• Journal of Power Electronics
• /
• 제14권1호
• /
• pp.115-124
• /
• 2014

This paper presents the implementation of two-arm modulation (TAM) technique for the independent control of a two-induction motor drive fed by a five-leg inverter (FLI). A carrier-based space vector pulse width modulation technique for TAM is proposed to generate switching signals for FLI. Two independent three-phase space vector modulators are utilized to control two motors. The motor drive system applies two separate indirect field-oriented control methods. The stationary voltage outputs from the vector control are synthesized in the three-phase space vector modulator to generate switching signals for FLI. The performance of the independent control of the motors and the voltage utilization factor are likewise analyzed. Simulation and experimental results verify the effectiveness of the proposed method for the independent control of the two-motor drive system. The proposed technique is successfully validated by dSPACE DS1103 experimental work.

• 드라이브 ㆍ 컨트롤
• /
• 제15권4호
• /
• pp.139-147
• /
• 2018

• 한국신뢰성학회지:신뢰성응용연구
• /
• 제11권4호
• /
• pp.343-356
• /
• 2011

This paper proposes an accelerated life evaluation of drive shaft. The life test of drive shaft for independent suspension type AWD vehicle should be performed by use of the least test sample because many number of samples can't be used for the test because of its mass capacity and high price. We calculated the no failure test time by application of no failure test concept, and the already performed test data for drive shaft are applied for some kinds of reliability coefficients which are needed for calculation of life test time. And, for analysis of real driving condition of vehicle, the load spectrum is prepared using the needed road condition and vehicle data. The inverse power model is used for accelerated life test. The equivalent torque of load spectrum is achieved by use of Miner's Rule, and then the final accelerating condition is determined by decision of the accelerated test torque. This paper shows that the accelerated life test results corresponds with the target life and the proposed life test method can be very well applied to no failure life test for mass capacity machinery components.

• 로봇학회논문지
• /
• 제15권3호
• /
• pp.221-232
• /
• 2020

In a four-wheel independent drive platform, four wheels and motors are connected directly, and the rotation of the motors generates the power of the platform. It uses a skid steering system that steers based on the difference in rotational power between wheel motors. The platform can control the speed of each wheel individually and has excellent mobility on dirt roads. However, the difficulty of the straight-running is caused due to torque distribution variation in each wheel's motor, and the direction of rotation of the wheel, and moving direction of the platform, and the difference of the platform's target direction. This paper describes an algorithm to detect the slip generated on each wheel when a four-wheel independent drive platform is traveling in a harsh environment. When the slip is detected, a compensation control algorithm is activated to compensate the torque of the motor mounted on the platform to improve the trajectory tracking performance of the platform. The four-wheel independent drive platform developed for this study verified the algorithm. The wheel slip detection and the compensation control algorithm of the platform are expected to improve the stability of trajectory tracking.

• 한국정밀공학회지
• /
• 제29권7호
• /
• pp.745-752
• /
• 2012

The pivot steering of an individual wheel motor drive vehicle is an effective steering maneuver in the narrow road, but it has become a matter of concern that the torque input of each wheel is very difficult to determine. In this study, the independent yaw moment control was proposed for the smooth pivot steering control of an in-wheel drive vehicle. For this control method, the vertical forces of tires were estimated from the trailing arm dynamic model, and the yaw moments of individual wheels were calculated from the vehicle dynamic model. Dynamic simulation results showed that the independent yaw moment control was much more effective on the minimization of the instabilities of pivot steering in comparison with the conventional direct yaw moment control with yaw rate feedback.

• 드라이브 ㆍ 컨트롤
• /
• 제15권4호
• /
• pp.119-124
• /
• 2018

• 드라이브 ㆍ 컨트롤
• /
• 제15권4호
• /
• pp.102-107
• /
• 2018

• 드라이브 ㆍ 컨트롤
• /
• 제15권4호
• /
• pp.108-112
• /
• 2018

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2000년도 추계학술대회논문집 - 한국공작기계학회
• /
• pp.392-397
• /
• 2000

A methodology is proposed to share the design information of a gear drive using XML (eXtensible Markup Language). XML is the standard language of the next generation and can be used as a neutral and unique format shared by various Web applications. Since XML is a platform-independent meta-markup language, it is possible to reduce the additional programming efforts for Web applications by using the standardization of technical terminologies. In this study, the structure of design information about gears, shafts, keys and bearings in a gear drive has been made and the terminologies used in the gear drive design process have been authored. The XML DTD(Data Type Definition) for the gear drive design has been declared and the usage of the XML application has been shown.

• 한국산학기술학회논문지
• /
• 제10권9호
• /
• pp.2210-2220
• /
• 2009

대형 특수차량용 독립현가형 액슬은 극소수 전문업체에서 생산되며 설계, 제작, 시험평가 등 세부기술은 제공되지 않고 있다. 또한 액슬 제작을 위한 설계기준 설정에는 시작품을 실제 차량에 탑재하여 수년 이상 소요되는 내구성 시험이 필수적이다. 본 연구는 독립현가형 액슬의 핵심부품인 스루드라이브를 역설계방법으로 개발하였으며 개발목표 달성 확인에 필요한 시험평가기준을 제안하였다. 또한 CAD/CAE 도구를 사용하여 제품을 설계하고 설계검증을 거쳐 시제품을 제작하였다. 본 연구에 적용된 개발절차 및 방법은 차량의 동력전달계통 개발에 유용할 것이다.