• Korean Journal of Agricultural Science
• /
• v.14 no.1
• /
• pp.1-15
• /
• 1987

This experiment was conducted to investigate the effect of nitrogen top-dressing and Jangyeopkong was planted under two different seeding time (single cropping-May 15, after barley cropping-June 18), four levels of nitrogen top-dressing (0, 3, 6, 9 kg/10a) and two times of nitrogen top-dressing (Hilling time, Flowering Time). The results obtained are summarized as follow: 1. The days to flowering and maturity were delayed a day longer in hilling times than flowering times of nitrogen top-dressing. 2. The number of nodes of main stem and length of internodes didn't show significance among treatments. But, the number of nodes of branches was much higher when the soybean was planted on May 15, and were higher hilling time than flowering time as the amount of nitrogen top-dressing increased. Especially, the number of nodes of branches was high when 6kg of nitrogen was applied during hilling time. 3. The fresh and dry weight of stem and leaves at 10, 25 and 40 days after flowering were increased by increasing the amount of nitrogen top-dressing. More apparent effect of nitrogen was attained high significant when nitrogen was applied at the time of hilling rather than flowering time. 4. The number and fresh weight of nodule, and dry weight were apparently decreased after barley and were decreased according to the increasing the amount of nitrogen top dressing. The degrees of decreasing was more apparent in the hilling time than in the flowering time. 5. The number of pods per plant, and number and weight of grain per plant were higher when the soybean was planted on May 15, the amount of top dressing increased and hilling time rather than flowering time. Especially, yield component were highest when 6kg of nitrogen was applied during hilling time. Also, the grain yield per 10a showed high significance among treatment, and were high when 6kg of nitrogen was applied during hilling time.

• Management & Information Systems Review
• /
• v.35 no.2
• /
• pp.67-81
• /
• 2016

The purpose of this study was to investigate lots of problems that the current tax appeal system has, which are becoming serious issues as tax appeal cases are recently increasing. Those problems include the unreasonable procedure and period of deliberation on tax appeal cases, permission of a same tax appeal by more than one governmental agencies and the compulsory transposition system of tax appeal cases. All of these problems should be rectified in order to ensure that the currently tax appeal system protect taxpayers' rights and interests effectively. According to the current tax appeal system, the period from the receipt of tax appeal cases to ruling on them is up to 90 days. This is unrealistic, so that period should be allowed to be extended if those cases about more complicated taxation or if they are even harder to be treated for any reason. At present, chief of Tax Tribunal has to unconditionally accept resolution from the meeting of tax judges and make a ruling accordingly because he has no right to reject that resolution. But now, it's time to establish legal grounds based on which the chief suggests the tax judges to reconsider their resolution if it is undoubtedly wrong. Currently, there's a relatively little acceptance of tax appeals from people who can't financially afford to designate a proxy for them. To solve this problem, lots of efforts to make socially recognized the necessity to relive those people's rights and interests and make widely known the Public Proxy of Tax Appeal System. The current tax appeal system allows the Board of Audit and Inspection to be an appealer. This means taxation may be deliberated on by more than one governmental agencies. It is so inefficient. Therefore, tax appeal by the board should be only about taxation that they found unacceptable by audit and inspection. Except for this, it is not allowed that the Board of Audit and Inspection file tax appeals that are, in turn, necessarily transported to the National Taxation. Esecially, the transposition should be a procedure that is occasionally taken. In sum, this study investigated problems with the current tax appeal system, and made suggestions about solutions that are not theoretical but practical.

• Journal of dental hygiene science
• /
• v.10 no.4
• /
• pp.219-225
• /
• 2010

The purpose of this study was to examine the patients' knowledge and expectation of dental implants and to provide effective consulting and accurate information on implants to them. To that end, between March 23, 2008 and June 5, 2008, patients who were visiting dental clinics (hospitals) in Seoul, Gyeonggi-do, and Incheon areas were surveyed. 84.7% of subjects said that they recognized implants, and the largest number of them (26.7%) of subjects came to know via friends. According to an analysis of subjects' knowledge of the dental implant operation, the maximum value was 4.06, and the minimum value was 3.05. The opinion value on the need to have regular examination after the implant operation was highest at 4.06. Regarding expectation over the implant operation, the maximum value was 4.42, and the minimum value was 1.78. The opinion value on considering the implant operation capability the most important was the highest at 4.42. The relationship between the knowledge of and expectation over implants was significant. By gender, females had a significantly higher level of knowledge than males. Regarding preference, females scored 3.27 points, and males scored 3.23 points. By occupation, professionals earned the highest score of 3.55 in knowledge, and professionals earned the highest score of 3.31 in expectation. According to an analysis of the relation between variables of knowledge of and variables of expectation over implants, the correlation coefficient (r) between the two factors was 0.362, indicating a positive relevancy(+)(p<.01).

• Journal of Yeungnam Medical Science
• /
• v.2 no.1
• /
• pp.203-210
• /
• 1985

Febrile morbidity after cesarean section is one of the major problems in obstetric practice. This morbidity is most often due to endometritis. Although parenteral prophylactic antibiotics or antibiotic irrigation has been reported to reduce the incidence of endometritis after cesarean section, its incidence remains high. Among the patients who were undergoing cesarean section at Yeungnam University Hospital from the beginning of March, 1985, three group were evaluated in the orders. 1) 30 cases as intrauterine irrigation group with cephradine solution, 2) 35 cases as intravenous injection group with cephradine, 3) 35 cases as control group are neither irrigated nor injected. Febrile morbidity was also evaluated by means of a fever index. The incidence of clinically diagnosed endometritis in the three group were 6.7%, 2.9%, and 22.9%. As these results, two study groups were markedly reduced the incidence of endometritis than control group. There was no significant difference between the intrauterine irrigation with cephradine and control, but significant difference between the intravenous cephradine injection and control (P<0.05). With the results of fever index analysis, both prophylactic intrauterine irrigation and intravenous injection markedly reduce the incidence of endometritis after cesarean section with stastical significance (P<0.05), and also markedly reduce the febrile degree.

• Journal of the Society of Naval Architects of Korea
• /
• v.28 no.2
• /
• pp.52-68
• /
• 1991

A new propeller series is developed using the newly developed blade section(KH18 section) which behaves better cavitation characteristics and higher lift-drag ratio at wide range of angle-of-attack. The pitch and camber distributions are disigned in order to have the same radial and chordwise loading distribution with the selected circumferentially averaged wake input. Since the geometries of the series propeller, such as chord length, thickness, skew and rate distribations, are selected by regression of the recent full scale propeller geometric data, the performance prediction of a propeller at preliminary design stage can be mure realistic. Number of blades of the series propellers is 4 and the expanded blade area ratios are 0.3, 0.45, 0.6 and 0.75. Mean pitch ratios are selected as 0.5, 0.65, 0.8, 0.75 and 1.1 for each expanded area ratio. The new propeller series is composed of 20 propellers and is named as KD(KRISO-DAEWOO) propeller series. Propeller open water tests are performed at the experimental towing tank, and the cavitation observation tests and fluctuating pressure measurements are carried out at the cavitation tunnel of KRISO. $B_{P}-\delta$ curves, which can be used to select the optimum propeller diameter at the preliminary design stage, are derived from a regression analysis of the propeller often water test results. The KD-cavitation chart is derived from the cavitation observation test results by choosing the local maximum lift coefficient and the local cavitation number as parameters. The caviy extent of a propeller can be predicted more accurately by using the KD-cavitation chart at a preliminary design stage, since it is derived from the results of the cavitation observation tests in the selected ship's wake, whereas the existing cavitation charts, such as the Burrill's cavitation chart, are derived from the test results in uniform flow.

• Korean journal of applied entomology
• /
• v.37 no.2
• /
• pp.143-149
• /
• 1998

Development and life table statistics of indian meal moth (Plodia interpunctella, Hiibner)on brown rice (Sativa oryzae L., var 'Ilpum' ) were tested under five different temperatures (17, 20, 25,28 and 3 2 f 0.5"C). The developmental response of females to the temperature was not significantlydifferent from that of males. In the tested temperature range, developmental period and life span of adultmoth decreased as the temperature increased and ranged from 149.9f30.4 to 38.1 k5.6 days and from19.4f 5.1 to 6.9k2.0 days at 17$^{\circ}$C and 32"C, respectively. Emergence rate increased with the increaseof temperature and ranged from 13.0f 6.2% at 17$^{\circ}$C to 49.2f 25.9% at 32$^{\circ}$C. However, hatching ratecurve in relation to the temperature was dome shape with the peak of 73.8 k5.37~a t 25"C, suggesting thathatching is inhibited by high temperature above that temperature. As the temperature increased, femalesconcentrated their oviposition on the second day after emergence. In the temperature range of 17 SIM 25"C, the number of eggs laid per female were not related to the temperature and ranged from 133.4f 37.6to 154.3k57.4. But the number of eggs laid per female decreased at 32$^{\circ}$C which suggests closerelationship with hatching ability. The net reproduction rate was highest at 28$^{\circ}$C and followed by those at25$^{\circ}$C and 20$^{\circ}$C. However intrinsic rate of natural increase of the moth population on brown rice wasestimated to be highest at 32$^{\circ}$C (0.065 per day), probably due to the short developmental period, highemergence rate and the concentrated oviposition of females on earlier days of the emergence.ition of females on earlier days of the emergence.

• Solar Energy
• /
• v.11 no.3
• /
• pp.53-61
• /
• 1991

In this research, Octacosane($C_{28}H_{58}$) and Sodium Acetate Trihydrate($CH_3COONa{\cdot}3H_2O$) were selected as latent heat storage materials to store off-peak electricity or waste heat of an industrial plant. Experimental analyses were performed in terms of the variation of phase change temperature and latent heat, phase change stability for the long term utilization. The results were as follows. 1. The phase change temperatures of industrial grade Octacosane and Sodium Acetate Trihydrate were $60.7^{\circ}C$ and $57.4^{\circ}C$, the latent heat were 60.6kcal/kg and 51.1kcal/kg respectively. 2. The latent heat quantity of Octacosane was decreased with the increasing number of phase change cycles. It decreased from 60.6kcal/kg to 47.2kcal/kg upto 200 cycles and then no variation was observed after 200 cycles. 3. To prevent the supercooling of Sodium Acetate Trihydrate, the nucleating agent, Sodium Pyrophosphate Decahydrate of 3 wt% was added, and then the supercooling temperature (Tm-Tsc) was decreased from $25.7^{\circ}C$ to $1^{\circ}C$. The phase separation was disappeared by the addition of CMC-Na of 3 wt% as a thickener. It was found that the optimal quantity of nucleating agent and thickener was 4wt% considering the stability of SAT as a latent heat storage material. 4. The phase change temperature of Sodium Acetate Trihydrate($CH_3COONa{\cdot}3H_2O$) was adjusted from 57.4 to $46.2^{\circ}C$ by the addition of UREA. And then the latent heat quantity was decreased from 51.1 to 38.3kcal/kg. 5. When the heat storage capacities between the sensible and latent heat storage materials were analyzed and compared in heating process from 30 to $90^{\circ}C$, the heat storage capacity of Octacosane was 2.45 times larger than water and 12.5 times than granite at $60.7^{\circ}C$, and the heat storage capacity of Sodium Acetate Trihydrate was 2.53 times larger than water and 12.91 times than granite at $57.4^{\circ}C$.

• Communications of Mathematical Education
• /
• v.24 no.3
• /
• pp.543-562
• /
• 2010

The purpose of this thesis is to analyze the error happening in the process of solving the simultaneous inequality with two unknown qualities and to propose the correct teaching method. We first introduce a problem about the simultaneous inequality with two unknown qualities. And we will see the solution which a student offers. Finally we propose the correct teaching method by analyzing the error happening in the process of solving the simultaneous inequality with two unknown qualities. The cause of the error are a wrong conception which started with the process of solving the simultaneous equality with two unknown qualities and an insufficient curriculum in connection with the simultaneous inequality with two unknown qualities. Especially we can find out the problem that the students don't look the interrelation between two valuables when they solve the simultaneous inequality with two unknown qualities. Therefore we insist that we must teach students looking the interrelation between two valuables when they solve the simultaneous inequality with two unknown qualities.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.10 no.4
• /
• pp.149-157
• /
• 2008

We investigated chlorophyll contents and growth performances of five deciduous hardwood species growing in central temperate zone of Korean forest. Cornus controversa, Fraxinus rhynchophylla, Betula schmidtii, Prunus leveilleana, and Acer mono seedlings were grown under four different light intensity regime (full sunlight, $65{\sim}72%$, $29{\sim}40%$, and, $7{\sim}12%$ of the full sunlight) for the experiment. The chlorophyll contents of all of the species were highest in $7{\sim}12%$ of the full sunlight, while lowest under the full sunlight. The relative growth rate of root collar diameter and height were decreased with increasing shading level except for Acer mono that showed the highest relative growth rate under $29{\sim}40%$ of the full sunlight. Total biomass and root volumes of the seedlings studied decreased as the light intensity decreased with different shade levels. For Acer mono, however, the biomass and root volumes were highest in $29{\sim}40%$ of the full sunlight. The relative growth rate of root comparing to shoot decreased as shading increased, and as a result, the ratio of aboveground to belowground biomass increased. As the shading level increased, specific leaf area (SLA), leaf area ratio (LAR), and leaf weight ratio (LWR) of most species increased.

• Journal of radiological science and technology
• /
• v.33 no.3
• /
• pp.261-268
• /
• 2010

This study is compared that the dose distribution by experimentation and radiation therapy planning (RTP) when the air cavity region was treated high energy photon. The dose measurements were performed with a 6 MV photon beam of linear accelerator. The polystyrene and self made acyl phantom were similar to tissue density of the human body. A parallel plate chamber was connected to an electrometer. The measurement setup was SCD (Source Chamber Distance) 100 cm and the distance of surface from air cavity was 3 cm. Absorbed dose of interface were measured by area and height. The percent depth dose were measured presence and absence of air cavity, depth according to a ratio of field size and air cavity size. The dose distribution on planning was expressed to do the inhomogeneity correction. As the area of air cavity was increased, the absorbed dose were gradually reduced. It was slightly increased, when the height of air cavity was changed from 0 cm to 0.5 cm. After the point, dose was decreased. In case of presence of air cavity, dose after distal air cavity interface was more great than absence of air cavity. The rebuild up by field size and area of air cavity occurred for field size, $4{\times}4\;cm^2$, $5{\times}5\;cm^2$ and $6{\times}6\;cm^2$, with fixed on area of air cavity, $5{\times}5\;cm^2$. But it didn't occur at $10{\times}10\;cm^2$ field size. On the contrary, the field size was fixed on $5{\times}5\;cm^2$, rebuild up occurred in area of air cavity, $4{\times}4\;cm^2$, $5{\times}5\;cm^2$. but, it did not occur for air cavity, $2{\times}2\;cm^2$, $3{\times}3\;cm^2$. All of the radiation therapy planning were not occurred rebuild up. It was required to pay attention to treat tumor in air cavity because the dose distribution of planning was different from the dose distribution of patient.