• International Journal of Highway Engineering
• /
• v.12 no.3
• /
• pp.49-57
• /
• 2010

This case study investigated red light violations at CBD, suburban and rural signalized intersections in chungbuk. The goal of this study is to understanding the collection between red light violations and various driver, vehicles and environmental factors. This study uses descriptive statistics analysis and logistics analysis with SPSS 12.0 software. The major results of this study are as follows. First, red light violations occurred at rural and CBD more than suburban area. Second, About 81.1% of the violators were traveling at or below the posted speed limit. Moreover, 77.3% of the violations occurred within 2 seconds after the on set of red light. Finally, the logistic regression model, which is statistically significant(chisquare=0.000, McFadde=0.265)was developed, and includes the local type(CBD/suburban/rural), violators' gender, season, vehicle type, time of day, vehicle speed as the independent variables. In this study did not find significant relationship between red light violators' age and their driving behavior approaching signalized intersections.

• Journal of Korea Water Resources Association
• /
• v.44 no.1
• /
• pp.1-8
• /
• 2011

This paper addresses the correlation between the flood damage cost and recovery cost. National data (15 regions) for 20 years, panel data, has been analyzed for this test. Model specification of panel data analysis depends on the characteristics of data set and "fixed" or "random" effects model can be used. The results are represented in both models. As we expected all independent variables show positive relationship with recovery cost, except for the number of death and suffers. The damage of public facilities, such as rivers and road are the major factors on the damage and recovery cost, which means that flood damage can not be decreased without decreasing damages of public facilities from floods. Especially, the recovery cost is always higher than the damage cost and investment for flood control. Unlikely, government investment for flood control is the highest and recovery cost is the always lower than da mage cost andinvestment in Japan. Which means that proper investment can reduce economic damage cost of flood and recovery cost.

• Journal of the Korean Society of Physical Medicine
• /
• v.7 no.3
• /
• pp.339-348
• /
• 2012

Purpose : The purpose of this study is to compare muscle activations of neck, trunk and leg in cerebral palsy of spastic diplegia with genu recurvatum and knee flexion contracture, when using anterior and posterior walkers. Methods : We selected 21 cerebral palsy and received the written consent to participate in this study. The inclusion criteria for participation required patients to have spastic diplegic CP; to be between 3~6 years of age, to have a GMFCS III grade, to have no botulinum toxin injection and orthopedics surgery within before six months starting the study. Measurements of muscle activities (sternocleidomastoid, splenius capitis, rectus abdominis, erector spinea, gluteus maximus, rectus femoris, medial hamstring and calf muscles) were evaluated anterior and posterior walker ambulations. Statistical evaluation of these data were accomplished by utilizing the paired t-test and independent t-test by SPSS 20.0 program. Significance level was set at p<.05. Results : The following results were obtained. There was significant difference on muscle activation of neck, trunk and legs(soleus except) in anterior and posterior walkers. There was no significant difference in muscle activation of neck but significant difference in muscle activation of trunk, legs between genu recurvatum and knee flexion contracture(rectus abdominis, medial hamstring when using anterior walker, rectus abdominis, erector spinea, gluteus maximus, medial hamstring when using posterior walker). Conclusion : The conclusion of this study is the different knee joint forms would have different effect on muscle activation of trunk and legs while cerebral palsy of spastic diplegic ambulated with anterior walker and posterior walker.

• Journal of Preventive Medicine and Public Health
• /
• v.45 no.4
• /
• pp.219-226
• /
• 2012

Objectives: To evaluate the risk of fractures related with zolpidem in elderly insomnia patients. Methods: Health claims data on the entire South Korean elderly population from January 2005 to June 2006 were extracted from the Health Insurance Review and Assessment Service database. We applied a case-crossover design. Cases were defined as insomnia patients who had a fracture diagnosis. We set the hazard period of 1 day length prior to the fracture date and four control periods of the same length at 5, 10, 15, and 20 weeks prior to the fracture date. Time independent confounding factors such as age, gender, lifestyle, cognitive function level, mobility, socioeconomic status, residential environment, and comorbidity could be controlled using the case-crossover design. Time dependent confounding factors, especially co-medication of patients during the study period, were adjusted by conditional logistic regression analysis. The odds ratios and their 95% confidence intervals (CIs) were estimated for the risk of fracture related to zolpidem. Results: One thousand five hundred and eight cases of fracture were detected in insomnia patients during the study period. In our data, the use of zolpidem increased the risk of fracture significantly (adjusted odds ratio [aOR], 1.72; 95% CI, 1.37 to 2.16). However, the association between benzodiazepine hypnotics and the risk of fracture was not statistically significant (aOR, 1.00; 95% CI, 0.83 to 1.21). Likewise, the results were not statistically significant in stratified analysis with each benzodiazepine generic subgroup. Conclusions: Zolpidem could increase the risk of fracture in elderly insomnia patients. Therefore zolpidem should be prescribed carefully and the elderly should be provided with sufficient patient education.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.23 no.2
• /
• pp.117-128
• /
• 2005

This study presented the route location method by applying AHP and evaluating quantitatively. This study developed the program that can be easily applied to this kind of road design, and built the decision support system fur route location. The study results are summarized as follows : We could quantitatively evaluate the appropriateness of exiting routes by applying the AHP based on GIS. If we apply this to the roads that will be newly constructed, we can make the objective and reliable route location when making road plans and basic designs. We improved the technique of route location by applying the decision support system with third-dimensional data, which considers even the vertical alignment plan, to the existing decision support system with second-dimensional data. had, since we call set those data such as vertical slope, earth-volume, structure size, location and construction cost to independent variables, we can make road designs more scientifically and reasonably.

• Journal of KIISE:Software and Applications
• /
• v.30 no.11
• /
• pp.1015-1024
• /
• 2003

In [1] we proposed a method to generate a test model (GFSM) from a set of scenarios of embedded software. Each scenario describes the interaction sequences for an external input event. Although these external events are generated and accepted alternatively and concurrently by embedded software, we considered only the alternative relations. In this paper, we describe an improved algorithm to generate GFSM from concurrent scenarios, and propose methods to reduce the number of transitions in the GFSM. The first is the synchronous interpretation of message passing instead of asynchronous one considering the real behavior of tasks in embedded software. The others apply the partial order techniques to the GFSM using independent regions. We apply the method to generate a reduced GFSM of embedded software running on a digital TV.

• Journal of the Korea Computer Industry Society
• /
• v.2 no.7
• /
• pp.945-952
• /
• 2001

In consequence of expansion of internet users, electronic commerce is becoming a new prototype for marketing and sales, arid most of electronic commerce sites or internet shopping malls provide a rich source of information and convenient user interfaces about the organizations customers to maintain their patrons. One of the convenient interfaces for users is service to recommend products. To do this, they must exploit methods to extract and analysis specific patterns from purchasing information, behavior and market basket about customers. The methods are association rules and sequential patterns, which are widely used to extract correlation among products, and in most of on-line electronic commerce sites are executed with users information and purchased history by category-oriented. But these can't represent the diverse correlation among products and also hardly reflect users' buying patterns precisely, since the results are simple set of relations for single purchased pattern. In this paper, we propose an efficient mining technique, which allows for multiple purchased patterns that are category-independent and have relationship among items in the linked structure of single pattern items.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.17 no.5
• /
• pp.696-700
• /
• 2007

A new method that improves the performance of the phonetic transcription based speech recognition system is presented with the speaker-independent phonetic recognizer. Since SI phoneme HMM based speech recognition system uses only the phoneme transcription of the input sentence, the storage space could be reduced greatly. However, the performance of the system is worse than that of the speaker dependent system due to the phoneme recognition errors generated from using SI models. A new training method that iteratively estimates the phonetic transcription and transformation vectors is presented to reduce the mismatch between the training utterances and a set of SI models using speaker adaptation techniques. For speaker adaptation the stochastic matching methods are used to estimate the transformation vectors. The experiments performed over actual telephone line shows that a reduction of about 45% in the error rates could be achieved as compared to the conventional method.

• Convergence Security Journal
• /
• v.18 no.5_2
• /
• pp.61-71
• /
• 2018

The ROK military, with changes in the environment. Furthermore, soldiers in their new generation, who have remote difference in their views and characters with former generation. This study attempts to confirm the effects of Coaching Leadership on the military life satisfaction, focused on the Platoon soldiers of ROK Marine Corps. For a more realistic study, the research model is designed through prior studies; Coaching Leadership are set as independent variables; military life satisfaction is selected as dependent variables and Self-efficacy is defined as a mediating variable. A questionnaire survey has been conducted on 1,450 soldiers, including all forces and all branch of ROKMC, January 18 to 25 February, 2016. Analysis were performed using SPSS/WIN 23.0. As a result, First, Coaching Leadership had positively significant with military life satisfaction and Self-efficacy. Second, Self-efficacy had significant effects on the military life satisfaction. Third, Self-efficacy was proven to have a partial mediating effect in the relationship between coaching leadership and military life satisfaction. Based on the results, the theoretical and practical implications of the research findings are discussed, and recommendation for future research are provided.

• Smart Structures and Systems
• /
• v.2 no.2
• /
• pp.115-126
• /
• 2006

The Terra-Scope system is an affordable 4-D down-hole seismic monitoring system based on independent, microprocessor-controlled sensor Pods. The Pods are nominally 50 mm in diameter, and about 120 mm long. They are expected to cost approximately $6000 each. An internal 16-bit, extremely low power MCU controls all aspects of instrumentation, eight programmable gain amplifiers, and local signal storage. Each Pod measures 3-D acceleration, tilt, azimuth, temperature, and other parametric variables such as pore water pressure and pH. Each Pod communicates over a standard digital bus (RS-485) through a completely web-based GUI interface, and has a power consumption of less than 400 mW. Three-dimensional acceleration is measured by pure digital force-balance MEMS-based accelerometers. These accelerometers have a dynamic range of more than 115 dB and a frequency response from DC to 1000 Hz with a noise floor of less than $30ng_{rms}/{\surd}Hz$. Accelerations above 0.2 g are measured by a second set of MEMS-based accelerometers, giving a full 160 dB dynamic range. This paper describes the system design and the cooperative shared-time scheduler implemented for this project. Restraints accounted for include multiple data streams, integration of multiple free agents, interaction with the asynchronous world, and hardened time stamping of accelerometer data. The prototype of the device is currently undergoing evaluation. The first array will be installed in the spring of 2006.