• Geomechanics and Engineering
• /
• v.11 no.5
• /
• pp.657-670
• /
• 2016

The energy dissipation of coal under dynamic loads is a major issue in geomechanics and arising extensive concerns recently. In this study, dynamic loading tests of coal were conducted using a split Hopkinson pressure bar (SHPB) system, the characteristics of dynamic behavior and energy dissipation of coal were analyzed, and the mechanism of energy dissipation was discussed based on the fracture processes of coal under dynamic loads. Experimental results indicate that the energy dissipation of coal under dynamic loads has a positive linear correlation with both incident energy and dynamic compressive strength, and the correlation coefficients between incident energy, dynamic compressive strength and the energy dissipation rate are 0.74 and 0.98, respectively. Theoretical analysis demonstrates that higher level of stress leads to greater energy released during unstable crack propagation, thus resulting in larger energy dissipation rate of coal under dynamic loads. At last, a semi-empirical energy dissipation model is proposed for describing the positive relationship between dissipated energy and stress.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.20 no.1
• /
• pp.86-99
• /
• 2021

One of the methods to alleviate traffic congestion is to increase the efficiency of the roads by providing traffic condition information on road user and distributing the traffic. For this, reliability must be guaranteed, and quantitative real-time traffic speed prediction is essential. In this study, and based on analysis of traffic speed related to traffic conditions, historical data correlated with traffic flow were used as input. We developed an LSTM model that predicts speed in response to normal traffic conditions, along with a CNN-LSTM model that predicts speed in response to incidents. Through these models, we try to predict traffic speeds during the hour in five-minute intervals. As a result, predictions had an average error rate of 7.43km/h for normal traffic flows, and an error rate of 7.66km/h for traffic incident flows when there was an incident.

• Journal of the Korean Society of Safety
• /
• v.5 no.3
• /
• pp.27-32
• /
• 1990

Standardization of solar collector test method is desirable for improvement solar collector quality and Valuation of collector thermal performance. In the present work, test loop proposed by Chun, is modified for convenience of test and obtained accurate collector thermal performance. An experimental investigation hat been carried out with a modified collector test loop under a real sun condition in order to confirm the utility of modified test loop and study the effect of variation of flow rate on thermal efficiency, the range of optimum flow rate and critical incident angle.

• Quality Improvement in Health Care
• /
• v.9 no.2
• /
• pp.210-228
• /
• 2002

Background: The purpose of this research was to examine the fall incidence rate and its related factors of fall in inpatients. Methods: The data were collected from the 138 fall incident reports in one tertiary hospital in Seoul from April 1st 1999 to September 30th 2001. The Fall Incident Report Form was originally developed based on that of Massachusetts General Hospital revised in 1995. And this was modified for this survey by the collaborating work of QI team including researcher and department of nursing service of this particular hospital. The contents of Fall Incident Form were general characteristics of patient. factors related to fall. types and places of fall. circumstances, nursing interventions. and outcome. Results: 1) The incidence rate of fall was 0.08% of total discharged patients and 0.081 per 1000 patient-day. This incidence rate is much lower than that of several hospitals in USA. This finding might result from the different incidence report system of each hospital. 2) The characteristics of fall-prone patient were found as follows. They were mostly over 60 years old, in alert mental status, ambulatory with some assistance, and dependent on ambulatory device. The types of diseases related high incidence rate were cerebrovascular disease(3.2), hypertension(1.6), cardiovascular disease(1.4), diabetes(1.3) and liver disease(0.6). 3) The majority of fall events usually occurred m bed. bedside(walking or standing) and bathroom in patient room. Usually they were up on their own when they fell. And there were more falls of elderly occurred during night time than day or evening. 4) 63.8% of fall events resulted in physical injuries such as fracture and usually the patients had diagnostic procedures and some treatment(ex. suture) which caused additional cost to the patients and their families. 5) The found risk factors of fall were drugs(antihypertensive drug, diuretics) and environmental factors like too high bed height, long distance of bedside table and lamp switch, and slippery tile of bathroom floor. Conclusion: Considering these results, every medical and nursing staff should be aware of the risk factors of patients in hospital, and should intervene more actively the preventive managements, specially for the elderly patients during night. Therefore, it is recommended that the development of Fall Prevention Programs based on these results.

• Journal of the Korean Solar Energy Society
• /
• v.25 no.1
• /
• pp.19-25
• /
• 2005

All-glass evacuated tube solar collectors consist of glass evacuated tubes and absorber tubes. Solar thermal energy from the sun is transferred to the working fluid through the glass evacuated tube and the absorber tube. Several collectors which have different absorber tubes are tested to find the effects of the absorber tube shapes and the operating conditions such as the incident heat flux and the flow rate. As the results, the efficiency of the collector which has a finned tube U tube is about $2{\sim}5%$ higher than that of the others in all cases on an average. And the collector has a finned U tube has the highest efficiency at the high flow rate and the low incident heat flux. In this condition, the outlet mean temperature is low and the heat loss becomes small. Also, it is known that the fin effect is greater than the shade effect.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.8 no.2
• /
• pp.14-26
• /
• 2009

This study presented a novel method to estimate travel times under incident conditions. Predictive travel time information was defined and evaluated with the proposed method. The proposed method utilized individual vehicle speeds obtained from global positioning systems (GPS) and inter-vehicle communications(IVC) for more reliable real-time travel times. Individual vehicle trajectory data were extracted from microscopic traffic simulations using AIMSUN. Market penetration rates (MPR) and IVC ranges were explored with the accuracy of travel times. Relationship among travel time accuracy, IVC ranges, and MPR were further identified using regression analyses. The outcomes of this study would be useful to derive functional requirements associated with traffic information systems under forthcoming ubiquitous transportation environment

• Journal of Welding and Joining
• /
• v.20 no.4
• /
• pp.525-534
• /
• 2002

During laser spot welding of the braun tube electron gun, phenomena such as serious spattering and oxidative reaction, etc. were occurred. The spatter occurred from weld pool affects the braun tube, namely it blocks up a very small hole on the shadow mask and causes short circuit between two roles of the electron gun. We guessed that high power density and oxidative reaction are main sources of these problems. So, we studied to prevent and to reduce spatter occurring in spot welding of the braun tube electron gun using pulsed Nd:YAG laser. The characteristics of laser output power was estimated, and the loss of laser energy by optical parameter and spatter was measured by powermeter. The effects of welding parameters, laser defocused distance and incident angle, were investigated on the shape and penetration depth of the laser welded bead in flare and flange joints. From these results, the laser peak power was a major factor to control penetration depth and to occur spatter. It was found that the losses of laser energy by optic parameter and sticked spatter affect seriously laser weldability of thin sheets. The deepest penetration depth is gotten on focal position, and a "bead transition" occurred with a slight displacement of focal position relative to the workpiece surface and the absorption rate of the laser energy is affected by the shape factor of the workpiece. When we changed the incident angle of laser beam, the penetration depth was decreased a little with increasing of the incident angle, and the bead width was increased. The spattering was prevented by considering laser beam energy and incident angle.ent angle.

• The Korean Journal of Zoology
• /
• v.8 no.2
• /
• pp.37-41
• /
• 1965

The frequency and pattern of sex chromatin in primary cultured cells of kidney cortex of cats and guinea-pigs, and muscle of chick embroys were examined and compared to those of in vivo condition, with special reference to the various cultured stages. 1. In cat, the frequencies of sex chromatin positive I of peripheral position were average 62.7% in female, and 15% in male, whereas those of non-peripherla position were 5.8% in female and 0.1% in male. The incident proportion between them showed a marked difference-approximately 10 times higher in female than male. These results failry indicated that a distinct nuclear dimorphism with regard to the sex chromatin positive I was established in cultured cells. The position of sex chormatin was usually peripheral location. The tendency of frequencies , with reference to the cultured stages, was low count in primary extracted and initial stage cells , but it showed a peaked frequency in 10-13 days after primary culture, and after that the frequencies were decreased gradually. Compared between I vitro and in vivo condition of the same tissues, the cells in vivo exhibited the sex chromatin in high frequency at the peak showed stage. 2. In guinea-pig , the frequencyies of peripheral positive I were 36.8% in female and 6.3% in male, while non-peripheral positions were 6.1% in female and 3.5% inmale. Its incident was a rate of nearly 4 times higher in female than male. The nuclear dimorphism was also established in cultrued cells of guinea-pig. The position and the incident frquency showed a similar pattern as in cat except the primary extracted cells. 3. In chick embryo, the frequencies of sex chromatin positive I of peripheral position were 38.2% in female, and 18.3% in male, non-peripheral position, however, was hardly to find. These results suggest that the definite sexual dimorphism was unable to find in chick embryo cultured cells. The position and the incident tendency were a similar pattern as in above mammals and the frequency was higher in vitro cells.

• Journal of Ocean Engineering and Technology
• /
• v.28 no.3
• /
• pp.227-235
• /
• 2014

Using a 3-D numerical scheme (LES-WASS-3D) that considered wave-structure-sandy seabed interactions in a 3-D wave field, we analyzed the wave reflection and hydraulic characteristics inside a slit caisson with two chambers in a 3-D oblique wave field. To verify the 3-D numerical analysis method suggested in this study, we compared the numerical results with existing experimental results and found good agreement. The numerical analysis revealed that a standing wave field is generated on the front side of the slit caisson due to the effect of wave reflection. For incident waves propagating perpendicular to the slit caisson, the nodes and anti-nodes of the standing wave are apparent and symmetrical. However, in an oblique wave field, as the incident wave angle decreases, the nodes and anti-nodes of the standing wave become ambiguous and unsymmetrical. It was also found that the wave reflection coefficient decreases as the incident wave angle decreases. It can be pointed out that as the incident wave angle decreases, the turbulent intensity in the chamber increases. Thereby, the increased wave energy dissipation by the increased turbulent intensity reduces the rate of wave reflection. In addition, a strong turbulent intensity generally occurs in the first chamber.

• Safety and Health at Work
• /
• v.12 no.3
• /
• pp.390-395
• /
• 2021

Background: Health-care providers typically undergo shift work and are subjected to increased stress. Night shift work may induce disturbed sleep cycles and circadian rhythm. The objective of this study was to explore if night shift workers (NSWs) show an increased risk of abnormal thyroid-stimulating hormone (TSH). Methods: We conducted a retrospective cohort study of 574 employees without thyroid disease and abnormal TSH at baseline who underwent annual check-ups between 2007 and 2016 in a medical center. NSWs were defined as those with working time schedules other than daytime hours. We calculated the incidence rate and estimated the adjusted hazard ratio (HR) for incident abnormal TSH and subclinical hypothyroidism compared with non-NSWs using a Cox regression model. Results: A total of 56 incident abnormal TSH cases and 39 subclinical hypothyroidism cases in NSWs were identified during 3000 person-years of follow-up. In models adjusted for age, sex, obesity, and working departments, we found no increased relative risk for incident abnormal TSH (HR: 0.72, 95% confidence interval: 0.33-1.60) or subclinical hypothyroidism (HR: 0.52, 95% confidence interval: 0.19-1.45) when comparing NSWs to non-NSWs; nor were incidence rates significantly different among exclusively medical employees after excluding administrative staff. Conclusion: In this hospital-based nine-year follow-up retrospective cohort study, NSWs were not associated with increased relative risk of incident abnormal TSH and subclinical hypothyroidism, in contrast to previous cross-sectional studies.