• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.11 no.9
• /
• pp.739-745
• /
• 1998

The objective of this paper is to provide experimental data of Er(rare- earth)doped $SiO_2$thin film made by sputtering methods. The deposition rate of silica glass by sputtering method was 55$\AA$/min. In EDD measurements, the average Er concentration in the deposited film was 0.77(wt%). After annealing at $900^{\circ}C$, the Cl concentration decreased from 3.79(wt%) to 1.52(wt%). The refractive indices of the core $n_1$, cladding $n_2$ were 1.458, 1.558 respectively at 632.8 nm. The refractive index difference between core and cladding, $\Delta$n was 0.1. The refractive index profile of core and cladding interface shows step profile. In the study, $SiO_2$ glass films of Si wafer were successfully doped with active erbium. Therefore, this experimental data will be applicable for fabrications of Er doped planar integrated optical device.

• Journal of Animal Science and Technology
• /
• v.50 no.4
• /
• pp.561-572
• /
• 2008

Responses of real-time control parameters, such as ORP, DO and pH, to the conditions of biological animal wastewater treatment process were examined to evaluate the stability of real-time control using each parameter. Also an optimum index for supplemental carbon source addition based on NOx-N level was determined under a consideration of denitrification rate by endogenous respiration of microorganism and residual organic matter in liquor. Experiment was performed with lab-scale sequencing batch reactor(SBR) and working volume of the process was 45L. The distinctive nitrogen break point(NBP) on ORP-and DO-time profiles, which mean the termination of nitrification, started disappearing with the maintenance of low NH4-N loading rate. Also the NBP on ORP-and DO-time profiles was no longer observed when high NOx-N was loaded into the reactor, and the sensitivity of ORP became dull with the increase of NOx-N level. However, the distinctive NBP was constantly occurred on pH(mV)-time profile, maintaining unique profile patterns. This stable occurrence of NBP on pH(mV)-time profile was lasted even at very high NOx-N:NH4-N ratio(over 80:1) in reactor, and the specific point could be easily detected by tracking moving slope change(MSC) of the curve. Revelation of NBP on pH(mV)-time profile and recognition of the realtime control point using MSC were stable at a condition of over 300mg/L NOx-N level in reactor. The occurrence of distinctive NBP was persistent on pH(mV)-time profile even at a level of 10,000mg/L STOC(soluble total organic carbon) and the recognition of NBP was feasible by tracing MSC, but that point on ORP and DO-time profiles began to disappear with the increase of STOC level in reactor. The denitrfication rate by endogenous respiration and residual organic matter was about 0.4mg/L.hr., and it was found that 0.83 would be accepted as an index for supplemental carbon source addition when 0.1 of safety factor was applied.

• Proceedings of the Optical Society of Korea Conference
• /
• 2002.11a
• /
• pp.210-211
• /
• 2002

• Smart Structures and Systems
• /
• v.19 no.2
• /
• pp.151-161
• /
• 2017

A new method is developed to estimate road profile in order to estimate IRI based on the ASTM standard. This method utilizes an accelerometer and a Dynamic Tire Pressure Sensor (DTPS) to estimate road roughness. The accelerometer measures the vertical axle acceleration. The DTPS, which is mounted on the tire's valve stem, measures dynamic pressure inside the tire while driving. Calibrated transfer functions are used to estimate road profile using the signals from the two sensors. A field test was conducted on roads with different quality conditions in the city of Brockton, MA. The IRI values estimated with this new method match the actual road conditions measured with Pavement Condition Index (PCI) based on the ASTM standard, images taken from an onboard camera and passengers' perceptions. IRI has negative correlation with PCI in general since they have overlapping features. Compared to the current method of IRI measurement, the advantage of this method is that a) the cost is reduced; b) more space is saved; c) more time is saved; and d) mounting the two sensors are universally compatible to most cars and vans. Therefore, this method has the potential to provide continuous and global monitoring the health of roadways.

• The Journal of Korean Academy of Sensory Integration
• /
• v.2 no.1
• /
• pp.33-42
• /
• 2004

Objective : To evaluate the sensory processing ability in relation to parenting stress and find the sensory modulation areas affecting the parenting stress in disabled children Methods : Parents of 124 children with disabilities between 3 to 7 years receiving occupational therapy in Seoul and Gyeonggi-do made out the questionnaire and in items of questionnaire, Short Sensory Profile and Parenting Stress Index of short form was included. Results : Among general information, parenting stress of parents had significant correlation with the degree of disability and correlation with the lower level 2 of Parenting Stress Index. The more sensory processing disability was increased, the more parenting stress was increased. Parenting stress showed the significant correlation with movement sensitivity area and under-responsiveness/behaivor area seeking specific stimulation among sensory processing areas and had significant correlation with tactile sensitivity and auditory filtering. Sensory processing areas which affect the most the Parenting Stress were movement sensitivity and under-responsiveness/behaivor area seeking the specific behavior among sensory control disabilities. Conclusion : The parenting stress of parents with the disabled children had the correlation with sensory processing ability. The difficulty of sensory processing increased the parenting stress. Hence, in order to improve children's sensory processing ability, the appropriately coping program should be developed and the appropriate intervention for improvement of sensory processing ability of children will be necessary.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.14 no.6
• /
• pp.1464-1473
• /
• 1990

Optimal design parameters are estimated from the sensitivity function and performance index variation. Suspension design modification for performance improvement and basic materials for practical applications are presented. The linear quarter model of a vehicle suspension is analyzed in order to represent the utilities of sensitivity analysis, and sensitivity function is determined in the frequency domain. The change of frequency response function is predicted, which depends on the design parameter variation and the property is verified by computer simulation. As an investigation results of sensitivity function for the vibrational amplitude of sprung mass to road profile input, it is shown that the most sensitive parameters are the suspension damping and the suspension stiffness. In order to identify the effects of these two parameters to the performance of suspension system, the performance index variation according to the changes of parameters is considered and then optimal design parameters are determined. It is verified that the system response is improved noticeably in the both of frequency and time domain after the design modification with the optimal parameters.

• International Journal of Highway Engineering
• /
• v.11 no.2
• /
• pp.167-174
• /
• 2009

The simulation of dynamic load was conducted based on surface profile on asphalt concrete pavement, vehicle speeds, and suspension types using a truck simulation program. The results of the simulated dynamic load based on different surface profile, vehicle speeds, and suspension types are analyzed. As pavement roughness and vehicle speed are increased, the dynamic load was increased. Walking beam suspension produces greater dynamic load than air spring suspension. Pavement damage index is calculated based on covariance of dynamic load and Paris-Erdogan fracture parameter, n which is based on creep compliance tests of asphalt mixtures used in Korea. The higher covariance of dynamic load, confidence level, and fracture parameter are used, the greater pavement damage index is obtained. Specification of pavement roughness can be developed in various vehicle speeds and asphalt mixtures, and pay factor can be determined after constructing asphalt concrete pavement using pavement damage concepts.

• Preventive Nutrition and Food Science
• /
• v.18 no.3
• /
• pp.157-162
• /
• 2013

The purpose of this study was to investigate the effects of the ethanol extract of Cynanchum wilfordii (ECW) on the blood lipid profile of hypercholesterolemic rats. Thirty 7-week-old male Sprague-Dawley rats were allowed free access to either a normal diet (AIN-93 diet), or 1% high-cholesterol diet with or without 0.5% or 1% ECW for 5 weeks. After sacrifice, the rat serum lipid profile was analyzed. The diets containing ECW decreased body weight gains compared to the normal diet. Serum HDL-cholesterol levels of ECW-fed groups were significantly increased in the hypercholesterolemic groups and normal groups (P<0.05). When 1% ECW was fed to the normal group, total cholesterol level was increased. Moreover, treatment of ECW in hypercholesterolemic groups yielded a dose-dependent and highly significant decrease in the atherogenic index as compared to the control. These results suggest that intake of Cynanchum wilfordii may help reduce the risks of hypercholesterolemia by increasing blood HDL-cholesterol and lowering the atherogenic index.

• Hip & pelvis
• /
• v.30 no.4
• /
• pp.219-225
• /
• 2018

Purpose: Ischiofemoral impingement (IFI)-primarily diagnosed by magnetic resonance imaging (MRI)-is an easily overlooked disease due to its low incidence. The purpose of this study was to evaluate the usefulness of false profile view as a screening test for IFI. Materials and Methods: Fifty-eight patients diagnosed with IFI between June 2013 and July 2017 were enrolled in this retrospective study. A control group (n=58) with matching propensity scores (age, gender, and body mass index) were also included. Ischiofemoral space (IFS) was measured as the shortest distance between the lateral cortex of the ischium and the medial cortex of lesser trochanter in weight bearing hip anteroposterior (AP) view and false profile view. MRI was used to measure IFS and quadratus femoris space (QFS). The receiver operating characteristics (ROC), area under the ROC curve (AUC) and cutoff point of the IFS were measured by false profile images, and the correlation between the IFS and QFS was analyzed using the MRI scans. Results: In the false profile view and hip AP view, patients with IFI had significantly decreased IFS (P<0.01). In the false profile view, ROC AUC (0.967) was higher than in the hip AP view (0.841). Cutoff value for differential diagnosis of IFI in the false profile view was 10.3 mm (sensitivity, 88.2%; specificity, 88.4%). IFS correlated with IFS (r=0.744) QFS (0.740) in MRI and IFS (0.621) in hip AP view (P<0.01). Conclusion: IFS on false profile view can be used as a screening tool for potential IFI.

• Journal of Korean society of Dental Hygiene
• /
• v.11 no.6
• /
• pp.923-938
• /
• 2011

Objectives : This study was attempted in order to grasp oral health level according to socio-demographic characteristics in elders in some communities, and to evaluate oral health status and its association. Methods : The subjects in this study were performed with 235 people, who were over 65 years and resided in Daejeon Province, from June 20 to July 10, 2011. An individual interview was held, and they got a dental checkup. As for data analysis, chi-square test, t-test, one-way ANOVA, pearson correlation were utilized. Methods : The subjects in this study were performed with 235 people, who were over 65 years and resided in Daejeon Province, from June 20 to July 10, 2011. An individual interview was held, and they got a dental checkup. As for data analysis, chi-square test, t-test, one-way ANOVA, pearson correlation were utilized. Results : The older age in the whole research subjects and the lower educational level led to the less remaining teeth and the larger missing teeth index. The decayed missing filled teeth index and the decayed missing filled teeth rate were higher in more women and older age and in the lower educational level. Tooth mortality rate was higher in the older age, the lower educational level, and the group of living together with spouse. The maxillary-mandibular fixed-bridge status in the mouth was indicated to be the highest in the full-denture mounting ratio as for elders in over 80 years old. Oral Health Impact Profile(OHIP-14) average score was $56.05{\pm}11.64$ in the whole research subjects The decayed missing filled teeth index and the decayed missing filled teeth rate showed significantly positive correlation with the decayed missing filled teeth rate, tooth mortality rate and showed significantly negative correlation with OHIP-14. Tooth mortality rate showed significantly negative correlation with OHIP-14 Oral Health Impact Profile(OHIP-14) showed significantly positive correlation with its factors. Conclusions : Accordingly, the policy effort is considered to be necessary that implements in elders in order to spend active senescence, and that elders' health and oral-health behavior can be implemented continuously and preventively through classification according to elders' physical function.