• Proceedings of the IEEK Conference
• /
• 2000.06b
• /
• pp.16-19
• /
• 2000

DC and low frequency noise characteristics of InGaP/InGaAs pseudomorphic HEMTs (p-HEMTs) grown by compound source MBE are investigated for temperature range of 150K to 370K. Equivalent input noise spectra( $S_{iv}$ ) were measured as a function of frequency and temperature. $S_{iv}$ was measured to be 3.4 $\times$ 10$^{-12}$ $V^2$/ Hz at 1kHz for 1.3 X 50${\mu}{\textrm}{m}$$^2$InGaP/InGaAs p-HEMT at room temperature. Measurements of the low-frequency noise spectra of the p-HEMT as a function of temperature show that the trap with an activation energy level around 0.589 eV is a dominant trap that accounts for the low-frequency noise behavior of the device. The normalized extrinsic gm frequency dispersion of the p-HEMT. was as low as 2.5％ at room temperature, indicating that the device has well-behaved low-frequency noise characteristics. Sub-micron (0.25 $\times$ 50${\mu}{\textrm}{m}$$^2$) gate p-HEMT showed $f_{T}$ and $f_{max}$ of 40GHz and 108GHz, respectively.y.y.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.08a
• /
• pp.363-364
• /
• 2012

기존 양자점에 대한 연구는 레이저 다이오드와 광증폭기등과 같은 광소자의 활성층에 사용되던 양자우물을 대체하기 위하여 고밀도, 고균일 양자점 성장에 관한 연구가 활발히 진행되었지만, 최근에는 양자점을 이용한 Single-photon source의 관심이 높아짐에 따라 저밀도 양자점 성장에 관한 연구가 주목 받고 있다. 본 연구에서는 수직형 저압 Metal organic chemical vapor deposition (MOCVD)를 이용하여 InP 기판 위에 저밀도 InAs 양자점을 성장하였다. 저밀도의 양자점을 성장하기 위하여 양자점과 덮개 층($1.1 {\mu}m$ InGaAsP)사이에 V족 원료 가스인 As만 공급하는 성장 중단 시간 (GI:Growth interruption)을 삽입하였다. 시료의 구조는 InP (100)기판위에 50 nm InGaAsP barrier, 1.5ML GaAs를 성장 후 InAs 1.9 ML를 성장하였다. 그 후 0, 1, 2, 5 분의 GI을 삽입한 후 InGaAsP 와 InP 덮개층을 성장하였다. 양자점의 밀도와 형상을 측정하기 위하여 Atomic force microscopy (AFM)을, 광학적 특성 분석을 위하여 저온 Micro Photoluminescence (${\mu}$-PL)을 측정하였다. 성장 중단 시간의 증가에 따라 InAs/InP 양자점의 높이와 넓이는 증가하고 밀도는 감소하였다. 성장 중단 시간 3분 이후에는 밀도 감소가 둔화 되었으며, 5분일 때 $3.2{\times}10^7/cm^2$의 극저밀도 InAs/InP 양자점이 성장되었다. 또한 저밀도 양자점 시료의 저온 ${\mu}$-PL을 측정하여 단일 양자점의 exciton과 bi-exciton peak가 측정되었다.

• Asian-Australasian Journal of Animal Sciences
• /
• v.14 no.7
• /
• pp.979-985
• /
• 2001

Two experiments on commercial broiler chickens (3-37 d) and WL layers (252-364 d) were conducted to study the relative bioavailability of phosphorus (P) from different P supplements in comparison to tricalcium phosphate (TCP), at constant dietary calcium (Ca):P ratio. The P sources tested were dicalcium phosphate (DCP), steam sterilized bone meal (SSBM), commercial mineral mixture (CMM), phosphoric acid (PA) and a combination of CMM + PA. Fluorine (F) content in CMM and SSBM was 13.12 and 0.14 g/kg, respectively. In commercial broiler diets, DCP, SSBM or PA could be used as supplemental P sources without affecting (p<0.05) weight gain, feed intake, tibia ash and, P and Ca contents in tibia ash when compared to TCP. Severity of leg abnormality and deposition of F in bone were higher (p<0.05) in group fed CMM. P retention and serum inorganic P content was significantly reduced (p<0.05) in CMM fed birds compared to those fed TCP, SSBM, PA or CMM+PA. Among other P sources (TCP, SSBM, PA and CMM+PA) the serum inorganic P levels did not vary significantly (p<0.05). The P retention also significantly reduced in CMM fed groups compared to those fed DCP or PA. The P retention significantly increased from 0.183 to 0.216 units by supplementation of PA to CMM diet. In layers, egg production was not affected by replacing TCP with DCP, SSBM, PA or CMM+PA, but significantly (p<0.05) reduced with CMM. Feed (kg)/kg egg mass, egg weight, shell quality (shell weight and shell thickness) and serum Ca levels were not influenced by dietary variation in P source. The poor performance of both broilers and layers fed on CMM based diets could be attributed to the presence of hlgher levels of F (647.8 and 630.1 mg/kg, respectively) and low P utilization. Based on growth, bone mineralization and P retention it is concluded that DCP, SSBM or PA can be used as alternatives to TCP in broiler diets. In WL layer diets, in addition to above P sources, CMM can also be used as supplemental P source by replacing one half of P from CMM with PA without affecting egg production and shell quality.

• Proceedings of the IEEK Conference
• /
• 2006.06a
• /
• pp.467-468
• /
• 2006

To perform the comparative study, we experimented on two differential epitaxial structures, the conventional Metamorphic High Electron Mobility Transistor (MHEMT) using the InAlAs/InGaAs structure and the InP-composite channel MHEMT adopting the InAlAs/InGaAs/InP/n-InP structure. Compared to the conventional MHEMT, the InP-composite channel MHEMT shows improved breakdown performance; over about 3.5 V. This increased breakdown voltage can be explained by the lower impact ionization coefficient of the InP-composite channel MHEMT than that of the conventional MHEMT.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.3 no.2
• /
• pp.63-68
• /
• 2003

The DC and RF characteristics of $In_{0.5}Ga_{0.5}P/In_{0.22}Ga_{0.78}As/GaAs$ p-HEMTs with a gate oxide layer of various thicknesses ($50{\;}{\AA},{\;}300{\;}{\AA}$) were investigated and compared with those of a Schottky-gate p-HEMT without the gate oxide layer. A prominent improvement in the breakdown voltage characteristics were observed for a p-HEMT having a gate oxide layer, which was implemented by using a liquid phase oxidation technique. The on-state breakdown voltage of the p-HEMT having the oxide layer of $50{\;}{\AA}$was ~2.3 times greater than that of a Schottky-gate p-HEMT. However, the p-HEMT having the gate oxide layer of $300{\;}{\AA}$ suffered from a poor gate-control capability due to the drain induced barrier lowering (DIBL) resulting from the thick gate oxide inspite of the lower gate leakage current and the higher on-state breakdown voltage. The results for a primitive p-HEMT having the gate oxide layer without any optimization of the structure and the process indicate the potential of p-HEMT having the gate oxide layer for high-power applications.

• Journal of Plant Biology
• /
• v.29 no.3
• /
• pp.185-196
• /
• 1986

Anatomical characteristics of the secondary xylem in the roots and the stems of genus Pinus including nine species growing naturally in Korea have been studied to elucidate the structural differences between two organs. The results, comparing the root woods with the stem woods, are as follows; The transition from the early-wood to the late-wood occurs more gradually in the root woods. In the root woods, the bordered pits on the radial wall of tracheid are frequent in the two rows. The spiral thickening on the radial and tangential wall of the tracheid can be seen in the only stem woods of four species such as P. koraiensis, P. rigida, P. rigitaeda and P. banksiana. In the majority of the species studied, the length of the tracheid is longer in the root woods, but in some species such as P. strobus, P. densiflora, P. rigida and P. sylvestris, this length is almost sam ein both organs. The diameter of the tracheid in the root woods is wider. The wall thickness of the tracheid in the early wood is thicker in the root woods, but vice versa in the late woods. More rays per unit area can be seen in the root woods.

• Journal of Digital Convergence
• /
• v.17 no.9
• /
• pp.71-78
• /
• 2019

This study aims to identify good borrowers within the context of P2P lending. P2P lending is a growing platform that allows individuals to lend and borrow money from each other. Inherent in any loans is credit risk of borrowers and needs to be considered before any lending. Specifically in the context of P2P lending, traditional models fall short and thus this study aimed to rectify this as well as explore the problem of class imbalances seen within credit risk data sets. This study implemented an over-sampling technique known as Synthetic Minority Over-sampling Technique (SMOTE). To test our approach, we implemented five benchmarking classifiers such as support vector machines, logistic regression, k-nearest neighbor, random forest, and deep neural network. The data sample used was retrieved from the publicly available LendingClub dataset. The proposed SMOTE revealed significantly improved results in comparison with the benchmarking classifiers. These results should help actors engaged within P2P lending to make better informed decisions when selecting potential borrowers eliminating the higher risks present in P2P lending.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.23 no.6
• /
• pp.780-788
• /
• 1986

1.3\ulcorner GaInAsP BH(Buried Heterostructure) lasers were fabricated on the p-InP substrate. Two step chemical etching processes and melt-back etching technique during 2nd epitaxy were used for BH active layer. BH laser had the threshold current, Ith, of 72mA(23\ulcorner), peak wavelength of 1.2937\ulcorner, nd of 10-20%, and To of 85K. They operated in single mode under pulse condition up to 1.4 Ith. CW(DC) operation was successfully performed at room temperature.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.11 no.1
• /
• pp.12-17
• /
• 1998

The heteroepitaxial growth of InP and GaInAs on GaAs substrates has been studied by using a new combination of source materials: ethyldimethylindium (EDMIn) and trimethylgallium (TMGa) as group III sources, and tertiarybutylarsine (TBAs) and tertiarybutylphosphine (TBP) as group V sources. Device quality InP heteroepitaxial layers were obtained by using a two-step growth process under atmospheric pressure, involving a growth of an initial nucleation layer at low temperature followed by high temperature annealing and the deposition of epitaxial layer at a growth temperature. The continuity and thickness of nucleation layer were important parameters. The InP layers deposited at 500$^{\circ}$- 55$0^{\circ}C$ are all n-type, and the electron concentration decreases with decreasing TBP/EDMIn molar ratio. The excellent optical quality was revealed by the 4.4 K photoluminescence (PL) measurement with the full width at half maximum (FWHM) of 4.94 meV. Epitaxial Ga\ulcorner\ulcorner\ulcornerIn\ulcorner\ulcorner\ulcornerAs layers have been deposited on GaAs substrates at 500$^{\circ}$ - 55$0^{\circ}C$ by using InP buffer layers. The composition of GaInAs was determined by optical absorption measurements.

• Korean Journal of Oriental Medicine
• /
• v.16 no.1
• /
• pp.119-134
• /
• 2010

Objectives & Method：Based on the statistic from January 2008 to December 2008 include 66-year-old 375 people (159 men, 216 women) who got examined in National Health Insurance Corporation, this study set a goal to establish a new health index by analyzing the relation between the cardio-cerebra vascular disease and risk factor such as obesity, smoking, exercise, alcohol consumption, blood pressure, blood sugar and cholesterol. Results：1) Examine results, health status according to gender；People who are diagnosed as abnormal health status have higher risk for both men and women. As for the detailed diseases, high blood pressure was highest followed by hyperlipidemia and obesity. In case of the women, 96.3% in bone mineral density was highest. 2) Correlation of disease and health risk factors based on gender；Correlation of disease according to gender in the obesity(p<0.001), lipid abnormalities(p<0.001), kidney diseases(p<0.001), chest diseases(p<0.05), osteoporosis(p<0.001) showed a statistically significant difference. The analysis showed that the men have more obesity and lipid abnormalities as well as thoracic disease than the women, but the women have more kidney disease than the men. As for the osteoporosis examine which is conducted only for the women, most of the women were abnormal even though it cannot compare the result according to gender. Obesity(p<0.001), alcohol(p<0.001), smoking(p<0.001) and LDLcholesterol(p<0.001) showed statistical correlation between gender and health risk factor. And only high blood pressure(p<0.001) showed a statistical correlation between gender and risk of cardio-cerebra vascular disease. 3) Risk of cardio-cerebra vascular disease related to health risk factor characteristic；Obesity assessment(p<0.001), alcohol(p<0.05), smoking(p<0.05), blood pressure(p<0.001), glucose(p<0.001) showed correlation between health risk factor and stroke. Drinking(p<0.001), smoking(p<0.05), exercise(p<0.001), blood pressure(p<0.001), LDL cholesterol(p<0.001) showed health risk factor and myocardial infarction. Obesity assessment(p<0.001), smoking(p<0.05), blood pressure(p<0.001), glucose(p<0.001) and showed correlation between health risk factor and diabetes. Obesity assessment(p<0.001), blood pressure(p<0.001) showed correlation between health risk factor and high blood pressure. Conclusion：Therefore, we have to take one step farther after the health examination. In order to prevent and reduce the risk of disease, people have to understand their health status exactly first, and correct their habit with recognizing the amount of risk related to cardio-cerebra vascular disease.