• International Journal of Railway
• /
• 제5권2호
• /
• pp.93-101
• /
• 2012

Owing to the lightening of railway vehicles and increased operation speeds, the reduction of running safety in the presence of crosswind is becoming an important problem. In particular, the running safety tends to decrease when vehicles run on curved track. When a crosswind acts on a vehicle negotiating a curve from the outer side, flange climbing can occur. In this study, a full-vehicle model was constructed using the multi-body simulation software SIMPACK, and a simulation of a bogie vehicle with two-axle trucks negotiating a curve was carried out to examine the running safety under the condition where a crosswind acts on the vehicle from the outer side of the curve. As a result, it was verified that the derailment coefficient of the first wheelset becomes large in the exit transition curve and the coefficient of the third wheelset does in the entrance transition curve, and this trend becomes pronounced at low operation speeds in the presence of a stronger crosswind. It was also shown that the critical derailment coefficients obtained by modified Nadal's formula considering the effect of attack angle become close to the actual derailment coefficients at the timing that flange climbing occurs.

• The Korean Journal of Physiology
• /
• 제2권2호
• /
• pp.101-135
• /
• 1968

As physical fitness measured was muscle strength (hand grips, leg extention, back lift, and arm pull and thrust), skinfold thickness (5 different sites), circulatory function (resting heart rate and blood pressure), speed (kinesiological analysis during 100m sprint, record, maximal and final speed), motor function (50 meter dash, ball throwing, standing broad jump, and pull-ups), maximal aerobic power (maximum oxygen intake by field running method), muscle power (leg and arm by inertia ergometer), and general endurance (maximum endurance running time on the treadmill at the speed of 5 MPH and grade of 15.5%) of 1131 Korean children (boys 572, girls 559) aged of 6 to 17 years, who were randomly sampled from 24 primary, middle and high schools at the two districts of Seoul and KyungKi. The results are summarized as follows: 1) The status (height and weight) of the children was almost same as that of the previously reported Korean and Japanese children of same ages. 2) Muscle strength was a gained linearly with geting age in the boys and girls but there was a little improvement in girls aged of 13 years or more. 3) The mean skin fold thickness was increased linearly with geting ages in both sexes, but the girls from 12 to 17 years of age were increased rapidly, and maximum value was 17mm, while boys was 7.0 mm. 4) In the circulatory function, the resting heart rate was decreased, but the blood pressure was increased with ages in both sexes within the normal limits. 5) The maximum and final speed during 100 meter sprint increases with age in boys but girls who are 12 years old or older, were not improved any mere. The patterns of running were same in both sexes, and maximum speed reached at about 30 meters from starting line. 6) The motor function was increased with age in both sexes, but there was no improvement in 12 years of age or older girls. More over records of all functions except standing broad jump was less than those of Japanese in the same age, respectively. 7) The maximum oxygen intake (MOI) was increased considerably with ages and maximum values were 2.93 L/min (boys) and 2.09 L/min (girls) at the age of 17years. This result was almost same as that of the Japanese and Easter Island population, but the value was lower than that of Europe. The average of the maximum oxygen intake per kg body weight per minute from 9 to 17 years of age were around 53 ml in the boys and 42 ml in the girls. 8) Muscle power was increased linearly with ages in boys while there was relatively a little increment in girls. The maximum values of leg muscle in boys and girls at the 17 years of age were 0.168 and 0.088 horse power, respectively. 9) The maximum endurance running time was increased considerably from the age of 9 in boys, while there was no improvement in girls. The maximum values were 6.0 min and 1.8 min, respectively.

• 한국운동역학회지
• /
• 제15권4호
• /
• pp.153-168
• /
• 2005

The purposes of this study were to determine the influence of midsole hardness and sole thickness of sports shoes on ball flex angle and position with increment of running velocity. The subjects employed for this study were 10 college students who did not have lower extremity injuries for the last one year and whose running pattern was rearfoot striker of normal foot. The shoes used in this study had 3 different midsole hardness of shore A 40, shore A 50, shore A 60 and 3 different sole thickness of 17cm, 19cm, 21cm. The subjects were asked to run at 3 different speed of 2.0m/sec, 3.5m/sec, 5.0m/sec and their motions were videotaped with 4 S-VHS video cameras and 2 high speed video cameras and simultaneously measured with a force platform. The following results were obtained after analysing and comparing the variables. Minimum angle of each ball flex position were increased with the increment of running velocity and shoe sole thickness(P<0.05), but mid-sole hardness did not affect minimum ball flex angle. The position which minimum angle was shown as smallest was 'D'. Midsole hardness and sole thickness did not affect time to each ball flex minimum angle, total angular displacement of ball flex angle, and total angular displacement of torsion angle(P<0.05). The position which minimum angle was appeared to be earliest was similar at walking velocity, and E and F of midfoot region at running velocity. Total angular displacement of ball flex position tended to increase as shifted to heel. It was found that running velocity had effects on ball flex angle variables, but shoe sole thickness partially affected. It would be considered that running velocity made differences between analysis variables at walking and running when designing shoes. Also, it was regarded that shoes would be developed at separated region, because ball flex angle and position was shown to be different at toe and heel region. It is necessary that midsole hardness and thickness required to functional shoes be analyzed in the further study.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2011년도 제42회 하계학술대회
• /
• pp.2077-2078
• /
• 2011

Now a days, the induction motor is widely used in industry automation. Without monitoring the motor fault, maintenance cost is increased undesirably high. The slip frequency is included in the feature frequency, so rotating rotor speed is needed. In this paper, a sensorless motor speed estimation method, rotor slot harmonic(RSH) method is suggested and a solution of rotor bar diagnosis is proposed for motor running with light-load. When the rotor is rotating, it shows the harmonic signal of back-emf voltage related with number of rotor slot. So from the power spectrum of current signal, we can find the rotor speed.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2003년도 춘계학술대회 논문집 전기기기 및 에너지변환시스템부문
• /
• pp.435-437
• /
• 2003

Recently, as the road capacity reaches the limit and environmental problems becomes serious, there is gradually increased a need for railroad vehicles that are environment-friendly and have time regularity, reliability and safety. Accordingly, in addition to conventional railroad vehicles, lots of vehicles are being newly developed. We developed the hardware and software of the measurement system for on-line test and evaluation of korean hish speed train. The software controls the hardware of the measurement data and acts as interface between users and the system hardware. In this paper, we is studied for electric apparatus performance of railway vehicle using sensor. In order to this test is developed signal conversion system. Using this system, we obtained important result for pantograph voltage, battery voltage, axle speed, and running speed.

• 대한토목학회논문집
• /
• 제33권5호
• /
• pp.2049-2056
• /
• 2013

정보통신의 발달로 정보화시대가 도래하면서 속도에 대한 인간의 욕구가 증가하고 있는 가운데, 교통분야에서도 이동성을 증대시키기 위한 초고속도로 건설에 대한 설계가 제기되고 있다. 본 연구는 설계속도가 120km/h를 초과하는 초고속도로 건설시 운전자가 설계속도의 수준으로 주행할 수 있는가를 분석하기 위한 연구를 수행하였다. 본 연구를 수행하기 위해서 설계속도가 상이하여 도로의 선형과 규격이 향상되면 운전자가 불안을 느끼는 주행속도도 증가하는지를 알아보았다. 실험은 피실험자 30명을 모집하여 뇌파분석기를 장착시킨 후 설계속도가 상이한 도로를 실제로 주행하고, simulator를 통해 가상으로 주행하면서 불안감을 느낄 때 발생하는 ${\beta}$파의 파워를 비교하였다. 이를 위한 실험구간은 강변북로(90km/h), 자유로(100km/h), 중앙고속도로(110km/h), 서해안고속도로(120km/h)로 선정하였다. 강변북로와 자유로는 주행속도가 80km/h - 130km/h, 중앙고속도로는 100km/h - 150km/h, 서해안고속도로는 110km/h - 160km/h 일 때의 불안뇌파 파워를 비교하였고, 시뮬레이션 주행은 일괄적으로 110km/h - 180km/h로 주행할 때 발생하는 불안뇌파 파워를 비교 분석하였다. 또한 paired t-test 검정을 통하여 불안뇌파가 증가하는 시점 속도를 통계적으로 검증하였다. 그 결과 시뮬레이션 주행 시 불안뇌파 증가시점의 속도는 실제 도로를 주행할 때 불안뇌파 증가시점보다 약 30km/h높게 나타났으며, 설계속도가 90km/h인 도로와 100km/h도로는 같은 속도에서 불안뇌파가 증가하여 도로의 선형과 규격에 차이가 적은 것으로 나타났다. 하지만 설계속도가 110km/h도로와 120km/h인 도로에서는 불안감을 느끼는 주행속도가 모두 증가하여 운전자는 도로의 선형과 규격이 향상됨에 따라 더 높은 속도로 주행할 수 있는 것으로 나타났다.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2008년도 춘계학술대회 논문집
• /
• pp.1227-1232
• /
• 2008

High-speed train of push-pull type called as G7 train has been developed and chosen as the model of KTX-II which will be operated on Honam Line nexr year. However, the EMU-type high-speed train appeared to be the recent trend that foreign markets have shown. Also, in the near future, a great number of new train sets are needed to accommodate the increased passengers in our country. Thus, development of the high-speed EMU was decided, planned, and started. In the development, included were almost all fundamental key technologies such as noise and vibration reduction in a passenger cabin, running characteristics, aerodynamic analysis, crashworthiness evaluation, EMI/EMC analysis, design of the cooling system for the propulsion control system, enhanced performance of transformer and switching converters, synchronous traction motor with permanent magnets, new design of front nose and ergonomic interiors, application of advanced information technology(IT) and smart sensors and the cost reduction of construction of railway bridges, etc. Each key technologies are carried out as sub-project independently but under the supervision of a project. The project will develop the high advanced level of technologies and provide necessary know-why's and support the team in charge of the development of the high-speed EMU, Hyundai Rotem Co. Ltd. The high-speed EMU will be successfully developed with the support of the project.

• 한국소음진동공학회논문집
• /
• 제22권4호
• /
• pp.307-317
• /
• 2012

The LRT(light rail transit) system, which has medium transport capacity between subway and bus is an advanced transportation system. It has many benefits like chap construction and operational cost down through driverless and flexible route planning. The rubber tired AGT(K-AGT) is a kind of LRT, which has rubber wheels and side guides. The side guides has many advantages, but brings vibration and noise problems from the friction between the guide rail and the wheels. This is the major source for the of passengers' discomfort. The purpose of this paper is to analyze dynamic characteries and running stability of the rubber tired AGT localization bogie if the AGT's speed is increased from 70 km/h to 80 km/h. The current design parameters of bogie suspension, as it is designed, was examined to satisfy the comfort index of the railway vehicle in performance test.

• 한국철도학회논문집
• /
• 제17권2호
• /
• pp.106-113
• /
• 2014

본 연구에서는 철도노선을 주행하는 열차의 성능과 노선의 선형정보를 이용하여 실용적인 철도노선의 선형 노후도 평가기법을 제안하였다. 일정한 성능의 열차가 직선 선로를 주행하는 시간을 기준으로 노선의 종단 및 평면 선형에 의하여 속도제한이 이루어지는 현황을 반영하여 늘어나는 주행시간을 비교하여, 시간의 함수로 정규화하여 노선의 선형에 따른 노후도 평가기법을 개발하였다. 본 기법은 통상적으로 차량운전성능시뮬레이션(Train Performance Simulation; TPS)을 이용하는 기법에 비하여 복잡한 차량성능 및 사양이 요구되지 않아 사용의 용이성이 확보되면서도 TPS 결과와 유사한 결과를 얻어 실용성 있는 평가가 가능할 것으로 판단된다.

• 복식문화연구
• /
• 제21권1호
• /
• pp.81-92
• /
• 2013

Many women feel pain in their breasts while running due to an excessively large degree of breast movement. Therefore, most sports bras pursue a reduction in breast movement. The purpose of this study is to investigate the breast movement reduction effect of a selection of sports bra designs according to the intensity of the sport and the breast size of the wearer. The study measured differences in the vertical movement of the nipple with 4 types of sports bras and 3 exercise speeds(4km/h, 7km/h, and 10km/h). Subjects included women in their 20s with bra sizes of either B cup(n=3) or C cup(n=3). The results of the study are as follows. Breast movement differed according to running speed and breast size; breast movement significantly increased starting with jogging speed(7km/h), and the C-cup group had a larger degree of vertical movement than the B-cup group. A superior effect on breast movement during jogging(7km/h) and sprinting(10km/h) was observed differently by bra cup sizes. To C-cup group, encapsulation-style sports bra, which provides horizontal support across the upper breast and padding inside the shoulder strap and bra cup to ease impact was most effective and next effective style was the compression-style bra with a princess line to cover the breasts solidly. Most style sports bra were effective in the B-cup group. Besides aforementioned encapsulation-style sports bra, the compression-style bra with a band, which presses the breasts against the chest wall, reduced breast movement effectively.