• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.67 no.2
• /
• pp.111-120
• /
• 2022

Improving flour quality is one of the major targets of wheat breeding programs. This study determined the optimum high-molecular-weight glutenin subunits (HMW-GS) to improve flour quality, and analyzed the correlation between agronomic and quality traits in Korea. A total of 180 wheat varieties, including 55 Korean and 125 foreign cultivars, carrying various Glu-1 alleles, were evaluated for their quality and agronomic traits. Results indicated that Glu-A1b, Glu-B1b, and Glu-D1f were the most prevailing alleles for each Glu-1 locus for Korean wheat cultivars. Korean wheat cultivars recorded shorter days to heading (DTH) and longer days to maturity (DTM) compared to foreign cultivars. In addition, an interaction effect was found between Glu-A1 and Glu-B1 alleles on several quality parameters. The combination of Glu-A1c and Glu-B1i showed a higher protein content, dry gluten content, and higher sodium dodecyl sulfate (SDS) sedimentation value than other Glu-A1×Glu-B1 combinations. Cultivars carrying Glu-A1a or Glu-A1b, Glu-B1i or Glu-B1al, and Glu-D1d for each Glu-1 locus exhibited a longer mixing time and stronger mixing tolerance. The DTM positively correlated with the protein content, gluten index and SDS sedimentation value. However, a negative correlation was observed between DTH and quality traits. Owing to the above results, this study suggests that an increase in the frequency of Glu-B1i or Glu-B1al, Glu-D1d coupled with a short DTH and long DTM could significantly improve wheat quality properties.

• Korean Journal of Remote Sensing
• /
• v.38 no.6_1
• /
• pp.1371-1383
• /
• 2022

In this study, the amount of coal waste dump was calculated using six Digital Elevation Models (DEMs) produced between 2006 and 2018 in Jangseong-dong, Taebaek-si, Gangwon-do, and the subsidence was observed by applying the Persistent Scatterer Interferometric SAR (PSInSAR) technique on the Sentinel-1 SAR images. As a result of depositing activities using DEMs, a total of 1,668,980 m³ of coal waste was deposited over a period of about 12 years from 2006 to 2018. The observed subsidence rate from PSInSAR was -32.3 mm/yr and -40.2 mm/yr from the ascending and descending orbits, respectively. As the thickness of the waste pile increased, the rate of subsidence increased, and the more recent the completion of the deposit, the faster the subsidence tended to occur. The subsidence rates from the ascending and descending orbits were converted to vertical and horizontal east-west components, and 22 random reference points were set to compare the subsidence rate, the waste rock thickness, and the time of depositing completion. As a result, the subsidence rate of the reference point tended to increase as the thickness of the waste became thicker, similar to the PSInSAR results in relation to the waste thickness. On the other hand, there was no clear correlation between the completion time of the deposits and the rate Of subsidence at the reference points. This is because the time of completion of the deposits at all but 5 of the 22 reference points was too biased in 2010 and the correlation analysis was meaningless. As in this study, the use of DEM and PSInSAR is expected to be an effective alternative to compensate for the lack of field data in the safety management of coal waste deposits.

• Journal of IKEEE
• /
• v.26 no.3
• /
• pp.408-415
• /
• 2022

In this paper, we propose a 3D point cloud reconstruction technique from 2D images using efficient feature map extraction network. The originality of the method proposed in this paper is as follows. First, we use a new feature map extraction network that is about 27% efficient than existing techniques in terms of memory. The proposed network does not reduce the size to the middle of the deep learning network, so important information required for 3D point cloud reconstruction is not lost. We solved the memory increase problem caused by the non-reduced image size by reducing the number of channels and by efficiently configuring the deep learning network to be shallow. Second, by preserving the high-resolution features of the 2D image, the accuracy can be further improved than that of the conventional technique. The feature map extracted from the non-reduced image contains more detailed information than the existing method, which can further improve the reconstruction accuracy of the 3D point cloud. Third, we use a divergence loss that does not require shooting information. The fact that not only the 2D image but also the shooting angle is required for learning, the dataset must contain detailed information and it is a disadvantage that makes it difficult to construct the dataset. In this paper, the accuracy of the reconstruction of the 3D point cloud can be increased by increasing the diversity of information through randomness without additional shooting information. In order to objectively evaluate the performance of the proposed method, using the ShapeNet dataset and using the same method as in the comparative papers, the CD value of the method proposed in this paper is 5.87, the EMD value is 5.81, and the FLOPs value is 2.9G. It was calculated. On the other hand, the lower the CD and EMD values, the better the accuracy of the reconstructed 3D point cloud approaches the original. In addition, the lower the number of FLOPs, the less memory is required for the deep learning network. Therefore, the CD, EMD, and FLOPs performance evaluation results of the proposed method showed about 27% improvement in memory and 6.3% in terms of accuracy compared to the methods in other papers, demonstrating objective performance.

• Journal of Korean Home Economics Education Association
• /
• v.34 no.3
• /
• pp.133-148
• /
• 2022

This study aims to explore the status and motives for using avatars and digital fashion items in the metaverse and to examine consumers' purchase satisfaction and future purchase intentions. We intend to provide implications for the development of avatars and fashion items, and the direction of the fashion industry and clothing education. For this purpose, the purchasing status, consumer motives for using avatars and digital fashion items, purchase satisfaction, and future purchase intentions were investigated, through a survey with 149 consumers aged 19 years or older, with the experience of using avatars. The results are as follows. First, the percentage of avatar ownership was high among women aged between 19 and 29, and those with low or high incomes. The younger group was more likely to make mobile phone purchases than the older group, and the older group was more likely to use credit cards. Even those respondents who owned avatars did not purchase frequently or spent a lot on items. On the other hand, in the case of fashion item purchases, the group spending more than 8,000 won was aged between 19 and 29, and the frequency and amount of purchases increased as income increase. Second, among the motives for using avatars and fashion items, the pursuit of pleasure had the greatest influence, and men paid more attention to self-expression through avatars than women. Third, the motive for vicarious satisfaction influenced purchase satisfaction, and the factors that influenced future purchase intention were vicarious satisfaction and stress relief. The results of this study suggests that avatars and fashion items should be developed considering factors that can relieve stress for all age groups, create a sense of unity among metaverse users, and provide satisfaction in a virtual world that is different from reality. In addition, education on how to use fashion items and consumption attitudes in education related to clothing life will be required.

• Korean Journal of Mineralogy and Petrology
• /
• v.35 no.3
• /
• pp.333-344
• /
• 2022

The quarrying and utilization of natural building stones such as granite and marble are rapidly emerging in developing countries. A huge amount of wastes is being generated during the processing, cutting and sizing of these stones to make them useable. These wastes are disposed of in the open environment and the toxic nature of these wastes negatively affects the environment and human health. The growth trend in the world stone industry was confirmed in output for 2019, increasing more than one percent and reaching a new peak of some 155 million tons, excluding quarry discards. Per-capita stone use rose to 268 square meters per thousand persons (m²/1,000 inh), from 266 the previous year and 177 in 2001. However, we have to take into consideration that the world's gross quarrying production was about 316 million tons (100%) in 2019; about 53% of that amount, however, is regarded as quarrying waste. With regards to the stone processing stage, we have noticed that the world production has reached 91.15 million tons (29%), and consequently this means that 63.35 million tons of stone-processing scraps is produced. Therefore, we can say that, on a global level, if the quantity of material extracted in the quarry is 100%, the total percentage of waste is about 71%. This raises a substantial problem from the environmental, economical and social point of view. There are essentially three ways of dealing with inorganic waste, namely, reuse, recycling, or disposal in landfills. Reuse and recycling are the preferred waste management methods that consider environmental sustainability and the opportunity to generate important economic returns. Although there are many possible applications for stone waste, they can be summarized into three main general applications, namely, fillers for binders, ceramic formulations, and environmental applications. The use of residual sludge for substrate production seems to be highly promising: the substrate can be used for quarry rehabilitation and in the rehabilitation of industrial sites. This new product (artificial soil) could be included in the list of the materials to use in addition to topsoil for civil works, railway embankments roundabouts and stone sludge wastes could be used for the neutralization of acidic soil to increase the yield. Stone waste is also possible to find several examples of studies for the recovery of mineral residues, including the extraction of metallic elements, and mineral components, the production of construction raw materials, power generation, building materials, and gas and water treatment.

• 한국노년학
• /
• v.40 no.4
• /
• pp.707-727
• /
• 2020

This study aims to empirically analyze the role that perception of the probability of lonely death among the elderly people living alone plays in the relationship between perceived social support and preference for institutional care based on Andersen's expanded Behavioral Model (2002). The subjects (n=676) of this study were the elderly people living alone, extracted from the "2018 Seoul Aging Survey." With "perceived social support" as an independent variable, "preference for institutional care" as a dependent variable, and "perception of the probability of lonely death" as a mediator variable, we conducted a Binary Logistic Regression to follow the three steps of analyzing mediation effect, as suggested by Baron and Kenny (1986). The results showed that perceived social support has a negative effect on the preference for institutional care and perception of the probability of lonely death among the elderly people living alone; at the same time, perception of the probability of lonely death was found to have a positive effect on their preference for institutional care. Lastly, perception of the probability of lonely death was found to partially mediate the effect of perceived social support among the elderly people living alone in terms of their preference for institutional care. Based on these findings, the practical implications of this study can be summarized as follows. First, various programs and support should be provided to the elderly people living alone in order to enhance the level of perceived social support, a factor that has been confirmed to increase preference for institutional care among the elderly people living alone. Second, as the perception of the probability of lonely death was confirmed to be a psychosocial factor of the preference for institutional care, we need to promote education and support for older people living alone to prepare them for lonely death. These efforts are expected to form a foundations for implementing a community-based integrated care system, "Aging in Place," which is the policy direction required for older people care.

• 한국노년학
• /
• v.41 no.2
• /
• pp.271-284
• /
• 2021

This study was conducted to derive factors that affect the satisfaction of home visiting health care services and to develop effective community care models by using the results of Seoul's outreach service which is the basis for Korean community care. The population of the study was the elderly aged 65 and 70 who participated in the Seoul's outreach community services 3rd stage (July 2017 - June 2018) and 4th stage (July 2018 to June 2019). 2,200 people were extracted by the proportional allocation method and home visit interviews were conducted on them. Subjects were divided into sub-groups based on chronic disease prevalence, and logistic regression was conducted to derive factors that affect the satisfaction of home visiting health care services. The results demonstrated that the elderly without chronic diseases were more satisfied when they received health education and counseling services, the elderly with one chronic disease were more satisfied when they received Community resource-linked services. In the case of elderly people with two or more chronic diseases, the service satisfaction level is increased when health condition assessment and Community resource-linked services are provided. Regardless of whether or not they have chronic diseases, service delivery time was a factor that increased satisfaction in home visiting health care. And the degree of explanation understanding was a factor that increased satisfaction for both single and complex chronic patients. Home Visiting health care services based on the community is a key component of the ongoing community care. In order to increase the sustainability and effectiveness of community care in the future, Community-oriented health care services based on the degree of chronic diseases of the elderly should be provided. In order to provide more effective services, however, it is necessary (1) to establish a linkage system to share health information of the subject held by the National Health Insurance Service to local governments and (2) to provide capacity-building education for visiting nurses to improve the quality of home visiting health care services. It is hoped that this study will be us ed as bas ic data for the successful settlement of community care.

• Journal of the Korean Orthopaedic Association
• /
• v.55 no.1
• /
• pp.71-77
• /
• 2020

Purpose: To determine if sparing the interspinous and supraspinous ligaments during posterior decompression for lumbar spinal stenosis is significant in preventing postoperative spinal instability. Materials and Methods: A total of 83 patients who underwent posterior decompression for lumbar spinal stenosis between March 2014 and March 2017 with a minimum one-year follow-up period, were studied retrospectively. The subjects were divided into two groups according to the type of surgery. Fifty-six patients who underwent posterior decompression by the port-hole technique were grouped as A, while 27 patients who underwent posterior decompression by a subtotal laminectomy grouped as B. To evaluate the clinical results, the Oswestry disability index (ODI), visual analogue scale (VAS) for both back pain (VAS-B) and radiating pain (VAS-R), and the walking distance of neurogenic intermittent claudication (NIC) were checked pre- and postoperatively, while simple radiographs of the lateral and flexion-extension view in the standing position were taken preoperatively and then every six months after to measure anteroposterior slippage (slip percentage), the difference in anteroposterior slippage between flexion and extension (dynamic slip percentage), angular displacement, and the difference in angular displacement between flexion and extension (dynamic angular displacement) to evaluate the radiological results. Results: The ODI (from 28.1 to 12.8 in group A, from 27.3 to 12.3 in group B), VAS-B (from 7.0 to 2.6 in group A, from 7.7 to 3.2 in group B), VAS-R (from 8.5 to 2.8 in group A, from 8.7 to 2.9 in group B), and walking distance of NIC (from 118.4 m to 1,496.2 m in group A, from 127.6 m to 1,481.6 m in group B) were improved in both groups. On the other hand, while the other radiologic results showed no differences, the dynamic angular displacement between both groups showed a significant difference postoperatively (group A from 6.2° to 6.7°, group B from 6.5° to 8.4°, p-value=0.019). Conclusion: Removal of the posterior ligaments, including the interspinous and supraspinous ligaments, during posterior decompression of lumbar spinal stenosis can cause a postoperative increase in dynamic angular displacement, which can be prevented by the port-hole technique, which spares these posterior ligaments.

• Journal of the Korean Orthopaedic Association
• /
• v.56 no.1
• /
• pp.42-50
• /
• 2021

Purpose: Periprosthetic fractures of a tumor prosthesis are rare but have difficulties in achieving sound fixation because of the poor bone quality, which increases the risk of loosening or re-fracture, even after bone union. A cortical strut onlay allograft was adopted for peri-prosthetic fractures after hip arthroplasty into the periprosthetic fracture of a tumor prosthesis, assuming that it would assist in firm fixation, shorten the time to union, and increase the bone stock, thereby, lower the chance of loosening and re-fracture. Materials and Methods: This study reviewed 27 patients (30 cases) of periprosthetic fracture of tumor prosthesis. Sixteen cases (allograft group) had augmentation with an onlay allograft, while 14 cases (conventional group) had internal fixation or conservative treatment. The following were assessed; mode of periprosthetic fracture, difference in the time to union between a strut cortical onlay allograft and without it, and survival of prosthesis, complication, and functional outcome between the two groups. Results: According to the unified classification system (UCS), 21 cases were type B (70.0%; B1, 14; B2, 1; B3, 6) and 9 cases were type C. The five-, 10-year survival of the 30 reconstructions by Kaplan-Meier plot was 84.5%±4.18% and 42.2%±7.83%, respectively. The average time to bone union of the entire cohort was 5.1 months (range, 2.0-11.2 months). The allograft group (3.5 months) showed a shorter period for union than the conventional group (7.2 months) (p<0.0001). All four cases of major complications occurred in the conventional group. Two cases with loosening and anterior angulation were treated with a change of prosthesis, and another with infection underwent amputation. The remaining case with loosening had conservative management. At the final follow-up, the average Musculosketal Tumor Society score of the allograft group (26.1) was better than that of the conventional group (20.9). Conclusion: Bone union in periprosthetic fractures of a tumor prosthesis can be achieved, but the minimization of complications is important. An onlay allograft facilitates firm fixation and increases the bone stock with a shortened time to union. This simple method can minimize the risk of loosening, joint contracture, and re-fracture.

• Journal of the Korean Orthopaedic Association
• /
• v.55 no.6
• /
• pp.495-502
• /
• 2020

Purpose: The aim of this study was to assess the effectiveness of domestically developed volar locking plate which has the concept of double-tiered subchondral support (DSS) in maintaining the reduction after distal radial fracture surgery. Materials and Methods: From July 2017 to December 2018, 54 patients were assessed. Plain radiographs were obtained immediately after surgery and at the last follow-up, and the radiographic parameters were measured in those images: radial length, radial inclination, volar tilt, ulnar variance, and distal dorsal cortical distance. The patients were subdivided into their age, type of fracture, and the position of the plate to evaluate the influence of each factors on the reduction maintenance. Results: Distal dorsal cortical distance in radiographs after the surgery was 5.91 mm (standard deviation, ±1.95 mm) on average. Significant differences in the radial length (p=0.038) and ulnar variance (p=0.001) were observed between immediately after surgery and at the last follow-up. When the parameters were evaluated by dividing the patients into subgroups according to the three specific factors, the ulnar variance showed a significant increase at the last follow-up when the patients were included 65-years-old or older. AO/OTA type C3 fracture, and Soong classification grade 0 plate position (p=0.007, p=0.012, p=0.046, respectively). Conclusion: Using the domestically developed DSS-type volar locking plate, significant reduction after distal radial fracture surgery could be maintained successfully. On the other hand, further study will be needed to determine about the reduction loss of the lunate facet identified in special cases that deal with fractures in elderly patients, unstable AO/OTA type C3 distal radial fractures, and Soong classification grade 0 plate position.