• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.12 no.6
• /
• pp.636-642
• /
• 2019

In this paper, we analyzed BER (Bit Error Rate) communication performance according to the detection order of MMSE (Minimum Mean Square Error) based soft decision interference cancellation. As the detection order method, antenna index order method, absolute value magnitude order method of channel elements, absolute value sum order method of channel elements, and SNR (Signal Noise Ratio) order method are proposed. BER performance for the scheme was measured and analyzed. As a simulation environment, 16-QAM (Quadrature Amplitude Modulation) modulation is used in an uncoded environment of an M×M multiple-input multiple-output system, and an independent Rayleigh attenuation channel is considered. The simulation results show that the performance gain is about 1.5dB when the SNR-based detection order method is M=4, and the performance gain is about 3.5dB when M=8 and about 3.5dB when M=16. The more BER performance was confirmed, the more the detection order method of the received signal prevented the interference and error spreading occurring in the detection process.

• Korean Journal of Animal Reproduction
• /
• v.19 no.2
• /
• pp.95-104
• /
• 1995

Mouse mammary epithelial cells(NMuMG) were maintained onto 6-well plates (3$\times$105 cells/well) or chambered slide (1$\times$104 cells/well), in DMEM supplemented with 10% fetal calf serum. After serum starvation for 24 hours, DMNB (1$\mu$M) was added and exposed to UV light (300nm, 3 second pulse) after 2 hours from DMNB addition in order to activate DMNB which induces a rapid transient increase in intracellular cAMP upon UV irradiation. EGF (100ng/ml) and/or IGF-I (10ng/ml) were treated at the time of UV irradiation. Nuclear labeling index was estimated as percent of nuclear labeled cells(percent of S phase of cells) by incorporation of 3H-thymidine into DNA(1 hour pulse with 1$\mu$Ci/ml). DMNB(1$\mu$M), EGF (100ng/ml) and/or IGF-I (10ng/ml) signifciantly increased nuclear labeling index than those of control (P<0.05). Addition of DMNB＋EGF or DMNB＋EGF＋IGF-I showed the interaction effect in nuclear labeling index (P<0.05). Protein kinase A activities by addition of EGF, IGF-I or EGF＋IGF-I were 10.5, 9.8 or 9.4 unit/mg protein, respectively, and no statistical difference was found in comparison with control (P>0.05). Additon of DMNB＋EGF showed the moderate interaction effect on tyrosyl kinase activity (P<0.1). In the fluorography analysis, there were no specific protein phosphorylation patterns were found at 1 or 15 minute by addition of DMNB. EGF and/or IGF-I. These results suggest that the interaction effect in nuclear labeling index by addition DMNB and EGF could be mediated through the modulation of tyrosyl kinase activity by cAMP.

• Journal of the Korean Ceramic Society
• /
• v.41 no.11
• /
• pp.826-833
• /
• 2004

In this study, photosensitivity dynamics in SiO$_2$ glass with the composition similar to that of silica Planar Lightwave Circuit (PLC) devices was investigated as a fundamental study prior to the device fabrication. Silica bulk glasses with similar composition to the core layer of PLC devices were prepared with variable composition of B$_2$O$_3$. The photosensitivity in boron and germanium co-doped SiO$_2$ glass yields refractive index change $\Delta$n as high as 10$\^$-3/. However such index modulation disappeared after annealing. From the result of annealing experiment and W absorption / Raman spectra, we conclude the compaction model is applicable to our glass system.

• ETRI Journal
• /
• v.13 no.4
• /
• pp.2-9
• /
• 1991

Buried-heterostructure lasers are more difficult to fabricate than weakly index guided or gain guided lasers. However, these strongly index guided structures are most suitable for a source of lightwave transmission systems. But, for conventional etched mesa buried heterostructure lasers, the regrowth of InP blocking layer is difficult and irreproducible. So, there are inevitable leakage currents flowing outside the active region resulting poor performance. To eliminate these problems, we used a planar buried heterostructure. As a results, the average threshold current was 28mA and the differential quantum efficiency was about 20% per facet for $1.3\mum$ GaInAsP/InP PBH-LD. The initial forward leakage current was not exceeding $1\muA$ and the reverse voltage for $-10\muA$ was -3V~-5V, these are improved figure of 1mA~10mA and -1V~-3V for EMBH laser diode. The chip modulation bandwidth was more than 2.4GHz for $1.5I_th$.

• Journal of the Institute of Convergence Signal Processing
• /
• v.24 no.1
• /
• pp.1-14
• /
• 2023

Underwater images carry information that is useful in the fields of aquaculture, underwater military security, navigation, transportation, and so on. In this research, we transmitted an underwater image through various underwater mediums in the presence of underwater turbulence and beam attenuation effects using a high-speed visible optical carrier signal. The optical beam undergoes scintillation because of the turbulence and attenuation effects; therefore, distorted images were observed at the receiver end. To understand the behavior of the communication media, we obtained the bit error rate (BER) performance of the system with respect to the average signal-to-noise ratio (SNR). Also, the structural similarity index (SSI) and peak SNR (PSNR) metrics of the received image were evaluated. Based on the received images, we employed suitable nonlinear filters to recover the distorted images and enhance them further. The BER, SSI, and PSNR metrics of the specific nonlinear filters were also evaluated and compared with the unfiltered metrics. These metrics were evaluated using the on-off keying and binary phase-shift keying modulation techniques for the 50-m and 100-m links for beam attenuation resulting from pure seawater, clear ocean water, and coastal ocean water mediums.

• Journal of Software Assessment and Valuation
• /
• v.15 no.2
• /
• pp.101-109
• /
• 2019

Lasers for optical broadband communication systems should have excellent frequency selectivity and modal stability. DFB(Distributed Feedback) lasers have low lasing frequency shift during high speed current modulation. In this paper, I have developed a simulation software and analysed threshold gain and lasing frequency of a lasing mode in longitudinal direction of an 1.55um DFB laser with two mirrors and without anti-reflection coatings, that have both an index- and gain-gratings. The grating phase on a left mirror face is fixed as π/2 and the grating phase on a right mirror face is varied. As the phases of the index and gain gratings on the right mirror facet are π and 0, κL should be in the range of 2~6 in order to enhance the frequency stability. In order to reduce the threshold current of a lasing mode, κL should be greater than 8, regardless of the grating phases on the mirror faces.

• Journal of Software Assessment and Valuation
• /
• v.15 no.1
• /
• pp.71-78
• /
• 2019

Lasers for optical broadband communication systems should have excellent frequency selectivity and modal stability. DFB lasers have low lasing frequency shift during high speed current modulation. In this paper, we have developed a simulation software and analysed beam profiles of a lasing mode in longitudinal direction of an 1.55um DFB laser with two mirrors and without anti-reflection coatings, that have both an index- and gain-gratings. As the phases of the index and gain gratings on the mirror faces are varied, the beam profiles |R(z)| and |S(z)| of the lasing mode with the emitted power ratio P_l/p_r are analysed and examined. In order to reduce the threshold current of a lasing mode and enhance the frequency stability, κL should be greater than 8, regardless of the grating phases on the mirror faces.

• Journal of information and communication convergence engineering
• /
• v.1 no.3
• /
• pp.163-168
• /
• 2003

This paper presents a cascade multilevel PWM rectifier without the isolation transformers for energy build-up at each inverter modules. The features and advantages of the proposed PWM rectifier can be summarized as follows; I) It realizes the high power high voltage AC/DC power conversion, 2) It uses no transformer which is bulky and heavy, 3) It has hybrid structure so that switching devices can be effectively utilized, 4) It produces high quality AC current even in high power high voltage applications, 5) The input power factor remains unity by simple modulation index control. The multilevel rectifier is analyzed by using the circuit DQ transformation whereby the characteristics and control equations are obtained. Finally, it will be shown that the system simulation reveals the validity of analyses.

• Journal of the Optical Society of Korea
• /
• v.7 no.4
• /
• pp.269-274
• /
• 2003

In this paper, a Gaussian apodization technique applied to a transmission volume hologram for holographic demultiplexer is proposed. The Gaussian apodized grating of 15 mm ${\times}$ 11mm size, $38{\mu}m$ thickness and 3.2 mm horizontal standard deviation of the Gaussian index modulation profile was fabricated. A 22-channel demultiplexer based on that grating has been optically demonstrated. The channel spacing, the interchannel cross-talk level and the channel uniformity of 0.8 nm, -30 dB and 1.5 dB, respectively, were obtained.

• Proceedings of the KIEE Conference
• /
• 2002.07b
• /
• pp.976-979
• /
• 2002

A new controller for switching audio power amplifier with digital PWM input is proposed- Bi-directional Saw-tooth Error Correction (BSEC). This control method for high quality switching amplifier is based on a pulsed edge correction approach using PWM audio signal input as a reference of power switching digital to analog converter. The proposed controller has excellent features such as wide error correction range and no limitation on the modulation index. The controller is implemented in the half-bridge class D amplifier and the performance is verified through hardware experiments. It delivers 100W into 4${\Omega}$ load with less than 0.2% of total harmonic distortion (THD) all over operating range and an maximum efficiency of 82%.