• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1995.04b
• /
• pp.39-44
• /
• 1995

The gas nitro-carburizing treatment with the merits of carburizing and nitriding treatment is recently applied to transmission gears. the shafls of an engine oil pump and steering shafls. For all that, the researches of the gas nitro-carburizing treatment are short of the fatigue behavior and the evaluation of fatigue life. In this paer, it is examined for the effect of inclusions and hole defects with fatigue limit and the evaluation of the fatigue strengthaccording tothe hardness and resifualstress with the specimen of a notro-carburizing treatment.

• Proceedings of the Korean Society of Soil and Groundwater Environment Conference
• /
• 2003.04a
• /
• pp.120-123
• /
• 2003

Immobilization behavior of methyl tert-butyl ether (MTBE) by various cyclodextrins(CDs) was studied to investigate the feasibility of MTBE removal using cyclodexrins. Even though MTBE has relatively low hydrophobicity and higher polarity compared to other organics, it was effectively immobilized by CDs. The immobilization isotherms was shown as a type of Freundlich isotherms, and the immobilization capacity of -CDs was the largest among natural COs. The initial apparent association constant for MTBE-CD complex follows the order : gamma = beta > methyl-beta > hydroxypropyl beta > alpha. These differences of the constants are related to the size of MTBE and CDs. The size of beta-CD and gamma-CD is large to encapsulate MTBE molecule into the cavity, which that of alpha-CB is too small to encapsulate MTBE.

• International Journal of Control, Automation, and Systems
• /
• v.2 no.4
• /
• pp.407-422
• /
• 2004

A new method for the design of predictive controllers for SISO systems is presented. The proposed technique allows uncertainties and constraints to be concluded in the design of the control law. The goal is to design, at each sample instant, a predictive feedback control law that minimizes a performance measure and guarantees of constraints are satisfied for a set of models that describes the system to be controlled. The predictive controller consists of a finite horizon parametric-optimization problem with an additional constraint over the manipulated variable behavior. This is an end-constraint based approach that ensures the exponential stability of the closed-loop system. The inclusion of this additional constraint, in the on-line optimization algorithm, enables robust stability properties to be demonstrated for the closed-loop system. This is the case even though constraints and disturbances are present. Finally, simulation results are presented using a nonlinear continuous stirred tank reactor model.

• Advances in nano research
• /
• v.8 no.2
• /
• pp.157-167
• /
• 2020

This paper studies forced vibrational behavior of porous nanocrystalline silicon nanoshells under radial dynamic loads using strain gradient theory (SGT). This type of material contains many pores inside it and also there are nano-size grains which define the material character. The formulation for nanocrystalline nanoshell is provided by first order shell theory and a numerical approach is used in order to solve nanoshell equations. SGT gives a scale factor related to stiffness hardening provided by nano-grains. For more accurate description of size effects due to nano-grains or nano-pore, their surface energy influences have been introduced. Surface energy of inclusion exhibit extraordinary influence on dynamic response of the nanoshell. Also, dynamic response of the nanoshell is affected by the scale of nano-grain and nano-pore.

• Steel and Composite Structures
• /
• v.33 no.4
• /
• pp.551-568
• /
• 2019

This proposed project presents the bi-axial and uni-axial stability behavior of laminated composite plates based on an original three variable "refined" plate theory. The important "novelty" of this theory is that besides the inclusion of a cubic distribution of transverse shear deformations across the thickness of the structure, it treats only three variables such as conventional plate theory (CPT) instead five as in the well-known theory of "first shear deformation" (FSDT) and theory of "higher order shear deformation" (HSDT). A "shear correction coefficient" is therefore not employed in the current formulation. The computed results are compared with those of the CPT, FSDT and exact 3D elasticity theory. Good agreement is demonstrated and proved for the present results with those of "HSDT" and elasticity theory.

• Health Policy and Management
• /
• v.4 no.1
• /
• pp.25-48
• /
• 1994

Noncompliance with treatment is a serious problem in the management of hypertension. We explored self-reported medication taking compliance behavior of 194 high blood pressure patients using modified health belief model hypothesizing interaction between model components. Data were collected from patients resistered hwachon community hypertension control program during February, 1993. Bivariate analysis showed perceived severity of complication, present symptom experience(p<0.05), perceived severity of hypertension and education leve(p<0.01) were significantly related to treatment experience. Logit analysis revealed that perceived severity of hypertension, perceived benefits of treatment, perceived barriers to treatment and interaction term between perceived severity of hypertension and perceived benefits of treatment contributed treatment experience. Health education from mass media was siglificantly related to continuity of treatment. We also concluded that the inclusion of interaction effects between health belief model components and the use of patient group as analysis unit lead to better study results.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.7 no.1
• /
• pp.53-76
• /
• 1979

During cosmetic treatments, SURFACTANTS penetrate into KERATINOUS TISSUES (hair, skin and nails). Whereas some of these surfactant molecules migrate to the vital tissues, a considerable fraction remains bound to the keratin. The extent of binding depends both on the nature of the head group and the length of the hydrophobic tail of the detergent molecules. In addition to entering the amorphous region of the keratin, some of the detergents also penetrate into the crystalline microfibrils and change their structures affecting their tensile properties. Owing to an uneven distribution of detergent molecules in the tissues, an anisotropy of the elastic moduli will occur, resulting in considerable internal stresses which, in rum, might lead to a deterioration of hair, skin and nails. The chemical behavior of keratins is also influenced by the presence of absorbed detergent in their structures. Depending on the detergents and the conditions, these effects can be either protective or detrimental. The deposition of detergent molecules into keratin can be enhanced or diminished by the inclusion of appropriate ingredients into the product formulae.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.35 no.9
• /
• pp.1119-1129
• /
• 2011

Shot-peening effects on the fatigue behavior of bearing steel were investigated under the high cyclic loading. Hourglass shape specimens were made of bearing steel(JIS-SUJ2) for rotary bending fatigue tests. Two kinds of treatments were performed : a heat treatment and a shot-peened surface treatment after the heat treatment. The fracture surfaces of specimens were classified into two types of fracture mode : the surface fracture mode induced by a surface defect and the internal fracture mode induced by a nonmetallic inclusion. Inclusion depth and shape affected considerably the fatigue life. Shot-peening treatment improved much the fatigue life of the bearing steel under low and high levels of cyclic loads. Probabilistic-stress-life (P-S-N) curves were suggested for the reliable fatigue life estimation of the improved bearing steel.

• Journal of the Mineralogical Society of Korea
• /
• v.19 no.3 s.49
• /
• pp.153-162
• /
• 2006

Fluid inclusions in amethyst from the Samcheonpo amethyst deposit of the Waryongsan area, Kyongnam generally grouped into four different types: Type I (liquid-rich and $10{\sim}23wt%$ NaCl, $Th=289{\sim}359^{\circ}C$), Type II (vapor-rich and $2{\sim}10wt%$ NaCl, $Th=304{\sim}365^{\circ}C;$), Type III (halite-bearing, $31{\sim}54wt%$ NaCl, $Th=259{\sim}510^{\circ}C;$), and Type IV ($CO_{2}-bearing\;9{\sim}13wt%\;NaCl,\;126{\sim}277^{\circ}$). Type I, II, and III inclusions are confined in the lower part of the amethyst and Type IV in the upper, which indicates significant hydrothermal activity during the earliest stage of the amethyst growth or the solidus condition of granitic rocks. The earliest fluid exsolved from the crystallizing granitic magma formed Type IIIa which is spatially associated with silicate melt inclusions. The homogenization behavior of Type IIIa inclusions by dissolution of the halite crystal after the bubble disappearance indicates that Type IIIa inclusions were trapped at some relatively elevated pressure. Exsolution of Type IIIb, I, II forming fluids with gradual decrease in their salinity was followed. The last fluid was $CO_{2}-bearing$ fluid (Type IV), which is assumed to be derived by decarbonization reactions with the surrounding sedimentary rocks. It suggests that the fine-grained granitic rocks containing the Samcheonpo amethyst crystallized at the sub-solvus condition saturated with water and exsolved abundant water.

• Analytical Science and Technology
• /
• v.11 no.3
• /
• pp.179-188
• /
• 1998

The capacity factor of fifteen phenol derivatives was determined with respect to the concentration of ${\alpha}$- or ${\beta}$-cyclodextrin [CD], the type as well as the content of organic solvent in the mobile phase, and the temperature. The effect of the inclusion complex formation between solutes and ${\alpha}$- or ${\beta}$-cyclodextrin on their retention and selectivity has been investigated. The inclusion effect of ${\beta}$-cyclodextrin was the most effective in aqueous methanol, whereas only a poor effect was observed in aqueous tetrahydrofuran and aqueous acetonitrile. A plot of the reciprocal of the capacity factor against $[CD]_T$ gives a straight line and the dissociation constant, $K_D$ of the inclusion complex can be calculated from the slope. It was possible to estimate the $k_D$ values in 100% water from a linear plot of $pK_D$ vs. water content in the solution by extrapolation. The separation factor, ${\alpha}$, of two compounds has been found to be affected not only by the $[CD]_T$ but also by their $K_D$ values. Under optimum conditions, some mixtures of phenol derivatives were able to separate successfully.