• Journal of Yeungnam Medical Science
• /
• v.5 no.2
• /
• pp.235-238
• /
• 1988

Duplication of the urethra within a single penile shaft is a rare anomaly. These can be divided into those that are in the sagittal plane, which is most common, and those that occur side by side. In some cases, the accessory channel is complete, having a separate bladder opening and no communication with the more normal ventral urethra. In other cases, the accessory urethra is incomplete, either ending blindly or communicating with the urethra distal to the bladder neck. We report on a 20-year-old male with incomplete double urethra.

• Journal of Welding and Joining
• /
• v.18 no.3
• /
• pp.68-75
• /
• 2000

The incomplete penetration(IP) discontinuity in butt joint weld, which is detected during safety analysis of the steel bridge by nondestructive evaluation(NDE) method, is classified as unacceptable defect according to the NDE codes and standards. In fact, there are a little allowance in butt joint weld in the view point of design criterion, and also detected IP discontinuity should be classified and evaluated for the fatigue strength and residual life estimation. In this study, we performed fatigue test to evaluate the fatigue strength of high strength steel(SWS490A) containing IP discontinuities in various size, the results compared and classified according to the bridge construction standard specification which published by korea administration of construction and traffic. Experimental results could be used to evaluate and estimate the IP discontinuities considering different stress range in butt joint bridge weld during periodic safety inspection.

• Journal of Institute of Control, Robotics and Systems
• /
• v.18 no.11
• /
• pp.1005-1010
• /
• 2012

We propose a novel approach to classify fingerprints using the extracted adaptive core block for improving classification performance of incomplete fingerprints in this paper. We compute representative directions from fingerprint images by the block unit and learn horizontal and vertical Markov models by deciding the center position of a fingerprint image based on the expert knowledge. The center block of a test image is the block has the highest probability after comparing the Markov model with $11{\times}11$ blocks. The proposed approach can effectively classify incomplete fingerprints using the optimal center block.

• Korean Journal of Cleft Lip And Palate
• /
• v.3 no.1
• /
• pp.33-36
• /
• 2000

Cornelia de Lange syndrome is a disorder of unknown biochemical and geneic basis that is recognized on the basis of characteristic facies(low anterior hairline, synophrys, anteverted nares, maxillary prognathism, long philtrum, carp mouth) in association with prenatal and postnatal growth retardation, mental retardation and, in many cases, upper limb anomalies. We treated the patient with incomplete cleft palate related to Cornelia de Lange syndrome.

• Communications for Statistical Applications and Methods
• /
• v.20 no.4
• /
• pp.283-290
• /
• 2013

Subjects can experience two types of recurrent events in a longitudinal study. In addition, there may exist intermittent dropouts that results in repeated observation gaps during which no recurrent events are observed. Therefore, theses periods are regarded as non-risk status. In this paper, we consider a special case where information on the observation gap is incomplete, that is, the termination time of observation gap is not available while the starting time is known. For a statistical inference, incomplete termination time is incorporated in terms of interval-censored data and estimated with two approaches. A shared frailty effect is also employed for the association between two recurrent events. An EM algorithm is applied to recover unknown termination times as well as frailty effect. We apply the suggested method to young drivers' convictions data with several suspensions.

• Structural Engineering and Mechanics
• /
• v.63 no.2
• /
• pp.251-257
• /
• 2017

A local damage identification method using measured structural static displacement is proposed in this study. Based on the residual force vector deduced from the static equilibrium equation, residual strain energy (RSE) is introduced, which can localize the damage in the element level. In the case of all the nodal displacements are used, the RSE can localize the true location of damage, while incomplete displacement measurements are used, some suspicious damaged elements can be found. A model updating method based on static displacement response sensitivity analysis is further utilized for accurate identification of damage location and extent. The proposed method is verified by two numerical examples. The results indicate that the proposed method is efficient for damage identification. The advantage of the proposed method is that only limited static displacement measurements are needed in the identification, thus it is easy for engineering application.

• Journal of Mechanical Science and Technology
• /
• v.17 no.5
• /
• pp.698-707
• /
• 2003

A new quadratic response surface modeling method is presented. In this method, the incomplete small composite design (ISCD) is newly proposed to .educe the number of experimental runs than that of the SCD. Unlike the SCD, the proposed ISCD always gives a unique design assessed on the number of factors, although it may induce the rank-deficiency in the normal equation. Thus, the singular value decomposition (SVD) is employed to solve the normal equation. Then, the duality theory is used to newly develop the conservative least squares fitting (CONFIT) method. This can directly control the ever- or the under-estimation behavior of the approximate functions. Finally, the performance of CONFIT is numerically shown by comparing its'conservativeness with that of conventional fitting method. Also, optimizing one practical design problem numerically shows the effectiveness of the sequential approximate optimization (SAO) combined with the proposed ISCD and CONFIT.

• Journal of the Korean Operations Research and Management Science Society
• /
• v.23 no.3
• /
• pp.63-73
• /
• 1998

The paper deals with interactive multiple criteria decision making procedure when decision maker (DM) specifies her or his preference in incomplete ways. Usually DM is willing or able to provide only incomplete information, because of time pressure and lack of knowledge or data. Under incomplete information on utility and attribute weight, the pairwise dominance checks result in strict or weak dominance values. Considering only strict dominance values sometimes fails to Prioritize alternatives because of fuzziness of preference information. Further there exists some information loss useful if used, otherwise. In this paper, we consider the outranking concept which implies the willingness of DM's taking some risk under the least favorable situation because she has enough reasons to admit the results. By comparing the magnitude of net preference degree of alternatives which is defined by difference between outrankings and outranked degree of each alternative, we can prioritize alternatives.

• Journal of the Korean Statistical Society
• /
• v.26 no.4
• /
• pp.493-505
• /
• 1997

The analysis of binary data appears to many areas such as statistics, biometrics and econometrics. In many cases, data are often collected in which some observations are incomplete. Assume that the missing covariates are missing at random and the responses are completely observed. A method to Bayesian analysis of the binary regression model with incomplete data is presented. In particular, the desired marginal posterior moments of regression parameter are obtained using Meterpolis algorithm (Metropolis et al. 1953) within Gibbs sampler (Gelfand and Smith, 1990). Also, we compare logit model with probit model using Bayes factor which is approximated by importance sampling method. One example is presented.

• Journal of Welding and Joining
• /
• v.19 no.2
• /
• pp.215-220
• /
• 2001

In the T-joint welding, the complete penetration joint which is obtained by groove welding with edge preparation is generally required thor the safety and reliability of structures but this way have the some defects such as increase of working time, consumed welding electrode quantity and large welding deformation. If there is no probrem, in the strength, T-joint welding without edge preparation will be profitably understood in the economical and welding deformation side. In this paper, we performed the finite element analysis to understand the characteristics of welding residual stresses on two models, complete penetration joint have the edge preparation and incomplete penetration joint without edge preparation, respectively. Especially, we observed the relation between welding residual stress distributed on the notch of gap in the root and external force in the incomplete penetration joint without edge preparation.