantarflexor to dorsiflexor ratio values. Isokinetic ankle plantarflexor and dorsiflexor strength was evaluated in 30 women(control: 15, hallux valgus: 15) by Cybex NORM System. Test data was gathered in the right ankle at a speed of 60/sec, 90/sec, 120/sec in the control group and the hallux valgus group. Statistical analysis was performed using SPSS 10.0 for windows software. Mean and standard deviations were measured and calculated for the General characterristic of subjects. A paired t-test was used to examine the differnces in the means for the ankle plantarflexor and dorsiflexor between two groups. Pearson coefficient correlation was used to examine the correlation of the hallux valgus and the peak torque. Analysis of variance indicated that isokinetic values of the control group were greater than the hallux valgus group(p<.05, p<.01).

• Transactions of the Korean hydrogen and new energy society
• /
• v.28 no.2
• /
• pp.225-230
• /
• 2017

Coal oil is widely used as a home heating fuel for portable and installed coal oil heaters. Today, Coal oil is widely used as fuel for jet engines and some rocket engines in several grades. This paper describes the performance characteristics according to the compression ratio of spark ignition engine fuelled with coal oil. As a result, the following knowledge is obtained: As the compression ratio is decreased, there is an increase in torque, indicated mean effective pressure (IMEP), heat release rate, and brake thermal efficiency. Higher compression ratio of the engine decreases the ignition delay period, combustion period, and cooling loss.

• Journal of ILASS-Korea
• /
• v.9 no.4
• /
• pp.9-16
• /
• 2004

A study of the propeny and performance effect of Indolene - Methanol Plus High Alcolhols (MPHA) has been completed. This study invested the measurement of fuel properties and performance parameters. The fuel properties investigated are distillation characteristics, heating valuer flash point, specific gravity and water tolerance. The performance parameters measured are minimum advance for best torque (MBT) spark timing, power output. The alcohol concentration was varied from 0 to 100 percent by volume in clear Indolene. The measurement of fuel properties indicated that, in general, Indolene - MPHA blends have higher water tolerance, similar specific gravity, similar flash point and different distillation characteristics compared to Indolene - Methanol blends. The performance parameters were measured using a single cylinder spark ignition engine at different compression ratios. The results of the performance measurements indicated that Indolene - MPHA blends have a higher MBT spark advance, similar power output.

• Korean Journal of Applied Biomechanics
• /
• v.22 no.1
• /
• pp.55-63
• /
• 2012

The purpose of this study was to investigate the balance differences between skilled players and less-skilled players during Hakdariseogi motion of Keumgang Poomsae in Taekwondo. To achieve the study goal, total of 10 Taekwondo athletes; 5 skilled players(S, body mass: $67.0{\pm}5.7$ kg, height: $174.0{\pm}4.8$ cm, age: $20.0{\pm}2.0$ yrs) and 5 less-skilled players(LS, body mass: $73.0{\pm}4.9$ kg, height: $176.4{\pm}6.1$ cm, age: $20.8{\pm}1.3$ yrs) participated in this study. A three-dimensional motion analysis with 8 infrared cameras and one force plate whose sampling frequency as 30 Hz and 300 Hz, respectively, were performed. Participants' motion were divided into three phases which were preparation phase(P1), performing phase(P2) and maintaining phase(P3). The range and velocities of COP, the range and RMS of ground reaction torque and displacement between COM and center of BOS of each phase were computed. In this study, at P1 and P3 which were double and single stance, respectively, the range and M-L velocities of COP revealed significantly higher in LS compared with those of S(p<.05). At P2 which was single stance, LS indicated significantly higher in range of COP and ground reaction torque, and M-L velocities of COP than those of S(p<.05). The significantly shorter displacement between COM and center of BOS, however, was found in LS compared with that of S(p<.05). The results from our study indicated that S revealed more stable performance and a better posture control ability during performing Hakdariseogi motion.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.25 no.2
• /
• pp.97-104
• /
• 2016

In this study, the qualitative effects of the positional error of carrier pin holes on the planet load sharing characteristics of the three-point suspension gearbox of wind turbines were investigated experimentally. A 35-kW gearbox comprising two planetary gear stages and a parallel gear stage and size one-fourth of that of a 2-MW three-point suspension gearbox was used as the test gearbox. The strain gauges attached to the ring gear teeth of the input planetary gear stage were used for the purpose of this study. The applied loading conditions were 50%, 75%, and 100% of the rated torque, and the mesh load factor was used as the load sharing index. The experimental results indicated that both the magnitude and direction of the positional error of pin holes had a significant effect on the planet load sharing characteristics of the three-point suspension gearbox. In addition, an increase in the applied torque results in uniform load sharing.

• Journal of the Korean Society for Geothermal and Hydrothermal Energy
• /
• v.17 no.1
• /
• pp.23-32
• /
• 2021

Conventional wind power generators have limited installation sites due to low efficiency due to reverse resistance or high cut-in speed. To compensate for these problems, this study proposed another new type of tilting wind turbine. The key to this method is the structural design of a cylindrical cam with a guide groove that allows the blade to tilt. As the blade rotates by the cam, it tilts according to the angle. In the section that generates torque by receiving drag, the blade is made perpendicular to the wind. And it is a structure that creates a parallel state with the wind in the section where reverse resistance occurs. We prepared six types of cams considering the length of the section subject to drag, reverse resistance, tilting section. The performance was analyzed as the maximum value of the output, torque coefficient, and efficiency coefficient, which is indicated by setting different wind speed and low TSR.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.36 no.9
• /
• pp.915-921
• /
• 2012

In this study, we propose a new method for estimating the IMEP using difference pressure, which is the pressure difference between the cylinder pressure and the motoring pressure. The estimated IMEP, denoted as $IMEP_{diff}$, optimizes the theoretical IMEP calculation range based on the fact that the difference pressure exists between the start and the end of combustion. $IMEP_{diff}$ is verified to have a high linear correlation with IMEP with $R^2$ of 0.9955. The proposed method can estimate the IMEP with 21% of the cylinder pressure data and 31% of the calculation effort compared to the theoretical IMEP calculation method, and therefore, it has great potential for real-time implementations. The estimation and control performance of $IMEP_{diff}$ is validated by engine experiments, and by controlling $IMEP_{diff}$, the torque variation between the cylinders was reduced.