• Design & Manufacturing
• /
• v.17 no.1
• /
• pp.33-39
• /
• 2023

The ball end mill is a type of cutting tool that is widely used to process complex mold shapes including aspheric surfaces. Unlike the flat end mill in which the cutting edge is formed on the cylindrical handle, the cutting edge is formed from the cylindrical handle to the hemispherical shape, which is advantageous for processing curved shapes. However, since the cutting speed continuously changes during machining due to the helix angle of the cutting edge or the machining inclination angle, it is difficult to obtain a precise machined surface. Therefore, in this paper, machining was performed while changing the helix angle of the ball end mill and the angle of the machining slope under the same cutting conditions for STD 11 material, which is widely used as a mold material. Through this, the effect of the two variables on the roughness of the machined surface was analyzed. As a result, if the helix angle was 0 degrees, it showed the best surface roughness of Ra. 0.16 ㎛. When the helix angle was 20 degrees, the best surface roughness of Ra. 0.18 ㎛ was occurred.

• The korean journal of orthodontics
• /
• v.21 no.2 s.34
• /
• pp.367-397
• /
• 1991

This study was aimed to investigate the occlusal plane inclination in relation to the skeletal and dental assessment measurements in order to provide a reference in orthodontic treatment planning as the occlusal plane should be reconstructed orthodontically or gnathologically. The sample consisted of 73 normal occlusions and 113 malocclusions of adults. The computerized statistical analysis of 38 occlusal plane's and 29 skeletal and dental measurements were carried out with SPSS. The conclusions were as follows; 1 In normal occlusion, COP-NaPog was average $83.63^{\circ}$ (2.44) and occlusal plane inclination had a strong negative correlation with SNB and FH-NaPog. 2. In normal occlusion, ArANS plane was nearly parallel to the occlusal plane. 3. In malocclusion, the larger the mandibular plane angle and the shorter the ramus height was, the more downward the occlusal plane had a tendency to tip anteriorly. 4. Occlusal plane was more horizontal in deep bite group, while it was steeper in openbite group. 5. The curve of Spee was severe in deep bite group but in openbite group mandibular occlusal plane showed average reverse curvature, where it was found that the configuration of the occlusal plane contributed to the excess or deficiency of anterior overbite.

• Journal of Korean Association for Spatial Structures
• /
• v.16 no.1
• /
• pp.85-94
• /
• 2016

In this study, an acceleration sensor that has optical fibers to measure the inclination and acceleration of a structure through contradictory changes in two-component FBG sensors was examined. The proposed method was to ensure precise measurement through the unification of the deformation rate sensor and the angular displacement sensor. A high sensitivity three-axis accelerometer was designed and prepared using this method. To verify the accuracy of the accelerometer, the change in wavelength according to temperature and tension was tested. Then, the change in wavelength of the prepared accelerometer according to the sensor angle, and that of the sensor according to the change in ambient temperature were measured. According to the test results on the FBG-based vibration sensor that was developed using a high-speed vibrator, the range in measurement was 0.7 g or more, wavelength sensitivity, 2150 pm/g or more, and the change in wavelength change, $9.5pm/^{\circ}C$.

• Journal of applied mathematics & informatics
• /
• v.27 no.3_4
• /
• pp.703-714
• /
• 2009

GPS is especially suitable for location systems in flat areas, but the availability of GPS is limited in highly urbanized and mountain areas, due to the nature of satellite communications. Dead reckoning is generally used to solve a location problem when a pedestrian is out of range of GPS coverage. To extend the apparent coverage of the GPS system for a hiker in mountain areas, we propose an integrated 3D location system that interpolates a 3D dead reckoning system based on information about contour lines. The speeds of hikers vary according to the inclination of the ground in sloped areas such as mountains. To reduce location measurement errors, we determine the angle of inclination based on the contour lines of the mountain, and use the speeds based on the inclination in the location system. The simulation results show that the proposed system is more accurate than the existing location system.

• Fashion & Textile Research Journal
• /
• v.4 no.1
• /
• pp.71-78
• /
• 2002

The purpose of this study was to classify body types of 800 female junior and high school students based on factor analysis, cluster analysis, and correspondence analysis of 15 photometric measurements of the subjects' lateral body lines. The results are as follows: The skeleton structure, which was represented the back bending by the photometric measurement, was already formed at age of 12 or 13, while the cervical skeleton, the size and inclination of the shoulder, and the degree of the lateral inclination of the upper body and the buttocks continued to grow by the age of 16. A factor analysis of the photometric measurement resulted in the sampling which determined the degree of the back bending, front-bust angle, and lateral view as well as the sampling whose factor represented the cervical inclination. A cluster analysis of the photometric measurement resulted in the four types of classification: Type 1, the straight type comprising 13.3% of the whole population; Type 2, the bent-forward type comprising 39.5%; Type 3, the lean-back type comprising 27.4%; and Type 4, the swayback type comprising 19.1%. Accordingly, the bent-forward type was found to be the dominant type among the four lateral body types.

• Korean Journal of Applied Biomechanics
• /
• v.19 no.2
• /
• pp.187-196
• /
• 2009

The foot type is classified into normal, high or low arch according to either foot print or medial longitudinal arch (MLA) height. Plantar fasciitis, heel pain, Achilles tendinitis, stress fracture, metatarsalgia, knee pain, shin splint pain, and etc are common foot disorders and associate to the foot type. The purpose of this study was to evaluate several suggested bony inclination used to classified the abnormal foot and if the arch index (AI) was correlated with foot morphology. Lateral view and dorso-plantar view of radiographic images and flatbed scanner measurements obtained from 57 college students were analyzed. Results showed that AI measured in this study was higher than Caucasian Americans and European, but similar with African. The ethnic origin could influent the AI distribution. The AI provided a simple quantitative means of assessing the structure of lateral and medial longitudinal arches. The correlation coefficients of true bone height with AI could be further improved by normalized foot width rather than foot length. AI also demonstrated as a good indicator of inclination between calcaneus-fifth metatarsal (CalM5) and calcaneus-first metatarsal (CalX), it is a good means to classify the foot type.

• Advances in concrete construction
• /
• v.3 no.2
• /
• pp.127-143
• /
• 2015

Steel fibre reinforced concrete (SFRC) is an anisotropic material due to the random orientation of the fibres within the cement matrix. Fibres under different inclination angles provide different strength contribution of a given crack width. For that the pull-out response of inclined fibres is of great importance to understand SFRC behaviour, particularly in the case of fibres with hooked ends, which are the most widely used. The paper focuses on the numerical modelling of the pull-out response of this kind of fibres from high-strength cementitious matrix in order to study the effects of different inclination angles of the fibres to the load-displacement pull-out curves. The pull-out of the fibres is studied by means of accurate three-dimensional finite element models, which take into account the nonlinearities that are present in the physical model, such as the nonlinear bonding between the fibre and the matrix in the early stages of the loading, the unilateral contact between the fibre and the matrix, the friction at the contact areas, the plastification of the steel fibre and the plastification and cracking of the cementitious matrix. The bonding properties of the fibre-matrix interface considered in the numerical model are based on experimental results of pull-out tests on straight fibres.

• Geomechanics and Engineering
• /
• v.18 no.4
• /
• pp.363-371
• /
• 2019

In this study, the load carrying behavior of piled rafts installed in inclined bearing rock layer was investigated for rock-mounted and -socketed conditions. It was found that settlements induced for an inclined bearing rock layer are larger than for a horizontal layer condition. The load capacity of piled rafts for the rock-mounted condition decreased as rock-layer inclination angle (${\theta}$) increased, while vice versa for the rock-socketed condition. The load capacities of raft and piles both decreased with increasing ${\theta}$ for the rock-mounted condition. When bearing rock layer was inclined, loads carried by uphill-side piles were greater than those by downhill-side piles. The values of differential settlements of rock-mounted and -socketed conditions were not significantly different whereas slightly higher for the rock-socketed condition. The values of load sharing ratio (${\alpha}_p$) and its variation with settlement were not markedly changed by the inclination of bedrock. It was shown that ${\alpha}_p$ for piled rafts installed in rock layer was not affected by ${\theta}$ whereas actual loads carried by raft and piles may vary depending on the pile installation and rock-layer inclination conditions.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.22 no.6
• /
• pp.654-659
• /
• 2016

Recently, the passenger ship 'Sewol' capsized with an abrupt inclination while she was making a small angle alteration. It is very important to fully understand the concepts, causes and relevant corrections for a ship's transverse inclination, which is classified into heel, list and loll. In this study, the concept, development and calculation of loll were well considered and the actual magnitude of the angle of loll was simulated in a box-shaped model-ship experiment. The experimental values and its development according to different values of negative stability were compared with calculated values. In the results, experimental values for the angle of loll coincided closely with calculated values and the model inclined symmetrically on both port and starboard sides indicating an outstanding feature of loll. This study is expected to expand the concept of loll and help in the analysis of capsize incidents with unknown causes. Further experimental research or case studies concerning the risk of inappropriate correction for loll arising from misunderstandings will be needed.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.15 no.2 s.38
• /
• pp.139-150
• /
• 1991

The purpose of this study is to do the Somatotype classification according to the type of shoulder-neck and to give the thinkness of shoulder pad according to them. Therefore this study was measurement body size of 201 and the somatotypes were classified as their plumb line. The standard somatotype of this measurement was classified as 9 type according to its angle of shoulder inclination and neck length. Pads which have different thickness (1 cm, 1.5 cm, 2 cm) were attached to the 9 body type and the set-in sleeve blouse and raglan sleeve blouse were made and tring test and sensory test were accomplished. The results of this study were as follows: 1 . Classification of shoulder-neck relationship. Angles of shoulder inclination ($15^{\circ},\;21^{\circ},\;27^{\circ}$), lock lenaths (10 cm, 12.5 cm, 15 cm) were classi- fied as 3 type each and these types were combined as 9 types. II . The result of angle difference of shoulder inclination according to pad thickness. 1) In case of set-in pad. angle is increased $5.75^{\circ}$ per 1 cm of pad thickness. 2) In case of raglan pad. angle is increased $6.45^{\circ}$ per 1 cm of pad thickness. III. The most fit pad thickness to the 9 types. In case of set-in sleeve blouse. 1) High shoulder-long neck, Standard shoulder-long neck Low shoulder-long neck, Stan-dard shoulder·standard neck. Low shoulder-standard neck: 1.5 cm. 2) High shoulder-standard neck, Standard shoulder-short neck, Low shoulder-short neck: 1 cm. 3) High shoulder-short neck: 0 cm(without pad) In case of raglan sleeve blouse. 4) High shoulder-long neck, Standard shoulder-long neck, Low shoulder·long neck, Stan-dard shoulder-standard neck, Low shoulder-standard neck: 1.5 cm. 5) High shoulder-standard neck, Standard shoulder-short neck, Low-shoulder-short neck: 1 cm. 6) High shoulder-short neck: 0 cm(without pad)