• Proceedings of the Korea Database Society Conference
• /
• 1995.12a
• /
• pp.132-142
• /
• 1995

Development in multimedia technology enhances Computer Supported Cooperative Work(CSCW) such as tole-conferencing and tole-education. These applications are also called groupware applications and usually composed of AM conferencing module and shared working space such as group editors. Through this shared working space users can present, manipulate and save common artifacts interactively. Since users are allowed to operate on common artifacts simultaneously, conflicts between user transactions are bound to happen and can cause unnatural effects on user interfaces. In this paper we reviewed these problems and presented common solutions to concurrency control problems. We also presented Coshed/SAS, a group editor, as an example of groupware applications and related concurrency control problems.

• Anxiety and mood
• /
• v.19 no.2
• /
• pp.100-107
• /
• 2023

Objective : This study aimed to estimate the mediating effect of interpersonal problems in the association between depression and smartphone addiction among preadolescence. We verified the gender differences and interpersonal problem subtypes. Methods : This cross-sectional study obtained data from 674 subjects aged 9-12 years. The questionnaire included the Smartphone Addiction Scale-Short Form Version (SAS-SV), the Kovacs' Children's Depression Inventory (CDI), and the Korea Inventory of Interpersonal Problems (KIIP-SC). We analyzed data using Pearson's correlation analysis and evaluated the mediating effect of interpersonal problems. Results : The CDI score showed positive correlations with associated with the SAS-SV and the KIIP. In the total group, the KIIP-PA (Domineering) (b=0.13, 95%CI [0.05, 0.22]), the KIIP-BC (Vindictive)(b=0.07, 95%CI [0.02, 0.14]) and the KIIP-NO (Intrusive) (b=0.07, 95%CI [0.02, 0.13]) significantly mediated the association between the CDI and the SAS-SV. In men, the mediating effect of the KIIP-PA (Domineering) (b=0.20, 95% CI [0.08, 0.35]) was significant. On the other hand, in women, the mediating effect of the KIIP-BC (Vindictive) (b=0.14, 95% CI [0.06, 0.25]) and the KIIP-NO (Intrusive) (b=0.08, 95% CI [0.02, 0.17]) were significant. Conclusion : Understanding the mediating role of interpersonal problems in the association between depression and smartphone addiction may help find the appropriate intervention target.

• Korean Journal of Psychosomatic Medicine
• /
• v.6 no.1
• /
• pp.59-69
• /
• 1998

Objectives: This research was performed to know severity of depression and anxiety, the psychopathology of hemodialysis patients and kidney transplantation patients using Minneesota Multiphasic Personality Inventory(MMPI) and Zung's Self-rating Depression Scale (SDS), Zung's Self-rating Anxiety Scale(SAS), MMPI Subscales. Methods: We surveyed 31 hemodialysis patients and 119 kidney transplantation patients. 119 kidney transplantation group(KT) was investigated at ; 1) Before kidney transplantation (KT-1), 2) Three days after kidney transplantation(KT-2), 3) Three weeks after kidney transplantation(KT-3),4) Follow up at OPD(F/U). Results: 1) According to dermographic data, mean age was KT 33.1, HD 42.2, Control 33.1 years old and KT, HD were belonged to lower economic states and lower educational level than Control. 2) In the depression scale for SDS, KT-1 was more depressed than F/U and Control but depression scale was significantly decreased at KT-2 in comparison with HD. In the anxiety scale for SAS, KT-1 was more anxious than Control but anxiety scale was not different within IT subgroups and in comparison with HD. 3) In comparison of MMPI scales, Hs, D, Pt, Ma at KT-1, Pd, Pa, Pt, Ma at KT-2, F, D, Pd, Pt, Pa, Sc, Ma at KT-3, Pt at F/U were more high scores than Control.

• The Korean Journal of Pain
• /
• v.34 no.1
• /
• pp.72-81
• /
• 2021

Background: In the literature, there have been debates as to whether smartphone use has negative effects on physical and mental health. The present study investigated the extent to which smartphone addiction impacts on musculoskeletal pain prevalence among university students. Methods: The questionnaire consisted of three sections: demographic information, the Smartphone Addiction Scale (SAS), and the modified Nordic Musculoskeletal Questionnaire. Results: A total of 249 participants were included in this cross-sectional study. The body parts that were reported with highest prevalence of musculoskeletal pain were the upper back (70.3%), neck (65.9%), and wrists/hands (68.7%). The SAS scores were correlated with duration of smartphone use on a typical day (P = 0.001), duration of owning a smartphone (P = 0.027), and musculoskeletal pain prevalence in the neck (P = 0.001), wrists/hands (P = 0.001), shoulders (P = 0.025), and upper back (P = 0.023). The SAS score was significantly associated with prevalence of musculoskeletal pain in the neck (odd ratio [OR], 1.08; 95% confidence interval [CI], 0.98-1.10; P = 0.002), wrists/hands (OR, 1.07; 95% CI, 0.97-1.09; P = 0.001), and upper back (OR, 1.10; 95% CI, 0.98-1.11; P = 0.033). Conclusions: The findings indicated that the upper back, neck, and wrists/hands have a higher prevalence of musculoskeletal pain among smartphone users, particularly those with a smartphone addiction. Smartphone addiction scores were correlated with duration of smartphone use on a typical day, duration of owning smartphone, and musculoskeletal pain prevalence in the neck, wrists/hands, shoulders, and upper back.

• The Korean Journal of Applied Statistics
• /
• v.12 no.2
• /
• pp.517-525
• /
• 1999

본 논문에서는 정준판별분석에서 분석자의 사전지식을 고려한 조건부 계량화(partial quantification)를 제안하고 있다. 연관된 수식을 라그랑지 승수법으로 유도하였으며 SAS/IML을 이용한 프로그램과 예제를 간략히 설명하였다.

• Clean Technology
• /
• v.15 no.4
• /
• pp.233-238
• /
• 2009

Supercritical fluid processes have gained great attention as a new and environmentally-benign method of preparing the microparticles of energetic materials like explosives and propellants. In this work, RDX (cyclotrimethylenetrinitramine) was selected as a target explosive. The microparticle formation of RDX using supercritical anti-solvent (SAS) recrystallization process was performed and the effect of operating variables on the size and morphology of prepared particles was observed. N,N-Dimethylformamide was used as organic solvent for dissolving the RDX. The size of the RDX particles decreased remarkably up to less than $10\;{\mu}m$ by SAS recrystallization. In the range of operating conditions of the SAS process studied in this work, the finest RDX particles were obtained at 313.15K, 150 bar, and 15wt% RDX concentration in feed solution.

• Current Optics and Photonics
• /
• v.7 no.6
• /
• pp.738-744
• /
• 2023

Graphene-based saturable absorbers (SAs) are widely used as laser mode-lockers at various laser oscillators. In particular, transmission-type graphene-SAs with ultrabroad spectral coverage are typically manufactured on transparent substrates with low nonlinearity to minimize the effects on the oscillators. Here, we developed two types of transmitting graphene SAs based on CaF₂ and ZnSe. Using the graphene-SA based on CaF₂, a passively mode-locked mid-infrared Cr:ZnS laser delivers relatively long 540 fs pulses with a maximum output power of up to 760 mW. In the negative net cavity dispersion regime, the pulse width was not reduced further by inhomogeneous group delay dispersion (GDD) compensation. In the same laser cavity, we replaced only the graphene-SA based on CaF₂ with the SA based on ZnSe. Due to the additional self-phase modulation effect induced by the ZnSe substrate with high nonlinearity, the stably mode-locked Cr:ZnS laser produced Fourier transform-limited ~130 fs near 2,340 nm. In the stable single-pulse operation regime, average output powers up to 635 mW at 234 MHz repetition rates were achieved. To our knowledge, this is the first attempt to achieve shorter pulse widths from a polycrystalline Cr:ZnS laser by utilizing the graphene deposited on the substrate with high nonlinearity.

• Journal of Korea Entertainment Industry Association
• /
• v.15 no.8
• /
• pp.351-361
• /
• 2021

This study was conducted to identify the factors of hypertension treatment in Gwangju and to establish a hypertension cure rate management plan by using local community health surveys to provide the hypertension cure rate management plan centering around the wellness local community. The research collected 13,714 Gwangju research data among a total of 685,820 local community health surveys of KDCA (Korea Disease Control and Prevention Agency) from 2017 to 2019. Among the data, 2,941 subjects, those with diagnosed hypertension aged over 30, were selected and analyzed through SAS 9.4, SAS Enterprise Miner 15.1. The results are as follows. The differences in hypertension diagnosis cure rate in Gwangju based on the subjects' socioeconomic characteristics were shown in gender, age, marital status, level of educational attainment, economic activity status, and monthly income. The significant differences in hypertension cure rate based on health behavior characteristics were shown in current smoking, monthly alcohol consumption, high-risk drinking, breakfast, recognition of good health level, diabetes and treatment, annual unmet medical needs, and annual health center use. As a result of the logistic regression analysis and interactive decision tree analysis to identify the factors affecting hypertension treatment, the research found that the factors that appear are age, marital status, diabetes and treatment, and annual unmet medical needs. Accordingly, to increase the recognition of the importance of hypertension treatment to people of young ages and not to develop complications, public health-educational effort in Gwangju is needed with an effective preparation plan.

• Journal of the Korean Society for Aviation and Aeronautics
• /
• v.15 no.4
• /
• pp.9-16
• /
• 2007

Tilt rotor aircraft can take off and land vertically and cruise faster than any other helicopter. A scaled flight demonstration model of a tilt rotor aircraft has been developed by KARI. Because the flight characteristics of tilt rotor are not well known, the developed scaled model would be helpful to evaluate flight control algorithm of a full scale aircraft. The tethered hover test has been performed in order to improve hover flight characteristics of tilt rotor aircraft prior to flight test of the small scaled model. During the tethered hover test, the performance of rotor speed governor, rate SAS (Stability Augmentation System) and control surface mixers have been evaluated. We expect that the results of real flight hover test would be quite same as tethered hover test. Therefore the tethered hover test results will reduce the risk of flight test properly by fixing some of hidden problems which might occur during the flight test. This paper presents the results of tethered hover test in detail and shows how it could be final ground test before flight test. The control mixer gain and rate SAS feedback gains were modified in order to get higher controllability and stability during the tethered hover flight. The rotor governor showed that it could keep rotor RPM constant with very small deviation even during severe pilot collective input change. The tethered hover test results gave pilot and engineers confirmation and experience about the scheduled flight test.

• Nuclear Engineering and Technology
• /
• v.38 no.6
• /
• pp.575-584
• /
• 2006

As the development of total management systems for sites along with site environmental information is becoming standard, the system known as the Site Information and Total Environmental database management System (SITES) has been developed over the last two years. The first result was a database management system for storing data obtained from facilities, and a site characterization in addition to an environmental assessment of a site. The SITES database is designed to be effective and practical for use with facility management and safety assessment in relation to Geographic Information Systems. SITES is a total management program, which includes its database, its data analysis system required for site characterization, a safety assessment modeling system and an environment monitoring system. It can contribute to the institutional management of the facility and to its safety reassessment. SITES is composed of two main modules: the SITES Database module (SDM) and the Monitoring & Assessment (M&A) module [1]. The M&A module is subdivided into two sub-modules: the Safety Assessment System (SAS) and the Site Environmental Monitoring System (SEMS). SAS controls the data (input and output) from the SITES DB for the site safety assessment, whereas SEMS controls the data obtained from the records of the measuring sensors and facilities. The on-line site and environmental monitoring data is managed in SEMS. The present paper introduces the procedure and function of the M&A modules.