• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.02a
• /
• pp.317-318
• /
• 2013

Terahertz (THz) wave는 광학 영역과 방송파 영역 사이에 광대역 주파수 스펙트럼을 차지하고 있다. X선과는 달리 비이온화 광원으로 직진성, 투과성, 낮은 에너지 (meV)를 가지고 있어 비파괴적이고 무해한 장점을 지니고 있다. 본 연구에서는 In0.53Ga0.47As:Be/In0.52Al0.48As의 multi quantum well (MQW)을 Semi-insulting InP:Fe substrate 위에 active layer의 두께와 적층을 변화주어서 성장하였고Au (200 nm)/Ti (30 nm)의 금속전극으로 공정을 하였다. Ti:Sapphire femtosecond pulse laser를 조사하여 THz time-domain spectrometer 시스템을 이용하여 광전도검출법으로 THz 검출 특성을 연구하였다. THz 검출은 짧은 전하수명과 높은 저항을 요구한다. LTInGaAs의 경우 AsGa antisite로 인하여 짧은 전하수명을 얻게 되면 n-type의 높은 전하밀도를 가지게 되어서 저항이 낮아지게 된다. 높은 저항을 만들기 위하여 Be doping을 이용하여 과잉의 전자들을 보상하고 InAlAs layer를 삽입시켜 보다 높은 저항을 얻었다. LT-InGaAs:Be는 LT-GaAs보다 1/70 정도의 amplitude를 보이는데 LT-InGaAs/InAlAs MQW의 경우 LT-GaAs 대비 약 3/4 정도의 큰 amplitude를 얻었다. 또 active layer의 두께가 얇고 적층이 많을수록 신호가 커지는 것을 알 수 있었다. 이는 상대적으로 band gap이 큰 InAlAs층이 더 높은 저항을 만든 것으로 사료된다.

• Journal of the Korean Vacuum Society
• /
• v.9 no.2
• /
• pp.130-135
• /
• 2000

We have analyzed characteristics for the structure of $Al_{0.25}/Ga_{0.75}/As/In_{0.15}/Ga_{0.85}$/AS/GaAS pseudomorphic high electron mobility transistor (PHEMT) by photoluminescence (PL) and photoreflectance (PR) measurements. By the PL measurement at 10 K, we observed el-hl transition peak at 1.322 eV and e2-hl transition peak at 1.397 eV in the InGaAs quantum well. We calculated value of 23 meV, the difference between the first energy level and the second energy level of a valence band by dependence of temperatures. Also, (e2-h2) transition signal was observed at 300 K by PR measurement. From the PR measurement, we recognized that the transition was dominated the second energy level of conduction band than the first energy level of conduction band due to band filling. The other hand, PL signal of the first energy level of conduction band was dominated because of the electron screening effect.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.15 no.8
• /
• pp.752-758
• /
• 2004

This paper reports on the DC and RF characteristics of AlGaN/InGaN/GaN high electron-mobility transistors (HEMTs) grown by molecular beau epitaxy(MBE) on sapphire substrates. The devices with a 0.5 ${\mu}$m gate-length exhibited relatively flat transconductance(g$\_$m/), which results from the enhanced carrier confinement of the InGaN channel. The maximum drain current was 880 mA/mm with a peak g$\_$m/ of 156 mS/mm, an f$\_$T/ of 17.3 GHz, and an f$\_$MAX/ or 28.7 GHz. In addition to promising DC and RF results, pulsed I-V and current-switching measurements showed little dispersion in the unpassivated AlGaN/InGaN HEMTs. These results suggest that the addition of In to the GaN channel improves the electron transport characteristics as well as suppressing current collapse that is related to the surface trap states.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1996.11a
• /
• pp.160-163
• /
• 1996

To develope output characteristics of GaAs MESFET, which utilized in high frequency ranges, $Al_{0.2}$Ga$_{0.8}$As/GaAs layer was used. In this case, to minimize effects of deep-level in $Al_{0.2}$Ga$_{0.8}$As/GaAs layer, aluminium mole fraction was design to 0.2. HP 4145B was used in measurement, I$_{dss}$ was 25mA when V$_{G}$=0. Maximum transconductance was 168.75mS/mm, electron mobility was 3750 $\textrm{cm}^2$/V-s, therefore, it must be suitable for active device in MMIC. Also, Ideality factor was 1.26, which was similar to that of ideal schottky diode.

• Journal of the Korean Vacuum Society
• /
• v.12 no.4
• /
• pp.218-227
• /
• 2003

Pd/Si/Ti/Pt and Pd/Si/Pd/Ti/Au ohmic contacts to n-type InCaAs were investigated for applications to AlGaAs/GaAs HBT emitter ohmic contacts. In the Pd/Si/Ti/Pt ohmic contact, as-deposited contact showed non-ohmic behavior, and high specific contact resistivity of $5\times10^{-3}\Omega\textrm{cm}^2$ was achieved by rapid thermal annealing at $375^{\circ}C$/10 sec. However, the specific contact resistivity decreased remarkably to $2\times10^{-6}\Omega\textrm{cm}^2$ by annealing at $425^{\circ}C$/10sec. In the Pd/Si/Pd/Ti/Au ohmic contact, minimum specific contact resistivity of $3.9\times10^{-7}\Omega\textrm{cm}^2$ was achieved by annealing at $400^{\circ}C$/20sec. In both ohmic contacts, low contact resistivity and non-spiking planar interface between ohmic materials and InGaAs were maintained. Therefore, these thermally stable ohmic contact systems are promising candidates for compound semiconductor devices. RF performance of the AlGaAs/GaAs HBT was also examined by employing the Pd/Si/Ti/Pt and Pd/Si/Pd/Ti/Au systems as emitter ohmic contacts. Cutoff frequencies were 63.9 ㎓ and 74.4 ㎓, respectively, and maximum oscillation frequencies were 50.1 ㎓ and 52.5 ㎓, respectively. It shows very successful high frequency operations.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.02a
• /
• pp.441-441
• /
• 2012

Franz Keldysh Oscillation (FKO)은 p-n 접합 구조의 Photoreflectance (PR) spectra에서 표면 및 계면의 전기장(electric field) 특성을 반영한다. InAs/GaAs 양자점 태양전지(Quantum Dot Solar Cell, QDSC) 구조에서 InAs 양자점 층 전후에 AlGaAs 층을 삽입하여 퍼텐셜 장벽(potential barrier) 두께에 따른 PR spectra 및 GaAs-matrix에서 FKO 주파수 특성을 비교 분석하였다. InAs/GaAs 양자점 태양전지는 p-i-n 구조의 i-GaAs에 2.0 monolayer (ML), 8주기의 InAs 양자점 층을 삽입하여 Molecular Beam Epitaxy (MBE) 방법으로 성장하였다. 각 양자점 층 전후에 두께가 각각 0.0, 1.6, 2.8, 6.0 nm인 AlGaAs 층을 삽입하여 퍼텐셜 장벽 두께에 따른 FKO 주파수 변화를 관측하였다. 또한 태양전지 구조의 전기장 분포를 좀 더 용이하게 관측하기 위해 여기 광의 세기(power intensity)를 충분히 낮추어 Photovoltaic effect에 의한 내부 전기장의 변화를 최소화하여 비교 분석하였다. InAs/GaAs 양자점 태양전지 구조에서 AlGaAs 장벽층이 없는 경우, PR spectra의 Fast Fourier Transform 결과에 반영되는 FKO 주파수 특성은 p-i-n 구조 계면에서 공핍층(depletion region)의 space charge field보다 양자점 층의 내부 전기장에 의한 FKO 주파수가 더 큰 진폭(amplitude)을 보였다. 반면에, AlGaAs 장벽층이 삽입되면 두께가 커짐에 따라 p-i-n 구조 계면의 space charge field에 의해 더 큰 진폭의 FKO 주파수가 관측되었다. 이는 AlGaAs 장벽층이 삽입됨으로써 양자점 층 내 양자 상태 수 및 여기광에 의한 캐리어의 수와 관련이 있음을 확인하였으며, 결과적으로 GaAs-matrix에서 p-i-n 구조 계면의 space charge field에 영향을 미치게 됨을 알 수 있다. 이러한 PR 특성 결과들을 InAs/GaAs 양자점 태양전지의 설계 및 제조에 반영함으로써 양자효율 증대에 기여할 것으로 기대된다.

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.32A no.7
• /
• pp.51-57
• /
• 1995

The theoretical analysis for AlInAs/GaInAs resonant tunneling diodes (RTDs), which have shown the improved negative differential resistance (NDR) characteristics, has scarcely been made in comparison with AlGaAS/GaAs RTDs. In this paper, the static current-voltage relation of Al$_{0.48}In_{0.52}As/Ga_{0.47}In_{0.53}$As RTDs were numerically estimated by using a self-consistent method. Assuming a simplified RTD with single quantum well structure and spacer layers, the peak current density (J$_{P}$) and the peak-to-valley current ratio (PVCR) were analysed as the function of the thickness of the well, the barrier and the spacer layer, and temperature. As the results, the peak current density and the peak-to-valley current ratio indicated a reciprocal relation roughly in respect to the thicknesses of the well and the barrier, and it was theoretically predicted that it be not attainable to provide a high peak current desity (J$_{P}$) over 1${\times}10^{5}A/cm^{2}$ as well as the large peak-to-valley current ratio (PVCR) over 10 that were the the critical conditions for the practical use.

• Proceedings of the IEEK Conference
• /
• 2001.06b
• /
• pp.25-28
• /
• 2001

In this paper, we have investigated the effects of gas flow rate, rf power, process pressure and Ar addition on reactive ion etching of InP, InGaAs and InAlAs using Sic14 and Cl$_2$ gases. The etch rates were measured by using a surface profiler. The etched profiles, sidewall roughness, and surface morphology were observed by scanning electron microscopy and by atomic force microscopy. The selective etching of InGaAs to InP and InAlAs was studied by varying the etching parameters. It was found that Cl$_2$ gas is more efficient for the selective etching of InGaAs to InAlAs than SiCl$_4$ gas. The etch selectivity of InGaAs to InAlAs is strongly dependent on the rf power and the process pressure.

• KIEE International Transactions on Electrophysics and Applications
• /
• v.5C no.2
• /
• pp.54-57
• /
• 2005

Photoreflectance (PR) has been measured to investigate the characterization of the Si$_{3}$N$_{4}$Al$_{0.21}$ Ga$_{0.79}$As/GaAs and Al$_{0.21}$Ga$_{0.79}$As/GaAs heterostructures. In the PR spectrum, the caplayer thickness was 170 nm and Si$_{3}$N$_{4}$ was utilized as the capping material. The C peak is confirmed as the carbon defect with residual impurity originating from the growth process. After annealing, in the presence of the Si$_{2}$N$_{4}$ cap layer, band gap energy was low shifted. This result indicates that the Si$_{3}$N$_{4}$ cap layer controlled evaporation of the As atom.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.02a
• /
• pp.391-392
• /
• 2012

In these days, the desire for the precise and tiny displays in mobile application has been increased strongly. Currently, laser displays ranging from large-size laser TV to mobile projectors, are commercially available or due to appear on the market [1]. In order to achieve a mobile projectors, the semiconductor laser diodes should be used as a laser source due to their size and weight. In this presentation, the continuous etch characteristics of Pd and AlGaN/GaN superlattice for the fabrication of blue laser diodes were investigated by using inductively coupled $CHF_3$ and $Cl_2$ -based plasma. The GaN laser diode samples were grown on the sapphire (0001) substrate using a metal organic chemical vapor deposition system. A Si-doped GaN layer was grown on the substrate, followed by growth of LD structures, including the active layers of InGaN/GaN quantum well and barriers layer, as shown in other literature [2], and the palladium was used as a p-type ohmic contact metal. The etch rate of AlGaN/GaN superlattice (2.5/2.5 nm for 100 periods) and n-GaN by using $Cl_2$ (90%)/Ar (10%) and $Cl_2$ (50%)/$CHF_3$ (50%) plasma chemistry, respectively. While when the $Cl_2$/Ar plasma were used, the etch rate of AlGaN/GaN superlattice shows a similar etch rate as that of n-GaN, the $Cl_2/CHF_3$ plasma shows decreased etch rate, compared with that of $Cl_2$/Ar plasma, especially for AlGaN/GaN superlattice. Furthermore, it was also found that the Pd which is deposited on top of the superlattice couldn't be etched with $Cl_2$/Ar plasma. It was indicating that the etching step should be separated into 2 steps for the Pd etching and the superlattice etching, respectively. The etched surface of stacked Pd/superlattice as a result of 2-step etching process including Pd etching ($Cl_2/CHF_3$) and SLs ($Cl_2$/Ar) etching, respectively. EDX results shows that the etched surface is a GaN waveguide free from the Al, indicating the SLs were fully removed by etching. Furthermore, the optical and electrical properties will be also investigated in this presentation. In summary, Pd/AlGaN/GaN SLs were successfully etched exploiting noble 2-step etching processes.