• 산업경영시스템학회지
• /
• 제27권1호
• /
• pp.74-78
• /
• 2004

Systems are often operated by not integration but blocking, i.e., non-standardization. The system blocking is mainly caused by non-standardization or incompatibility. The integrated system is effective, but researches for quantification of effectiveness from Integrating system are few. System blocking causes additional cost which is almost intangible and potential. In this paper we proposed a model to quantify the effectiveness of system integration. To verify the validity of proposed model, we applied the model for Korean information and communication industry and forecasted the cost of integration for South and North Korean telecommunication industry in the way of three scenarios.

• 한국자동차공학회논문집
• /
• 제17권5호
• /
• pp.133-139
• /
• 2009

When two cars impact each other, it is usually known smaller vehicle's passenger likely to be more seriously injured than bigger one's. Generally it is known that SUVs and Light Truck Vehicles (LTVs) are bigger and heavier than passenger vehicles and their drive height such as bumper rail and side member, and front end stiffness are higher than those of passenger vehicles. Because of these characteristics the occupants of passenger vehicle struck by SUVs or LTVs are more likely to experience severe injury or fatal injury. To evaluate SUV and LTV's aggressivity to passenger vehicle, SUV to passenger vehicle and LTV to passenger vehicle head-on crash test have been carried out. And finally the way how to reduce incompatibility between SUV and LTV and passenger vehicles is suggested.

• International Journal of Korean Welding Society
• /
• 제5권1호
• /
• pp.53-59
• /
• 2005

Auto industry has employed resistance spot welding(RSW) to join steel sheets for structural rigidity of automobile body. Driven by the need to reduce weight and fuel consumption, car companies have been evaluating aluminum intensive vehicles(AIVs) as a way to reduce vehicle weight without downsizing. During the transition from all steel-construction vehicle body to aluminum intensive body, joining aluminum to steel sheets emerges as a serious contender in automobile body. This paper deals with application of transition material to RSW aluminum to steel. Placing transition material insert between the aluminum/steel interface was found very effective to overcome physical incompatibility between aluminum and steel. Use of transition insert allows for two separate weld nuggets to be formed in their respective aluminum/aluminum and steel/steel interfaces. This RSW processes was monitored with the aid of dynamic resistance sampling. Typical patterns in sampled dynamic resistance curves indicated formation of sound nugget. The growth of two separate nuggets was examined by micro-cross section test.

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 2011년도 추계학술발표대회
• /
• pp.3.1-3.1
• /
• 2011

Nanoengineered materials with advanced architectures are critical building blocks to modulate conventional material properties or amplify interface behavior for enhanced device performance. While several techniques exist for creating one dimensional heterostructures, electrospinning has emerged as a versatile, scalable, and cost-effective method to synthesize ultra-long nanofibers with controlled diameter (a few nanometres to several micrometres) and composition. In addition, different morphologies (e.g., nano-webs, beaded or smooth cylindrical fibers, and nanoribbons) and structures (e.g., core-.shell, hollow, branched, helical and porous structures) can be readily obtained by controlling different processing parameters. Although various nanofibers including polymers, carbon, ceramics and metals have been synthesized using direct electrospinning or through post-spinning processes, limited works were reported on the compound semiconducting nanofibers because of incompatibility of precursors. In this work, we combined electrospinning and galvanic displacement reaction to demonstrate cost-effective high throughput fabrication of ultra-long hollow semiconducting chalcogen and chalcogenide nanofibers. This procedure exploits electrospinning to fabricate ultra-long sacrificial nanofibers with controlled dimensions, morphology, and crystal structures, providing a large material database to tune electrode potentials, thereby imparting control over the composition and shape of the nanostructures that evolved during galvanic displacement reaction.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1994년도 가을 학술발표회 논문집
• /
• pp.200-204
• /
• 1994

Low temperature associated damage mechanism is not well known for asphalt concrete. Many studies have related the thermal cracking of pavement in the roadway in cold region with overall shrinkage of the pavement surface under assumption of homogeneous material. This study, however, was intiated based on the assumption that thermal incompatibility of materials (heterogeneous) in asphalt concrete mixture would be the primary cause of the damages. Acoustic emission technique and microscopic obsevation were employed to evaluate damage mechanism of asphalt concrete due to low temperature. The first method showed the sufficient evidence that asphalt concrete could be damaged by lowered temperature only. The second method showed that the damage by temperature resulted in micro-cracks at the interface between asphalt matrix and aggregate particle. It was concluded that these damage mechanisms were the primary cause of major thermal cracking of asphalt pavement in cold region.

• 한국주거학회논문집
• /
• 제17권2호
• /
• pp.11-18
• /
• 2006

For the more comfortable thermal environment in residential buildings, it was necessary for variable components like as automatic flow limiting valves and/or balancing valves in hydronic system. And, these components had an effect on flow-rate and pressure inside pipe. In this case, the incompatibility between the design for the heating system and the selection of equipment was the causes of several problems in heating pipe network. In this study, we peformed measurements and analyses of flow rate and pressure inside pipe for radiant floor heating in residential buildings through field surveys and experiments in order to find out the actual conditions and problems. On the basis of this, we suggested the approach for the optimal flow-rate and pressure maintaining inside pipe in individual heating system.

• 한국실내디자인학회논문집
• /
• 제10호
• /
• pp.50-57
• /
• 1997

This study is concentrated on the specified relationship between the contemporary art and the interior design by investigation their situational connections through the expresison of their works. Each fields of modern art makes expressive situation more complicated and transforms its unintelligible and expressive outputs variously. The expression is the basis of the incompatibility of the modern art which features the ambivalence of the various tendency and the characteristics of the artists works as well as the disappearance of the typical genre of the art. The new expression such as the spatial recognition of the paintings and the participatio of the real, expreimental examples of the modern art enlarges its realm. The field interior design which has the close relationship with the fine arts need to make a new discussion or a theory among the progressive expression and the various tendencies of the art. Through this research, by reviewing the intermixed and expressed features of the artists works and designers projects which went far beyond the concepts and genre, the interrelationship between expression tendency of the contemporary art and the interior design has been specified.

• 한국자동차공학회논문집
• /
• 제15권5호
• /
• pp.72-77
• /
• 2007

Since 2000, sports utility vehicles(SUVs) occupy about 40% of domestic vehicle sales. As sports utility vehicle sales are increased the probability of crash accident between SUVs and passenger vehicles increases. Generally, SUVs are heavier than passenger vehicles and their drive height and front end stillness are higher than passenger vehicles. Because of these characteristics SUVs cause more severe injury and fatal injury in SUV to passenger vehicle head-on impact. To evaluate SUV's aggessivity to passenger vehicle, we carried out SUV to passenger vehicle head-on crash test. And finally the way how to reduce incompatibility between SUVs and passenger vehicles is suggested.

• Journal of Chest Surgery
• /
• 제29권3호
• /
• pp.322-325
• /
• 1996

ABO 부적합성 장기이식은 이미 존재하는 항체에 의한 초급성 및 급성 면역 거부반응 때문에 심장이식을 포함한 대부분의 장기이식에서 금기시 되어왔다. 그러나 ABO 부적합성 장기이식이 혈장교환, 항체흡착술, 면역억제, 비장절제술 등에 의해 성공적으로 치료되었다는 여러 보고가 나오고 있다. 우리는 혈장교환과 면역억제에 의한 ABO 부적합성 심장이식의 성공적인 치료를 경험했다. 그러나 이것이 ABO 부적합성 심장이식술을 정당화하는 것은 아니며, 계속되는 급성면역거부 반응이나 만기거부반응에 대한 ABO 부적합성의 관련이 충분히 알려지지 않았기 때문에 장기 추적검사가 요구된다.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2011년도 추계 학술논문 발표대회
• /
• pp.61-62
• /
• 2011

Construction plans for large construction projects are problems such as Incompatibility of information, omissions due to technical limitations of 2D CAD. In addition to, Plan established for the validation such as process, cost and construction technology plan is difficult. By occurring Frequent changes in the course of business, Inefficiency of management has occurred. In the construction process, there is occurred costs and construction delays due to reconstruction or communication error. In this study, It was deemed BIM will complement Existing 2D CAD problem. And, BIM case studies in the construction phase of domestic construction were analyzed, How to apply BIM in the construction phase investigated.