• Proceedings of the Korean Society of Soil and Groundwater Environment Conference
• /
• 2005.04a
• /
• pp.389-392
• /
• 2005

Visual MODFLOW를 이용하여 서울지하철 7호선 706공구에 계획된 터널 굴착에 따른 지하수 유동계의 변화를 모사하였다. 경계조건은 모델 영역 내 하천(굴포천)의 경우 일정수두경계, 터널 굴착 구간의 경우 $0.39{\sim}0.58m^2/day$의 전도계수를 갖는 배수경계(Drain), 터널 개착구간은 Inactive cell이 존재하는 일정수두경계 조건으로 설정하였다. 모델 보정은 현장시험을 통해 구해진 수리상수는 일정하게 유지하고 함양률을 변화시키면서 실시하였으며, 정류모사를 반복 수행하여 최적의 함양률(150 mm/yr)을 결정하였다. 모사 결과 터널 구간으로의 지하수 유입량은 굴착 및 개착 완료 시 $623m^3/day$, 터널 완공 후 정류상태의 경우 $584m^3/day$인 것으로 나타났다. Zone Budget을 이용한 유출입량 분석 결과 정류 상태 시 터널 내로 유입되는 지하수의 69%는 터널 인근 하천수의 유입에 기인하며, 나머지 31%는 주변 지역에서 함양된 지하수에 의한 것으로 나타났다.

• Journal of the Korean GEO-environmental Society
• /
• v.25 no.5
• /
• pp.29-37
• /
• 2024

This study aimed to investigate the changes in chemical components that occur when weak clay is mixed with steel slag modified with calcium oxide, and to understand the expression characteristics of compressive strength according to hydrophilicity and curing time. XRF testing, SEM imaging, vane shear strength and uniaxial compressive strength testing were conducted. Calcium (Ca) released from the steel slag increases the Ca content in clay by increasing the number of crystal particles and forming a coating layer known as calcium silicate hydrate (CaO-SiO₂-H₂O) through chemical reactions with SiO₂ and Al₂O₃ components. The weak clay stabilized with steel slag is classified into an initial inactive zone where strength relatively does not increase and an activation zone where strength increases over curing time. The vane shear strength of the initial inactive area was found to be 4.4 to 18.4 kN/m² in the state of the weight mixing ratio Rss 30% (steel slag 30% + clay 70%). In the case of the active area, the maximum uniaxial compressive strength increased to 431.8 kN/m² after 480 hours of curing time, which increased due to the apparent adhesion strength of clay through pozzolanic reaction. Therefore, considering the strength expression characteristics of stabilized mixed clay based on the mixing ratio (Rss) during the recycling of steel slag can enhance its practicality in civil engineering sites.

• Journal of dental hygiene science
• /
• v.3 no.2
• /
• pp.67-70
• /
• 2003

The biological effects of the crude extracts from medicinal plants, Brachyglottis monroi and Trichocolea hatcheri were investigated. The crude ethanol extract inhibited the growth of the Gram positive bacterium Bacillus subtilis (ATCC 19659, 1 mm inhibition zone at $150{\mu}g/disc$) and the dermatophyte Trichophyton mentagrophytes (ATCC 28185, 6 mm inhibition zone at $150{\mu}g/disc$), and was toxic to P388 murine leukaemia cells ($IC_{50}$ $23.96{\mu}g/mL$ at $75{\mu}g/disc$). B. monroi ethanol extract showed stronger antiviral activity than that of T. hatcheri against Herpes simplex Type I virus (ATCC VR 733) and Polio Type I virus (Pfizer vaccine strain) (50% activity, @ 5 mg/ml at $150{\mu}g/disc$). The crude ethanol extract of T. hatcheri showed stronger antimicrobial activity than that of B. monroi. However, this extract was inactive against P388 murine leukaemia cells.

• The KSFM Journal of Fluid Machinery
• /
• v.7 no.3 s.24
• /
• pp.32-38
• /
• 2004

Shape of a multi-blades centrifugal fan is optimized by response surface method based on three-dimensional Navier-Stokes analysis. For numerical analysis, Reynolds-averaged Navier-Stokes equations with standard $k-{epsilon}$ turbulence model are transformed into non-orthogonal curvilinear coordinate system, and are discretized with finite volume approximations. Due to the large number of blades in this centrifugal fan, the flow inside of the fan is regarded as steady flow by introducing the impeller force models for economic calculations. Optimizations with and without constraints are carried out. Design variables, location of cur off, radius of cut off, expansion angle of scroll and width of impeller were selected to optimize the shapes of scroll and blades. Data points for response evaluations were selected by D-optimal design, and linear programming method was used for the optimization on the response surface. As a main result of the optimization, the efficiency was successfully improved. The correlation of efficiency with relative size of inactive zone at the exit of impeller is discussed as well as with average momentum fluxes in the scroll.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.12 no.3
• /
• pp.457-465
• /
• 1988

The inside contact characteristics in abrasive belt drives were investigated analytically and experimentally for (1) driver pulley contact wheel and (2) driven pulley contact wheel. The concentrated contact forces in the grinding zone divided the entire belt-pulley contact are by three distinct areas and the tangential friction forces in the active areas caused the normal forces to change, which resulted in the different belt force distribution compared with those of the ordinary flat belt drives. The experimental results for the normal pressure (belt tension) distribution were in good agreement with the theoretical results.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.23 no.5
• /
• pp.646-652
• /
• 1999

Detailed characteristics of the mean flow field inside the rotor of a multiblade fan with scroll are presented in this paper by measurements and visualizations. The measurements were taken with a five-hole probe and conformed by smoke test. How field is distinguished clearly in 3 regions with respect to the flow directions. The first region is near the exit of scroll where the fluid flows the opposite direction to the rotation of rotor. The second is opposite side of the scroll exit where the fluid flows the same direction to the rotation of rotor. The third is the region where the fluid flows toward the blades directly with the largest values comparatively. The strongest recirculation is happened in the second region, and the weakest one is in the third region. This complex configuration makes the flow field highly non-uniform and may cause to generate a noise and ineffective flow efficiency.

• 유체기계공업학회:학술대회논문집
• /
• 2003.12a
• /
• pp.385-390
• /
• 2003

Shape of a multi-blades centrifugal fan is optimized by response surface method based on three-dimensional Navier-Stokes analysis. For numerical analysis, Reynolds-averaged Wavier-Stokes equations with standard $k-{\varepsilon}$ turbulence model are transformed into non-orthogonal curvilinear coordinate system, and are discretized with finite volume approximations. Due to the large number of blades in this centrifugal fan, the flow inside of the fan is regarded as steady flow by introducing the impeller force models for economic calculations. Optimizations with and without constraints are carried out. Design variables, location of cur off, radius of cut off, expansion angle of scroll and width of impeller were selected to optimize the shapes of scroll and blades. Data points for response evaluations were selected by D-optimal design, and linear programming method was used for the optimization on the response surface. As a main result of the optimization, the efficiency was successfully improved. The correlation of efficiency with relative size of inactive zone at the exit of impeller is discussed as well as with average momentum fluxes in the scroll.

• Fisheries and Aquatic Sciences
• /
• v.1 no.1
• /
• pp.82-93
• /
• 1998

Monthly changes of the gonad follicle index (GFI), reproductive cycle, egg-diameter composition, first sexual maturity of the Pacific oyster, Crassostrea gigas, were studied based on the samples which have been collected from the intertidal zone of Poryong west coast of Korea, from January to December, 1996. C. gigas, is dioecious, while a few individuals are alternatively hermaphroditic. Monthly variation of gonad follicle index (GFI) used for determination of spawning period, coincided with the reproductive cycle. GFI increased from April when seawater temperatures gradually increased and reached the maximum in May. And then, GFI sharply decreased from June to September due to spawning. Reproductive cycle of this species can be divided into five successive stages: in females, early active stage (March to April), late active stage (April to May), ripe stage (May to August), partially spawned stage (June to September) and spent/inactive stage (September to February); in males, early active stage (February to March), late active stage (April to May), ripe stage (May to September), partially spawned stage (June to September) and spent/ inactive stage (September to February). The diameter of fully mature eggs are approximately 50um. Spawning occurred from June to September, and two spawning peaks were observed in June and August when the seawater temperature was above $20^{\circ}C$. Percentages of the first sexual maturity of males of 20.1-25.0 mm in shell height were over $50\%$, while those of females of 25.1-30.0 mm in shell height were over $50\%$. All the males of > 30.1 mm and all the females of ^gt; 35.1 mm completed their first sexual maturity. The results suggest that C. gigas has a protandry phenomenon. Sex ratios of 919 oysters observed were 453 females $(49.29\%)$, 429 males $(46.68\%)$, 16 hermaphrodites $(1.74\%)$, and 21 indeterminate individuals $(2.29\%)$. In age class I, sex ratio of males were $64.00\%$, thus, a higher percentage than that of females. It was noted that $64.00\%$ of the young males (age class I) were more functional than females in age class I, but 2-3 year-old oysters showed higher percentage of females. Percentages of hemaphrodites in 2-3 year classes were relatively higher than those in other year classes. Histological pattern of hermaphrodites can be divided into two types: Type I (hermaphrodite having a number of newly formed developing oocytes on the oogenic tissues within a degenerating spermatogenic follicle after discharge of numerous spermatozoa) and Type II (hermaphrodite having two separate follicles in the same gonad).

• Journal of the Korean earth science society
• /
• v.18 no.6
• /
• pp.559-564
• /
• 1997

The New Hebrides Basin is an inactive non back-arc basin located at the convergent boundary of the Pacific and Info-Australian plates. This basin was formed from 46 Ma to 60 Ma. The basin has two spreading episodes with rates of 34 mm/a for 42 to 47 Ma and 17 mm/a for 47 to 60 Ma. The sediments covered in the basin has uniform thickness of 0.65 sec. The age-depth correlation curve of the New Hebrides Basin can be represented by the following equation: $Depth(m)=2689+312\sqrt{Age}(Ma)$ The coefficient of 312 in this equation is close to that for major oceans, 350. This suggests that the cooling processes of the lithospheres in the New Hebrides Basin and major oceans are similar to each other. Free-air gravity anomalies of the basin varying from -22.3 mgal to +59.0 mgal. The mean value is +30.2 mgal higher than those of the normal oceans. Moderately large free-air gravity anomalies in the New Hebrides Basin are presumably owing to its location on a marginal swell along the New Hebrides Trench. It is generally observed that the ocean floor is very gently uplifted in a zone about 200 km oceanward of the trench axis. Positive free-air gravity anomalies amounting to $50{\sim}60$ mgal are usually observed on the crest of the swell. This topography is presumably by bending of the oceanic lithosphere so as to dynamically maintain nonisostatic states for some duration.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.19 no.3
• /
• pp.265-286
• /
• 1997

Bone morphogenetic proteins(BMPs) are a group of transforming growth factor beta(TGF-${\beta}$)-related factors and multifunctional proteins, especially the only known biologic factors capable of inducing endochondral bone formation at an extraskeletal site. This study was performed to investigate the effect of the partially purified porcine BMP(pBMP) at an ectopic site. PBMP was partially purified from porcine bone matrix and its activity was monitored by an in vivo bioassay. The purification method utilized extraction of the bone-inducing activity with 4M guanidine, followed by chromatography on heparin-Sepharose. Active fractions were assayed by sodium dodecyl sulfate-polyacrylamide gel electrophoresis. And the fractions were reconstituted with inactive insoluble collagenous bone matrix from rats, acid soluble type I collagen from rat tail and chondroitin-6-sulfate sodium salt and implanted into the pectroralis muscle pouches of Sprague-Dawley rats. And the carrier complex was implanted on the opposite side as control. The rats were sacrificed at the day of 1st, 3rd, 5th, 7th, 11th, 14th and 21st after implantation and examined histologically, radiologically and biochemically. And alkaline phosphatase activity and calcium content were used as indices of bone formation. The results were as follows ; 1. Active fractions were localized in a zone between 31 and 40 KDa on SDS-PAGE. 2. The implanted 3.0mg of the partially purified pBMP induced cartilage and bone in the muscle tissue of rats through an endochondral ossification process. 3. Inactive insoluble bone matrix, type I collagen and chondroitin-6-sulfate have functioned as carriers for pBMP, but revealed some foreign body reactions. 4. Soft X-ray didn't reveal significant change between the experimental and the control group. 5. The alkaline phosphatase activities in the experimental group of 5th, 7th, 11th, 14th and 21st were increased significantly compared with control (p<0.01) with the peak in the group of 11th day. 6. With time, the calcium content of the experimental group increased. And the calcium contents in the experimental group of 11th, 14th and 21st were increased significantly compared with control (p<0.01).