• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 2004년도 추계학술발표대회 논문집
• /
• pp.278-281
• /
• 2004

In this paper, the thermomechanical responses of shape memory alloy (SMA) actuators and their applications as the shape adaptive structures combining SMA actuators produced in the form of strip with composite structures are investigated. The numerical algorithm of the 3-D SMA thermomechanical constitutive equations based on Lagoudas model is implemented to analyze the unique characteristics of SMA strip. Also, the incremental SMA constitutive equations are implemented in the user subroutine UMAT by using ABAQUS finite element program. The shape change of structure is caused by initially strained SMA strip bonded on the surface of the composite structure when thermally activated. Numerical results show that SMA strip actuator can generate enough recovery force to deform the composite structure and sustain the deformed shape subjected to large external load, simultaneously.

• 한국생산제조학회지
• /
• 제9권3호
• /
• pp.103-110
• /
• 2000

Shaft encoder which encodes the rotational angle of a shaft becomes more important recently due to factory automation and office automation. Although an absolute type encoder is more dsirable due to its convenience an incremental encoder is commonly used because of its cost and technical difficulties Fabricating a high resolution absolute encoder is very diff-cult because the physical size is limited by currently available technology. In order to overcome this difficulty Moire fringe can be used incorporated with gray code. In order to measure the position of fringes which move as the code disk rotates a neural network was developed in this paper. Formerly fringe position is usually measured by a sophisticated software which needs a little long calculation time. However using nerual network method can eliminate such calculation time even though it needs learning job The pro-posed method is verified through several experiments.

• 한국ITS학회 논문지
• /
• 제8권1호
• /
• pp.127-135
• /
• 2009

This paper presents a new technique for corner shape based object retrieval from a database. The proposed feature matrix consists of values obtained through a neighborhood operation of detected corners. This results in a significant small size feature matrix compared to the algorithms using color features and thus is computationally very efficient. The corners have been extracted by finding the intersections of the detected lines found using Hough transform. As the affine transformations preserve the co-linearity of points on a line and their intersection properties, the resulting corner features for image retrieval are robust to affine transformations. Furthermore, the corner features are invariant to noise. It is considered that the proposed algorithm will produce good results in combination with other algorithms in a way of incremental verification for similarity.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2006년도 정기 학술대회 논문집
• /
• pp.514-519
• /
• 2006

This paper presents a new nonlinear analysis algorithm which uses the equivalent nodal load for the element stiffness. The equivalent nodal load represents the influence of the stiffness change such as the addition of elements, the deletion of elements, and/or the partial change of element stiffness. The nonlinear analysis of structures using the equivalent load improves the efficiency very much because the inverse of the structural stiffness matrix, which needs a large amount of computation to calculate, is reused in each loading step. In this paper, the concept of nonlinear analysis using the equivalent load for the element stiffness is described and some numerical examples are provided to verify it.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2005년도 춘계학술대회 논문집
• /
• pp.20-26
• /
• 2005

A running-profile generation method has been developed that efficiently generates the minimum-energy running profile, even in railway lines which have complicated speed limit sections. In the developed method, the problem of minimizing energy consumption is formulated as a resource allocation problem by dividing a running profile into several blocks, and is solved by the incremental method. A concept of Uni-Braking Block (UBB) which has only one brake section within it is introduces for the formulation. This paper proposes a specific method for running profile in the railway lines by using UBB. And proposes the algorithm to generate the running profile with minimum-energy.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2007년도 추계학술대회 논문집
• /
• pp.289-292
• /
• 2007

The modular line-connected photovoltaic PCS (power conditioning system) is proposed. The proposed system consists of a step-up DC-DC converter and a full-bridge inverter. A step-up DC-DC converter using a dual series-resonant rectifier circuit and a active-clamp circuit is proposed to achieve a high efficiency and a high input-output voltage ratio efficiently. An IncCond (incremental conductance) MPPT (maximum power point tracking) algorithm that improves MPPT characteristic is used. By control a inverter using a linearized output current controller, a unity power factor is achieved. All algorithms and controllers are implemented on a single-chip microcontroller and the superiority of the proposed algorithms and controllers is proved by experiments.

• Tribology and Lubricants
• /
• 제24권2호
• /
• pp.90-95
• /
• 2008

An elastic-plastic contact analysis is developed using a semi-analytical method. The elastic contact is solved within a Hertz theorem. The reciprocal theorem with initial strains is then introduced, to express the surface geometry as a function of contact stress and plastic strains. The irreversible nature of plasticity leads to an incremental formulation of the elastic-plastic contact problem, and an algorithm to solve this problem is set up. Closed form expression, which give residual stresses and surface displacements from plastic strains, are obtained by integration of the reciprocal theorem. The distribution of contact stress, residual stress and plastic strain are obtained by the changed surface geometry.

• 한국정밀공학회지
• /
• 제23권2호
• /
• pp.191-198
• /
• 2006

Dieless CNC forming is an innovative technology which can form various materials with complex shape by numerically controlled incremental forming process. In this paper, a method of NC tool path generation based on an STL file for dieless CNC forming is proposed. Tool trajectory adopts the principle of layered manufacturing in rapid prototyping technology, but it is necessary to consider STL offset because of the ball shaped tool with a radius. Vertex offset method which enables to compute offset STL directly is engaged for STL offset. The offseted STL is sliced by cutting planes to generate contouring tool path. Algorithm is implemented on a computer and experimented on a dieless CNC forming machine to show its validity.

• 한국언어정보학회:학술대회논문집
• /
• 한국언어정보학회 2007년도 정기학술대회
• /
• pp.249-258
• /
• 2007

This paper presents an implementation of a gramar of Dynamic Syntax for Japanese. Dynamic Syntax is a grammar formalism which enables a parser to process a sentence in an incremental fashion, establishing the semantic representation. Currently the application of lexical rules and transition rules in Dynamic Syntax is carried out arbitrarily and this leads to inefficient parsing. This paper provides an algorithm of rule application and partitioned parsing state for efficient parsing with special reference to processing Japanese, which is one of head-final languages. At the present stage the parser is still small but can parse scrambled sentences, relative clause constructions, and embedded clauses. The parser is written in Prolog and this paper shows that the parser can process null arguments in a complex sentence in Japanese.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2002년도 하계학술대회 논문집 D
• /
• pp.2812-2814
• /
• 2002

대부분의 객체 지향 언어들은 여러 가지 연산을 구현하기 위한 방법으로 메쏘드(method)를 이용한다. 메쏘드는 생성함수(generic function)의 타입에 관련된 행동을 정의한다. 이런 메쏘드들이 서로 구별되는 인수를 이용해서, 생성 함수가 프로그램 수행시에 불려질 때 인수의 타입에 따라 어느 메쏘드를 수행할지 결정한다. 이런 메쏘드의 선택 과정은 가장 적용되기 가까운 메쏘드(most specific applicable method, MSA)를 구하기 위해서 단일의 인수를 사용할 것이냐, 모든 인수를 활용할 것이냐에 따라 단일 메쏘드와 다중 메쏘드로 구분된다. 이런 메쏘드를 선택하기 위해서 구현하는 방법으로는 캐슁이나 인라인 디스패치 테이블, 컬러링 기법이 있다. 본 논문에서는 디스패치 테이블을 이용한 기법에서 공간의 낭비없이 효율적으로 멀티메쏘드 디스패치를 구현할 수 있는 점진적 압축알고리즘을 제시한다.