• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1990년도 봄 학술발표회 논문집
• /
• pp.66-71
• /
• 1990

The prediction and estimation of R/C structure behavior subjected to earthquake type loading is partly based on the experimental results of the monotonically increased cyclic loading, rather than that of the irregularly increased cyclic loading. However, actual earthquake is typical random vibration. In this respect, comparing and analysing experimental test results of R/C specimens subjected to monotonically increased cyclic loading and irregularly increased cyclic loading, this study proposes the research direction of irregularly increased cyclic loading during earthquake.

• 한국연초학회지
• /
• 제14권1호
• /
• pp.48-56
• /
• 1992

This studies were carried out to investigate the effects of leaf loading quantity and circulating air volume during bulk curing on the variation of physical and chemical characteristics in flue-cured tobacco. The results are as follows : 1. The content of sugar in cured leaves was decreased with more circulating air volume and leaf loading quantity at bulk curing. 2. Total nitrogen and protein nitrogen were decreased with less circulating air volume and more leaf loading quantity, while amino nitrogen was increased. 3. The contents of linolenic acid and linoleic acid were increased with more leaf loading quantity and oxalic acid and citric acid had a tendency of being increased in case of high circulating air volume. 4. In general, major aromatic compounds were increased through flue-curing. Relatively high content of solanone in case of lower air volume and less leaf loading were observed, while megastig matrienone was increased when leaf loading was small. 5. The more circulation air volume with leaf loading quantity caused lowering equilibrium moisture content and higher shatter index, which resulted in poor quality of cured leaves based on quality index, nitrogen number, taste index phillips index, and sugar-nicotine ratio.

• 대한추나의학회지
• /
• 제4권1호
• /
• pp.67-73
• /
• 2003

Objective: In order to study the effect of Taping Therapy for Increasing the weight loading on Affected Leg of Hemiparesis, a clinical study was performed. Method: Tapes were applied on gluteus medius and quadriceps femoris muscle. Weight loading on the Affected Leg of Hemiparesis was measured by two digital scales at before and after, after 30 minites, after 1 hour of treatment. From each score of two scales, we calculate the percentage of Weight loading on the Affected Leg of hemiparesis. Result: (1)Case 1: Only the percentage of Weight loading measured after treatment is effectively increased(from $47.38{\pm}0.99$ to $46.36{\pm}1.2$(p<0.05)) (2)Case 2: The percentage of Weight loading measured both after treatment and after 30 minute is effectively increased(the one is increased from $10.75{\pm}0.476$ to $12.04{\pm}1.717$ and the other is increased from $10.75{\pm}0.476$ to $15.09{\pm}2.454(p<0.05)$) (3)Case 3: The percentage of Weight loading measured at all times is effectively increased. (the one after treatment is increased from $31.59{\pm}0.606$ to $29.55{\pm}2.296$. the one after 30 minutes. is increased from $31.59{\pm}0.606$ to $45.40{\pm}0.86$, from the one after 1 hour is increased from $31.59{\pm}0.606$ to $52.70{\pm}0.541$(p<0.05)) Conclusion: (1)The percentage of Weight loading measured after treatment is effectively increased (2)The percentage of Weight loading measured after 30 minutes and 1 hour is effectively increased, so it means Taping Therapy is continueously effective. (3)The percentage of Weight loading is especialy increased when the Percentage of weight loading is near 30%

• 한국환경과학회지
• /
• 제31권12호
• /
• pp.1127-1134
• /
• 2022

Herein , the effect of changes in the organic loading rate in anaerobic digestion was evaluated. The experiment was carried out by a laboratory -scale semi-continuous stirred tank reactor, and feedstock was food-waste leached. The organic loading rate was increased by 0.5 kgVS/m3 in each phase from 1.0 kgVS/m3 to 4.0 kgVS/m3. At the end of the operation, to check the failure of the reactor, the organic loading rate was increased by 1.0 kgVS/m3 in each phase and reached 6.0 kgVS/m3. This shows that the biogas yield decreased as organic loading rate increased. Biogas production seemed to be unstable at 3.5-6.0 kgVS/m3. Moreover, biogas production dramatically fell to approximately 0 mL at 6.0 kgVS/m3, which was decided as the operation failure on the 16th day of the las tphase. The result of the reactor analysis shows that the cumulation of volatile fatty acid increased as the organic loading rate increased. This seems to occur due to the decreasein pH in the reactor and led to extinction of anaerobic bacteria, which were the biogas products. Although the buffer compound (alkalinity) could prevent the decline in pH, the concentration of alkalinity was found to be lacking at a high organic loading rate

• Elastomers and Composites
• /
• 제34권1호
• /
• pp.11-19
• /
• 1999

카본블랙 첨가량, 촉진제에 대한 황 함량비에 따른 가황고무의 점탄성 특성을 반발탄성, 저장 및 손실 모듈러스, tan ${\delta}$를 통하여 고찰하였다. 반발탄성은 촉진제에 대한 황 함량비가 낮을수록, 배합고무중 카본-블랙의 체적분율이 낮을수록 높게 나타났다. 저장 모듈러스는 카본블랙 첨가량과 변형이 증가할수록 감소하였으나, 가황시스템과는 무관하게 나타났다. 특히 카본블랙 첨가량이 낮은 수준 ($40{\sim}50phr$)에서는 변형이 3% 이상에서, 첨가량이 높은 수준(60phr 이상)에서는 변형이 6% 이상에서 일정한 저장 모듈러스를 보이고 있어 입자간에 형성되는 망상구조는 6% 이상의 변형에서 파괴됨을 알 수 있다. 손실 모듈러스는 카본블랙 첨가량이 낮은 수준에서는 별다른 영향이 없으나, 높은 수준에서는 1% 변형에서 최대값을 보인 후 완만히 감소하였다. Tan ${\delta}$는 가황시스템에 대한 의존성은 약하나 카본블랙 첨가량 및 변형이 증가함에 따라 증가하였으나, 카본블랙 첨가량에 관계없이 2% 변형에서 최대값을 나타내었다.

• Advances in concrete construction
• /
• 제4권4호
• /
• pp.319-332
• /
• 2016

In most cases strengthening reinforced concrete columns exposed to high strain rate is to be expected especially within weak designed structures. A special type of loading is instantaneous loading. Rapid loading can be observed in structural columns exposed to axial loads (e.g., caused by the weight of the upper floors during a vertical earthquake and loads caused by damage and collapse of upper floors and pillars of bridges).Subsequently, this study examines the behavior of reinforced concrete columns under rapid loading so as to understand patterns of failure mechanism, failure capacity and strain rate using finite element code. And examines the behavior of reinforced concrete columns at different support conditions and various loading rate, where the concrete columns were reinforced using various counts of FRP (Fiber Reinforcement Polymer) layers with different lengths. The results were compared against other experimental outcomes and the CEB-FIP formula code for considering the dynamic strength increasing factor for concrete materials. This study reveals that the finite element behavior and failure mode, where the results show that the bearing capacity increased with increasing the loading rate. CFRP layers increased the bearing capacity by 20% and also increased the strain capacity by 50% through confining the concrete.

• Geomechanics and Engineering
• /
• 제14권5호
• /
• pp.459-466
• /
• 2018

By conducting uniaxial loading cycle tests on the coal rock with outburst proneness, the dilatation characteristics at different loading rates were investigated. Under uniaxial loading and unloading, the lateral deformation of coal rock increased obviously before failure, leading to coal dilatation. Moreover, the post-unloading recovery of the lateral deformation was rather small, suggesting the onset of an accelerated failure. As the loading rate increased further, the ratio of the stress at the dilatation critical point to peak-intensity increased gradually, and the pre-peak volumetric deformation decreased with more severe post-peak damage. Based on the laboratory test results, the lateral deformation of the coals at different depths in the #1302 isolated coal pillars, Yangcheng Coal Mine, was monitored using wall rock displacement meter. The field monitoring result indicates that the coal lateral displacement went through various distinct stages: the lateral displacement of the coals at the depth of 2-6 m went through an "initial increase-stabilize-step up-plateau" series. When the coal wall of the working face was 24-18 m away from the measuring point, the coals in this region entered the accelerated failure stage; as the working face continued advancing, the lateral displacement of the coals at the depth over 6 m increased steadily, i.e., the coals in this region were in the stable failure stage.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2005년도 춘계학술대회 논문집
• /
• pp.593-597
• /
• 2005

It is generally accepted that fracture toughness of fiber-reinforced polymer composites is affected by loading rate in an atmospheric presure condition. For a present study, the loading rate effect on the fracture toughness of fiber-reinforced laminated composites in the hydrostatic pressure condition was investigated. For this purpose, fracture tests have been conducted using carbon/epoxy composites applying three steps of the strain rate at 270 MPa hydrostatic pressure condition. The loading rates applied were 0.05%/sec, 0.25%/sec, and 0.55%/sec. Fracture toughness was determined from the work factor approach as a function of applied loading rate. The result showed that fracture toughness decreased as the loading rate increased. Specifically, the fracture toughness decreased 12% as the loading rate increased from 0.05%/sec to 0.55%/sec.

• Steel and Composite Structures
• /
• 제39권3호
• /
• pp.229-241
• /
• 2021

This work focused on aluminum foam sandwich (AFS) with different foam core densities and different face-sheet thicknesses subjected to constant amplitude three-point bending cyclic loading to study its fatigue performance. The experiments were conducted out by a high frequency fatigue test machine named GPS-100. The experimental results showed that the fatigue life of AFS decreased with the increasing loading level and the structure was sensitive to cyclic loading, especially when the loading level was under 20%. S-N curves of nine groups of AFS specimens were obtained and the fatigue life of AFS followed three-parameter lognormal distribution well. AFS under low cyclic loading showed pronounced cyclic hardening and the static strength after fatigue test increased. For the same loading level, effects of foam core density and face-sheet thickness on the fatigue life of AFS structure were trade-off and for the same loading value, the fatigue life of AFS increased with aluminum foam core density or face-sheet thickness monotonously. Core shear was the main failure mode in the present study.

• 상하수도학회지
• /
• 제11권3호
• /
• pp.79-86
• /
• 1997

The characteristics of wastewater treatment according to operating condition of indirectly aerated fluidized bed filled with sand media were studied experimentally, and the obtained results were as follows; 1. During be operated under the BOD loading rate, $4.5kg-BOD/m^3{\cdot}day$, effluent SS according to the increase of recirulation velocities was gradually decreased. 2. According to the increase of media concentration, sludge convertion rate was gradually increased. 3. Under the same BOD loading rate, according to the increase of recirulation velocities, F/M ratio was gradually increased, however, sludge convertion rate was greatly decreased. On the other hand, inffluent BOD concentration has not an important effect. 4. Under the constant recirulation velocities, according to the increase of BOD loading rate, sludge convertion rate was gradually increased. 5. Under the same BOD loading rate, according to the increase of recirulation velocities, oxygen consumpion rate of microorgnism was gradually increased.