• 대한치과교정학회지
• /
• 제29권4호
• /
• pp.399-409
• /
• 1999

본 연구는 교정치료동안의 전치부 후방이동에 의한 하안면부 연조직 측모 변화를 평가하기 위하여 시행되었다. 치조성 양악전돌을 주소로 내원하여 상, 하악 제 1 소구치를 발거하고 전치부 후방이동을 시행한 31증례의 치료전후 측모두부X선규격사진을 이용하였으며 성장의 영향을 배제하기 위하여 17세 이상의 한국인 여성으로 대상을 제한하였다. 치료전후 각 계측치와 변화량을 이용하여 paired f-test와 상관분석 및 회귀분석을 시행한 결과 다음과 같은 결론을 얻었다. $\cdot$치아의 후방이동량과 연조직의 후방이동량의 비는, 상악 중절치 (UIS):상순 (LS)은 1.54:1, 하악 중절치 (LIS):하순 (Ll)은 0.92:1이며 각각의 상관계수는 각각 0.746과 0.584로 나타났다. $\cdot$치료동안 연조직 자체의 두께는 상순 (UIS-LS)에서만 증가가 있었고 나머지 부위에서는 약간의 감소가 있었다. $\cdot$치아 이동량과 연조직 이동량간의 상관분석에서 상순 (LS)은 상악 중절치 (UIS)와 하순(LI)은 B점과 가장 높은 상관관계를 보였다. $\cdot$치아이동에 따른 하안면부 연조직의 이동을 예측하기 위한 다중 회귀방정식을 구할 수 있었다.

• Journal of Korean Dental Science
• /
• 제3권1호
• /
• pp.5-10
• /
• 2010

This study sought to compare the amounts of posterior anchorage loss during the en masse retraction of the upper anterior teeth between orthodontic mini-implant (OMI) and conventional anchorage reinforcement (CAR) such as headgear and/or transpalatal arch. The subjects were 52 adult female patients treated with sliding mechanics (MBT brackets, .022" slot, .019X.025" stainless steel wire, 3M-Unitek, Monrovia, CA, USA). They were allocated into Group 1 (N=24, Class I malocclusion (CI), upper and lower first premolar (UP1LP1) extraction, and CAR), Group 2 (N=15, Cl, UP1LP1 extraction and OMI), and Group 3 (N=13, Class II division 1 malocclusion, upper first and lower second premolar extraction, and OMI). Lateral cephalograms were taken before (T0) and after treatment (T1). A total of 11 anchorage variables were measured. Analysis of variance was used for statistical analysis. There was no significant difference in treatment duration and anchorage variables at T0 among the three groups. Groups 2 and 3 showed significantly larger retraction of the upper incisor edge (U1E-sag, 9.3mm:7.3mm, P<.05) and less posterior anchorage loss (U6M-sag, 0.7~0.9mm:2mm, P<.05; U6A-sag, 0.5mm:2mm, P<.01) than Group 1. The ratio of retraction amount of the upper incisor edge per 1 of anchorage loss in the upper molar made for the significant difference between Groups 1 and 2 (4.6mm:7.0mm, P<.05). Group 3 showed a relatively distal inclination of the upper molar (P<.05) and the intrusion of the upper incisor and first molar (U1E-ver, P<.05; U6F-ver, P<.05) compared to Groups 1 and 2. Although OMI could not shorten the treatment duration, it could provide better maximum posterior anchorage than CAR.

• 대한치과교정학회지
• /
• 제47권3호
• /
• pp.158-166
• /
• 2017

Objective: To investigate how bracket slot size affects the direction of maxillary anterior tooth movement when en-masse retraction is performed in sliding mechanics using an induction-heating typodont simulation system. Methods: An induction-heating typodont simulation system was designed based on the Calorific Machine system. The typodont included metal anterior and resin posterior teeth embedded in a sticky wax arch. Three bracket slot groups (0.018, 0.020, and 0.022 inch [in]) were tested. A retraction force of 250 g was applied in the posterior-superior direction. Results: In the anteroposterior direction, the cusp tip of the canine in the 0.020-in slot group moved more distally than in the 0.018-in slot group. In the vertical direction, all six anterior teeth were intruded in the 0.018-in slot group and extruded in the 0.020- and 0.022-in slot groups. The lateral incisor was significantly extruded in the 0.020- and 0.022-in slot groups. Significant differences in the crown linguoversion were found between the 0.018- and 0.020-in slot groups and 0.018- and 0.022-in slot groups for the central incisor and between the 0.018- and 0.022-in slot groups and 0.020- and 0.022-in slot groups for the canine. In the 0.018-in slot group, all anterior teeth showed crown mesial angulation. Significant differences were found between the 0.018- and 0.022-in slot groups for the lateral incisor and between the 0.018- and 0.020-in slot groups and 0.018- and 0.022-in slot groups for the canine. Conclusions: Use of 0.018-in slot brackets was effective for preventing extrusion and crown linguoversion of anterior teeth in sliding mechanics.

• 대한치과교정학회지
• /
• 제45권6호
• /
• pp.289-298
• /
• 2015

Objective: To evaluate and compare the effects of two appliances on the en masse retraction of the anterior teeth anchored by temporary skeletal anchorage devices (TSADs). Methods: The sample comprised 46 nongrowing hyperdivergent adult patients who planned to undergo upper first premolar extraction using lingual retractors. They were divided into three groups, based on the lingual appliance used: the C-lingual retractor (CLR) group (group 1, n = 16) and two antero-posterior lingual retractor (APLR) groups (n = 30, groups 2 and 3). The APLR group was divided by the posterior tube angulation; posterior tube parallel to the occlusal plane (group 2, n = 15) and distally tipped tube (group 3, n = 15). A retrospective clinical investigation of the skeletal, dental, and soft tissue relationships was performed using lateral cephalometric radiographs obtained pretreatment and post en masse retraction of the anterior teeth. Results: All groups achieved significant incisor and canine retraction. The upper posterior teeth did not drift significantly during the retraction period. The APLR group had less angulation change in the anterior dentition, compared to the CLR group. By changing the tube angulation in the APLR, the intrusive force significantly increased in the distally tipped tube of group 3 patients and remarkably reduced the occlusal plane angle. Conclusions: Compared to the CLR, the APLR provides better anterior torque control and canine tipping while achieving bodily translation. Furthermore, changing the tube angulation will affect the amount of incisor intrusion, even in patients with similar palatal vault depth, without the need for additional TSADs.

• 대한치과교정학회지
• /
• 제49권6호
• /
• pp.381-392
• /
• 2019

Objective: The objective of this two-arm parallel trial was to compare the type of tooth movement during en masse retraction of the maxillary anterior teeth using labial versus lingual biocreative therapy. Methods: Twenty-eight subjects were randomized in a 1 : 1 ratio to either the labial or lingual group. En masse anterior retraction was performed using labial biocreative therapy in group A and lingual biocreative therapy in group B. Cone beam computed tomography scans were taken before and after retraction and the primary outcome was the type of tooth movement during anterior retraction. Data were analyzed using paired t-tests for comparisons within each group and independent-sample t-test for comparison of the mean treatment changes between the two groups. Results: Significant differences were found between the two groups in relation to the type of tooth movement (labiolingual inclination of the central incisor; mean difference, $5.85{\pm}1.85^{\circ}$). The canine showed significant distal tipping in the lingual group (mean difference, $6.98{\pm}1.25^{\circ}$). The canine was significantly more intruded in the lingual group (mean difference, $1.67{\pm}0.49mm$). Good anchorage control and significant soft tissue changes occurred in both groups. No serious adverse effects were detected. Conclusions: With a 10-mm retraction hook, the labial biocreative technique with the reverse curve overlay provided anterior retraction with good torque control, while in the lingual group, anterior retraction occurred with controlled tipping movement with significant distal tipping and intrusion of the canine (trial registration: The trial was registered at ClinicalTrials.gov [NCT03239275]).

• 대한치과의사협회지
• /
• 제38권4호통권371호
• /
• pp.369-377
• /
• 2000

• 대한치과의사협회지
• /
• 제57권6호
• /
• pp.333-343
• /
• 2019

Many orthodontists face difficulties in aligning incisors in an esthetically critical position, because the individual perception of beauty fluctuates with time and trend. Temporary anchorage device (TAD) can aid in attaining this critical incisor position, which determines an attractive smile, the amount of incisor display, and lip contour. Borderline cases can be treated without extraction and the capricious minds of patients can be satisfied with regard to the incisor position through whole dentition distalization using TAD. Mild to moderate bimaxillary protrusion cases can be treated with TAD-driven en masse retraction without premolar extraction. Patients with Angle's Class III malocclusion can be the biggest beneficiaries because both sufficient maxillary incisal display, through intrusion of mandibular incisors, and distalization of the mandibular dentition are successfully achieved. In addition, TAD can be used to correct various other malocclusions, such as canting of the occlusal plane and dental/alveolus asymmetry.

• 대한치과교정학회지
• /
• 제4권1호
• /
• pp.21-29
• /
• 1974

The purpose of the present study is to evaluate changes of the soft tissue relative to underlying skeletal elements during orthodontic treatment, and the influence of orthodontic treatment quantitatively on various regions of the facial profile. 59 Korean young women were selected, whose Hellman dental age was IV A, IV C and V A. Lateral cephalometric head films were taken before and after orthodontic treatment. From tracings, landmarks on skeletal and soft tissue profile were located, and then their linear and angular measurements were made directly. The results were obtained as follow: 1) Soft tissues of the facial profile were closely related and dependent on the underlying dentoskeletal frameworks. Orthodontic treament resulted in the reduction of dentofacial protrusion with both upper and lower lips becoming less procumbent during treament. 2) Thickness of the upper lip increased considerably during orthodontic treatment, and this change was related to maxillary incisor retraction. The ratio between the amount of maxillary incisor retraction and that of increment of upper lip thickness was approximately 5:3. 3) Soft tissue thickness overlying Downs' point A, point B and pogonion was not modified by orthodontic treatment. 4) Holdaway's H line, relating facial profile to the underlying dentoskeletal framework, seemed to be the most practical approach to soft tissue analysis.

• 대한치과교정학회지
• /
• 제41권5호
• /
• pp.361-370
• /
• 2011

Objective: Speedy surgical orthodontics (SSO), an innovative orthodontic treatment, involves the application of orthopedic forces against temporary skeletal anchorage devices following perisegmental corticotomy to induce movement of specific dental segments. Herein, we report the biological effects of SSO on the teeth and periodontal structures. Methods: Five beagle dogs were divided into 2 groups and their 6 maxillary incisors were retracted $en$ $masse$ by applying 500 g orthopedic force against a single palatal mini-plate. Retraction was performed without and with perisegmental corticotomy in groups I and II, respectively. All animals were killed on the 70th day, and their periodontal structures were processed for histologic analyses and scanning electronic microscopy (SEM). The linear distance between the third maxillary incisor and canine was used as a benchmark to quantify the retraction amount. Results: Retraction was markedly faster and retraction amount greater in group II than in Group I. Surprisingly, Group II did not show any root resorption despite extensive retraction, while Group I showed prominent root surface irregularities. Similarly, SEM showed multiple resorption lacunae in Group I, but not in Group II. Conclusions: SSO is an effective and favorable orthodontic approach for major en masse retraction of the maxillary anterior teeth.

• 대한치과교정학회지
• /
• 제36권1호
• /
• pp.30-44
• /
• 2006

교정치료 영역에서 성인들의 심미적인 요구도가 증가되면서 설측 교정치료는 여러 가지 단점에도 불구하고, 가장 심미적이라는 이유로 많은 주목을 받아왔지만 실제 치아이동을 결정지을 수 있는 브라켓을 부착하는 기준평면의 위치에 대해서는 거의 보고된 바가 없다. 이에 본 연구는 실제 브라켓이 부착되는 평면의 상하 평행이동이나 기울기 변화에 따라 치아이동 양상이 어떻게 변화되는지 알아보고, 바람직한 전치부 치체이동을 얻기 위해서 힘의 적용점을 어디에 두어야 하는지, 그리고 전치부에 어느 정도의 모멘트를 부여해야 하는지 알아보고자 3차원 유한요소법을 이용하여 치아 변위 및 응력분포를 비교 분석하였다. 실험 결과 설측 브라켓 부착평면을 치은연쪽으로 평행이동 혹은 회전이동 시키고 견인하였을 경우, 절단연쪽으로 이동시켰을 때와 비교했을 때 비조절성 설측 경사이동이 감소하기는 하였으나 상하악 전치부 치아들의 설측경사 양상은 지속되었으며, 이러한 양상은 견치 브라켓의 hook 길이를 증가시켜도 계속 나타났다. 이와는 달리 설측 중심평면에 브라켓을 부착하고 각 치아별로 모멘트를 부여하였을 경우 설측 방향으로 개개 치아들의 치체이동이 발생하여 설측 교정치료 시 효과적인 전치부 치아의 후방견인이 가능함을 알 수 있었다.