• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2009년도 제38회 동계학술대회 초록집
• /
• pp.51-51
• /
• 2010

Group III-nitride semiconductors have been widely studied as the materials for growth of light emitting devices. Currently, GaN devices are predominantly grown in the (0001) c-plane orientation. However, in case of using polar substrate, an important physical problem of nitride semiconductors with the wurtzite crystal structure is their spontaneous electrical polarization. An alternative method of reducing polarization effects is to grow on non-polar planes or semi-polar planes. However, non-polar and semipolar GaN grown onto r-plane and m-plane sapphire, respectively, basically have numerous defects density compared with c-plane GaN. The purpose of our work is to reduce these defects in non-polar and semi-polar GaN and to fabricate high efficiency LED on non/semi-polar substrate. Non-polar and semi-polar GaN layers were grown onto patterned sapphire substrates (PSS) and nano-porous GaN/sapphire substrates, respectively. Using PSS with the hemispherical patterns, we could achieve high luminous intensity. In case of semi-polar GaN, photo-enhanced electrochemical etching (PEC) was applied to make porous GaN substrates, and semi-polar GaN was grown onto nano-porous substrates. Our results showed the improvement of device characteristics as well as micro-structural and optical properties of non-polar and semi-polar GaN. Patterning and nano-porous etching technologies will be promising for the fabrication of high efficiency non-polar and semi-polar InGaN LED on sapphire substrate.

• 한국진공학회지
• /
• 제16권1호
• /
• pp.27-32
• /
• 2007

양자우물의 두께가 다른 4종류의 $In_xGa_{1-x}N(x=0.15)/GaN$ 다중 양자우물 구조의 PL 스펙트럼을 분석하여 InGaN에서의 결정상 분리 현상을 조사하였다. 우물폭이 1.5 nm에서 6.0 nm로 증가함에 따라, PL스펙트럼은 비대칭성이 점점 강해지는 이중 피크의 특성을 나타내었다. 곡선맞춤을 수행하여 분리한 2개의 피크를 분석하여, InGaN 우물에서의 부준위 천이에 해당하는 고에너지 피크의 세기는 줄어드는 반면, 상분리에 의하여 생성된 저에너지 피크의 강도는 점점 강해짐을 볼 수 있었다. 이것은 InGaN 우물에는 In 조성이 다소 다른 2개의 결정상이 존재하여, 우물폭 증가와 함께 InN 상분리가 강해지면서 In 조성이 큰(In-rich) InGaN 결정상이 상대적으로 증대됨을 보여 주는 결과로 해석된다. 우물 두께가 6.0 nm인 시료에서는 저에너지 영역(${\sim}2.0eV$)에서 또 하나의 피크이 관측되었는데, 이것은 GaN에서 잘 알려져 있는 결함에 기인한 황색준위(YB)와 그 근원이 같은 것으로, InN의 상분리가 임계값 이상으로 발달하여 생성된 결함과 관련된 준위인 것으로 해석된다.

• 한국결정성장학회지
• /
• 제8권3호
• /
• pp.388-395
• /
• 1998

본 연구에서는 기상화학 증착법으로 성장되는 GaN 후막에 대한 열역학적 전사모사를 수행하고 이를 실험결과와 비교, 검토하였다. 열역학적계산은 화학양론적 연산방식을 이용하여 수치 해석하였으며, 모사의 변수로써 온도범위는 400~1500K, 기상비율은 $(GaCl_3)/[GaCl_3+NH_3],(N_2)/(GaCl_3+NH_3)$를 취하였다. GaN의 성장온도 범위는 이론적인 계산이 실험결과보다 훨씬 낮은 450~750K으로 예측되었다. 성장온도에서 모사결과와 실험결과와의 차이는 GaN의 기상 에픽텍시 성장이 박막성장의 높은 활성화 에너지 때문에 반응속도론적으로 국한된 영역 내에서 발생한다는 것을 나타낸다.

• 한국광학회:학술대회논문집
• /
• 한국광학회 2001년도 제12회 정기총회 및 01년도 동계학술발표회
• /
• pp.48-49
• /
• 2001

GaN는 wurzite structure를 갖는 wide bandgap III-V족 반도체로서, 청색 반도체 laser diode (LD), light emitting diode (LED)등으로 응용되는 물질이다. InGaN quantum well은 GaN계의 청색 LD, LED 구조에서 활성층으로 사용되기 때문에 이에 대한 광학적 연구가 활발하다. InGaN는 GaN위에 성장하면 strain에 의해 piezoelectric 효과가 크게 나타나는 것으로 알려져 있다. 이러한 piezoelectric potential에 의해 외부에서 voltage가 가해지지 않은 상황에서도 InGaN quantum well내의 electron, hole의 wave function이 비대칭 potential의 영향을 받게된다. (중략)

• 전기화학회지
• /
• 제17권1호
• /
• pp.1-6
• /
• 2014

본 총설은 질화 갈륨(GaN)을 이용한 광전기화학적 물분해 연구에 대해 정리하였다. GaN는 화학적으로 안정하고 에너지 띠간격 조절이 자유롭다는 장점으로 최근 물분해를 위한 새로운 광전극 물질로 연구되고 있다. 다른 화합물 반도체 물질은 강산 혹은 강염기 전해액에 의해 쉽게 부식되기 때문에 광산화전극(photoanode)으로는 사용이 어려운 반면, n형 GaN는 뛰어난 안정성 덕분에 산화 분위기의 산소 발생 전극으로도 활용이 가능하다. 또한, 최근에는 p형 GaN을 환원전극으로 이용한 광전극에 대한 연구도 보고되었다. GaN 물질이 실제 응용되기 위해 필요한 과제들에 대해 다루었다.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제3권2호
• /
• pp.96-101
• /
• 2003

Direct evidence on the incorporation of high concentration of oxygen into undoped AlGaN layers for the AlGaN/GaN heterostuctures is provided by scanning photoemission microscopy using synchrotron radiation. In-situ annealing at $1000^{\circ}C$ resulted in a significant increase in the oxygen concentration at the AlGaN surface due to the predominant formation of Al-O bonds. The oxygen incorporation into the AlGaN layers resulting from the high reactivity of Al to oxygen can enhance the tunneling-assisted transport of electrons at the metal/AlGaN interface, leading to the reduction of the Schottky barrier height and the increase of the sheet carrier concentration near the AlGaN/GaN interface.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1997년도 춘계학술대회 논문집
• /
• pp.66-69
• /
• 1997

The p-GaN fins doped with the impurity of Zn were grown on n-GaN films to prevent the defects from the lattice mismatch with sapphire substrates by HVPE. For growth of the high quality n-GaN, the optimized conditions were at first deduced from the results of various HCI gas flow rates and growth temperatures. On the basis of these conditions, p-GaN films were grown and investigated of the characteristics. The FWHM of the double crystal rocking curve of n-GaN was decreased and the hexagonal phases on the surface of GaN films were tend to be vivid with the inoement of HCI gas flow rates. Finally the n-type GaN films with FWHM of 648arcsec were obtained at 10cc/min of HCI gas. As the GaN films were grown with the above conditions, Zn was introduced in the form of vapor as a dopant for p-GaN films. But when Zn vaporized at 77$0^{\circ}C$ was doped to the films, the crystallites of Zn were distributed uniformly on the surface of the GaN film due to the over-doped.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2006년도 추계학술대회 논문집 Vol.19
• /
• pp.315-316
• /
• 2006

We fabricated GaN nanopores m the etching process of anodic oxidation of aluminum. The aluminum was deposited by using E-beam evaporator on p-type GaN. After the aluminum was anodized GaN structure was exposed to the electric field with the oxidat species. The fabricated nanopore structure provides the enhanced intensity of light emission at the wavelengths 470 nm. We investigated the structure of the GaN nanopores from FE-SEM and EDS measurements.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2013년도 제44회 동계 정기학술대회 초록집
• /
• pp.312-312
• /
• 2013

GaN based light emitting diodes (LEDs) are important devices that are being used extensively in our daily life. For example, these devices are used in traffic light lamps, outdoor full-color displays and backlight of liquid crystal display panels. To realize high-brightness GaN based LEDs for solid-state lighting applications, the development of p-type ohmic electrodes that have low contact resistivity, high optical transmittance and high refractive index is essential. To this effect, indiumtin oxide (ITO) have been investigated for LEDs. Among the transparent electrodes for LEDs, ITO has been one of the promising electrodes on p-GaN layers owing to its excellent properties in optical, electrical conductivity, substrate adhesion, hardness, and chemical inertness. Sputtering and e-beam evaporation techniques are the most commonly used deposition methods. Commonly, ITO films on p-GaN by sputtering have better transmittance and resistivity than ITO films on p-GaN by e-bam evaporation. However, ITO films on p-GaN by sputtering have higher specific contact resistance, it has been demonstrated that this is due to possible plasma damage on the p-GaN in the sputtering process. In this paper, we have investigated the advanced sputtering using plasma damage-free p-electrode. Prepared the ITO films on the GaN based LEDs by e-beam evaporation, normal sputtering and advanced sputtering. The ITO films on GaN based LEDs by sputtering showed better transmittance and sheets resistance than ITO films on the GaN based LEDs by e-beam evaporation. Finally, fabricated of GaN based LEDs by using advanced sputtering. And compared the electrical properties (measurement by using C-TLM) and structural properties (HR-TEM and FE-SEM) of ITO films on GaN based LEDs produced by e-beam evaporation, normal sputtering and advanced sputtering. As a result, It is expected to form plasma damage free-electrode, and better light output power and break down voltage than LEDs by e-beam evaporation and normal sputter.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제15권5호
• /
• pp.554-562
• /
• 2015

This paper presents the design and analysis of gate-recessed AlGaN/GaN Fin-type Field-Effect Transistor (FinFET). The three-dimensional (3-D) technology computer-aided design (TCAD) simulations were performed to analyze the direct-current (DC) and radio-frequency (RF) characteristics for AlGaN/GaN FinFETs. The fin width ($W_{fin}$) and the height of GaN layer ($H_{GaN}$) are the design parameters used to improve the electrical performances of gate-recessed AlGaN/GaN FinFET.