• Korean Journal of Ornithology
• /
• v.25 no.2
• /
• pp.77-81
• /
• 2018

The Korean Crested ibis Nipponia Nippon is an endangered species. A pair of Crested ibis was introduced from China in October 2008, and a successful program of artificial incubation of the species, and over 200 animals have been successfully bred through the restoration project up to 2017 at Upo ibis restoration center. We assessed genetic diversity and sex determination in the Korean Crested ibis. In total, 228 Crested ibis (115 females and 113 males) were identified. And genetic diversity measures, observed heterozygosity, expected heterozygosity, and polymorphic information content values were lower in 2017 than those in 2016. The inbreeding coefficient showed that the degree of ancestry increased in 2017. The decrease in polymorphism and increase in the degree of ancestry is thought to be due to inbreeding in such a small group. In this study provided important insight into protocols for genetic management of the breeding population of Korean Crested ibis in Korea and will help in extending the restoration program.

• Asian-Australasian Journal of Animal Sciences
• /
• v.32 no.1
• /
• pp.72-81
• /
• 2019

Objective: To determine the effect of gut pH and rumen microbial fermentation on glycerol encapsulated in alginate and alginate-chitosan polymers. Methods: Glycerol was encapsulated at 2.5%, 5%, 7.5%, or 10% (w/w) with sodium alginate (A) and alginate-chitosan (AC) polymers. Surface morphology and chemical modifications of the beads were evaluated using scanning electron microscopy and Fourier transform infrared (FTIR) spectra. Encapsulation efficiency was determined at the 5% glycerol inclusion level in two experiments. In experiment 1, 0.5 g of alginate-glycerol (AG) and alginate-chitosan glycerol (ACG) beads were incubated for 2 h at $39^{\circ}C$ in pH 2 buffer followed by 24 h in pH 8 buffer to simulate gastric and intestinal conditions, respectively. In experiment 2, 0.5 g of AG and ACG beads were incubated in pH 6 buffer at $39^{\circ}C$ for 8 h to simulate rumen conditions. All incubations were replicated four times. Free glycerol content was determined using a spectrophotometer and used to assess loading capacity and encapsulation efficiency. An in vitro experiment with mixed cultures of rumen microbes was conducted to determine effect of encapsulation on microbial fermentation. Data were analyzed according to a complete block design using the MIXED procedure of SAS (SAS Institute, Cary, NC, USA). Results: For AG and ACG, loading capacity and efficiency were 64.7%, 74.7%, 70.3%, and 78.1%, respectively. Based on the FTIR spectra and scanning electron microscopy, ACG treatment demonstrated more intense and stronger ionic bonds. At pH 6, 36.1% and 29.7% of glycerol was released from AG and ACG, respectively. At pH 2 minimal glycerol was released but pH 8 resulted in 95.7% and 93.9% of glycerol released from AG and ACG, respectively. In vitro microbial data show reduced (p<0.05) fermentation of encapsulated glycerol after 24 h of incubation. Conclusion: The AC polymer provided greater protection in acidic pH with a gradual release of intact glycerol when exposed to an alkaline pH.

• Journal of Digital Convergence
• /
• v.19 no.6
• /
• pp.73-83
• /
• 2021

This study identified the factors that influence the problem solving intention of students who completed the action learning-based creativity programs based on the theory of reasoned action, and examined the influence relationship between these factors. As a result of the study, first, subjective norms of problem solving had a positive effect on problem solving intention, and second, attitude toward problem solving had a significant effect on problem solving intention. Third, it was found that students who had experience of participating in a patent education program applying the action learning methodology had a positive effect on the relationship between their attitude toward problem solving and their intention to solve the problem. These findings confirmed that in order to enhance the problem-solving intention, which is the basis for creativity of university students, it is important to spread the positive value of problem-solving within the university and to give students a positive attitude toward problem solving.

• Journal of Microbiology and Biotechnology
• /
• v.31 no.5
• /
• pp.705-709
• /
• 2021

Porphyromonas gingivalis (P. gingivalis) is a major bacterial pathogen that causes periodontitis, a chronic inflammatory disease of tissues around the teeth. Periodontitis is known to be related to other diseases, such as oral cancer, Alzheimer's disease, and rheumatism. Thus, a precise and sensitive test to detect P. gingivalis is necessary for the early diagnosis of periodontitis. The objective of this study was to optimize a rapid visual detection system for P. gingivalis. First, we performed a visual membrane immunoassay using 3,3',5,5'-tetramethylbenzidine (TMB; blue) and coating and detection antibodies that could bind to the host laboratory strain, ATCC 33277. Antibodies against the P. gingivalis surface adhesion molecules RgpB (arginine proteinase) and Kgp (lysine proteinase) were determined to be the most specific coating and detection antibodies, respectively. Using these two selected antibodies, the streptavidin-horseradish peroxidase (HRP) reaction was performed using a nitrocellulose membrane and visualized with a detection range of 10³-10⁵ bacterial cells/ml following incubation for 15 min. These selected conditions were applied to test other oral bacteria, and the results showed that P. gingivalis could be detected without cross-reactivity to other bacteria, including Streptococcus mutans and Escherichia fergusonii. Furthermore, three clinical strains of P. gingivalis, KCOM 2880, KCOM 2803, and KCOM 3190, were also recognized using this optimized enzyme immunoassay (EIA) system. To conclude, we established optimized conditions for P. gingivalis detection with specificity, accuracy, and sensitivity. These results could be utilized to manufacture economical and rapid detection kits for P. gingivalis.

• 한국생물공학회:학술대회논문집
• /
• 2005.04a
• /
• pp.580-583
• /
• 2005

The aim of this study was to prepare a hydrogels composed of alginate blended with a carboxymethyl scleroglucan (CMSC) and evaluate the feasibility of the hydrogels as a drug delivery system for a protein. The main advantage of the alginate/CMSC hydrogels is to improve a restricted drug release from alginate hydrogels. The CMSC was chemically synthesized with chloroacetic acid and confirmed using a FT-IR. The alginate/CMSC hydrogels were prepared at distinct compositions by crosslinking with calcium ions. The swelling ratios of these hydrogels increased significantly with increasing the content of CMSC. At pH 7.4, the swelling ratios of the hydrogels increased remarkably as compared to those at pH 1.2. In ovalbumin (OVA) release test, the amount of OVA released from the hydrogels showed higher as compared to those released at pH 1.2. In addition, the release of OVA was improved with increasing the content of CMSC. Thus, the alginate/CMSC hydrogels may be used as a potential system for oral delivery of protein drugs.

• 한국생물공학회:학술대회논문집
• /
• 2005.04a
• /
• pp.570-573
• /
• 2005

The spray method was chiefly used to prepare alginate microspheres. Additionally due to formation at mild conditions, the alginate microspheres were coated with chitosan. The particle size of alginate microspheres increased when the sodium alginate increased. Release pattern of OVA in alginate microspheres was evaluated at PBS buffer(pH 7.4) and HCl buffer(pH 1.2). Release rate of OVA from chitosan/alginate microsphere was also lower than that with the concentration of alginate in the microspheres, the amount of OVA released from alginate microspheres increased from alginate micorsphere. Therefore, the alginate microspheres can be prepared by spray rozzle for a protein drug delivery. OVA release from the alginate microspheres was controlled by a coating with chitosan.

• 한국생물공학회:학술대회논문집
• /
• 2005.04a
• /
• pp.574-578
• /
• 2005

The purpose of the study is to research the proper conditions to prepare the calcium-alginate microspheres using a emulsion method. The calcium-alginate microspheres were prepared at distinct concentrations (alginate; 1%, 1.5%, 2% (w/v), calcium chloride; 2%, 4%, 8%, 10%(w/v)). The shape of the microspheres prepared was spherical. With increasing alginate and calcium chloride concentration the mean size of the microspheres decreased gradually. In release test, the amount of ovalbumin released from the calcium-alginate mcirospheres was decreased by the increasing of alginate and calcium chloride concentration. In this study the best result was obtained at a 2% of alginate concentration and 10% of calcium chloride concentration.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.36 no.6
• /
• pp.646-653
• /
• 2003

Investigations were made on the population structure, sex ratio, growth, and recruitment patterns of Leptochela sydniensis in the southwestern coastal areas of Korea, between May 2000 and December 2001. Spawning period, fecundity, brood loss, reproductive output, and size at sexual maturity also were examined. The results of the sex ratio showed that females were more numerous than males during the overall study period. Parameters of growth were estimated using the modified von Bertalanffy growth function (VBGF) model incorporating seasonal variation into growth. Females grew somewhat faster and reached a larger size than males $(L\infty=12.80\;mm\;CL\;and\;K=0.70\;yr^{-1}\;or\;females,\and\;L\infty=12.08\;mm\;CL\;and\;K=0.69\;yr^{-1}$ for males). The structure of recruitment patterns obtained by the FiSAT program indicated one normally distributed group. Based on the occurrence of ovigerous females and the gonadosomatic index (GSI), the main spawning season was from June to August. Analysis of covariance indicated that brood loss was not observed during the incubation period. The size at which $50\%$ of females are mature is estimated as 5.48 mm CL.

• The Journal of the Korean dental association
• /
• v.58 no.1
• /
• pp.19-26
• /
• 2019

Purpose: The purpose of this study is to compare the adhesion of Candida albicans according to build angle in 3D printing denture base resin. Methods: The 3D printing was performed by setting the build angle of the disk type specimen designed by CAD program at 0 degree, 30 degrees, 60 degrees, and 90 degrees. Surface roughness was measured using a non-contact 3D microsurface profiler. The specimens were incubated in Candida albicans suspension for 24 hours. The attached Candida albicans were detached by cell scraper. The suspension of detached C. albicans was serially diluted and plated on Trypticase soy broth. After 48 hours of incubation, total colony forming unit was counted. Results: There was no significant difference in surface roughness(Sa) between the test groups, but the interlayer boundary was observed. There was no statistically significant difference in total colony forming units of Candida albicans between the test groups. Conclusion: There was no difference in the average surface roughness and adhesion of Candida albicans between the specimens. It is considered that the setting of the build angle should be set considering the accuracy or strength rather than the roughness of the surface.

• Asia-Pacific Journal of Business Venturing and Entrepreneurship
• /
• v.9 no.2
• /
• pp.187-200
• /
• 2014

Industry Cooperation is not the choice of national development but the inevitable component in the world. Industry cooperation results of the reconstruction of the country is an important place as an essential element of the economic development of the national policy in the major economies. Despite several changes in the international economic environment, United States, Canada, Finland, Sweden, Israel settled and maintaining the sustainable development of the countries which successfully established Industry-University Cooperation or Industry-Acaemy Cooperation system in history. In this study, delivered to the realistic ways of Industry cooperation through comparison study on domestic and international cooperation programs. The new activation programs of industry academic cooperation are delivered, that is, The bonus payments system of technology development patent and free technology transfer for joint development, bonus points system and evaluation indicators for joint capacity building program which participate student, industry and academic sector, step-by-step training. system for total employment and entrepreneurship at the same time strengthening management training programs and education opportunity gives to the benefits for the community members. Finally, Intellectual property expert matching program which develops basis of technology trader and expert maps in the smallest unit by administrative area. practice the internet information search services in national wide network for this matching program and government office dedicated to staffing for technology transfer.