• Economic and Environmental Geology
• /
• v.37 no.3
• /
• pp.303-309
• /
• 2004

Pyrochlores were known as promising materials for the immobilization of radioactive actinide. Accordingly, we synthesized pyrochlores with Gd$_2$Ti$_2$$O_7$ and Gd$_2$Zr$_2$$O_7$compositions by sintering method, and studied its properties and phase relations in Gd-Ti-O and Gd-Zr-O system. The mixed powders were pressed into pellets under 200-400 kgf/cm$^2$ at room temperature. and then sintered at 1000-1$600^{\circ}C$ for 0.5-40 hours. The synthesized samples were analyzed and were identified with XRD and SEM/EDS analyses. The optimal synthetic conditions of pyrochlores with Gd$_2$Ti$_2$$O_7$composition were at 140$0^{\circ}C$/0.5hrs, 130$0^{\circ}C$/3hrs and 120$0^{\circ}C$/20hrs. Its chemical composition was $Gd_{2.0-2.1}$$Ti_{1.9-2.0}$$O_7$ and similar to the stoichiometric composition without any relationship in temperature and atmosphere. The optimal synthetic conditions of pyrochlores with $Gd_{2}$$Zr_{2}$$O_7$composition were at 155$0^{\circ}C$/40hrs and 1$600^{\circ}C$/30hrs. The compositions of pyrochlore synthesized from these optimal conditions were irregular with $Gd_{1.5-2.4}$$Zr_{1.7-2.4}$$O_7$. Such heterogeneity indicates that the reaction rate of pyrochlore with Gd$_2$Zr$_2$$O_7$composition is very low, and then its equilibrium state could not be attained even for 40 hours which was the longest sintering time in this research.

• Economic and Environmental Geology
• /
• v.43 no.6
• /
• pp.555-564
• /
• 2010

Remediation process by using the bio-carrier (beads) with dead Bacillus sp. B1 and polysulfone was investigated for heavy metal contaminated groundwater. Sorption batch experiments using the bio-carrier were performed to quantify the heavy metal removal efficiencies from the contaminated solution. The analyses using SEM/EDS and TEM for the structure and the characteristic of precipitates on/inside the beads were also conducted to understand the sorption mechanism by the bio-carrier. Various amounts of freeze-dried dead Bacillus sp. B1 were mixed with polysulfone + DMF(N,N-dimethylformamide) solution to produce the bio-carrier (beads; less than 2mm in diameter) and 5% of Bacillus sp. B1 in the bio-carrier was optimal for Pb removal in the solution. The removal efficiency ratings of the bio-carrier for Pb, Cu and Cd were greater than 80% after adding 2g of bio-carrier in 50ml of aqueous solution (<10mg/L of each heavy metal concentration). Reaction time of the bio-carrier was very fast and most of the sorption reaction for heavy metals were completed within few hours. Batch experiments were duplicated at various pH conditions of aqueous solutions and Cu and Pb removal efficiencies highly maintained at wide pH ranges (pH 2-12), suggesting that the bio-carrier can be useful to clean up the acidic waste water such as AMD. From SEM/EDS and TEM analyses, it was observed that the bio-carrier was spherical shape and was overlapped by many porous layers. During the sorption experiment, Pb was crystallized on the surface of porous layers and also was mainly concentrated at the boundary of Bacillus sp. B1 stroma and polysulfone substrate, showing that the main mechanism of the bio-carrier to remove heavy metals is the sorption on/inside of the bio-carriers and the bio-carriers are excellent biosorbents for the removal of heavy metal ions from groundwater.

• Korean Journal of Animal Reproduction
• /
• v.26 no.2
• /
• pp.193-199
• /
• 2002

This study was conducted to investigate the optimal physiologic mating time in Hanwoo for protection to decrease of reproductivity and improvement of production of offspring. We observed 32 cows that were devide into 4 parts of treatment : T1(12 months of age and 0.5kg daily gain), T2(12 months of age and 0.8kg daily gain), T3(15 months of age and 0.5kg daily gain) and T4(18 months and 0.5kg daily gain). The first heat of treated cows was 263.3$\pm$6.4 days and average weight was 181.1$\pm$11.3kg. It was revealed the conception rates of first insemination were 25%(T1), 75%(T4) and number of insemination of T3 and T4(both 1.5) was lower than T1 and T2(2.3 and 2.4). In return of estrus after heifer's first parturition, they(T1, T2, T3 and T4) showed 66.2 days, 76.7 days, 62.4 days and 68.5 days respectively and the average was 65.7 days. Plasma progesterone(P4) concentration was nearly the same during the observation periods of treated cows and P4 was released just after 12 months. Only 5 cows (15.6%) in 32 were showed normal estrus cycle and ovulation before 12 months. Before and after parturition, P4 concentration was decreased fastly and then there was no detection of P4 from after parturition to 40 days after milking. P4 would be released again on 45 day after parturition. The results were summarized as that the optimal mating time of Hanwoo heifers was decided by the 14 months of age, 110 cm height and 265kg weight.

• Journal of Animal Science and Technology
• /
• v.54 no.4
• /
• pp.255-265
• /
• 2012

The objectives of this study were to investigate MC1R genotype, coat color, and muzzle phenotype variationsin the Korean native brindle cattle (KNBC) maintaining family lines and to establish the mating system for increased brindle coat color appearance. KNBC with genotype and phenotype records were selected as experimental animals. The relationship between melanocortin 1 receptor (MC1R) genotypes, verified by PCR-RFLP, and brindle coat color appearance was determined. Fragments of the MC1R gene amplified by PCR were digested with MspI and RFLP was determined. KNBC had $E^+E^+$, $E^+e$, and ee genotypes. The $E^+e$ genotype was most common with 65%, compared to $E^+E^+$ (33.33%), or ee (1.67%). When the sire had $E^+e$ genotype and the dam had $E^+E^+$ genotype, and both of them had the whole body-brindle coat color, all of their offspring (4/4) had whole body-brindle coat color. When the sire had $E^+E^+$ genotype and the dam had $E^+e$ genotype, and both had whole body-brindle coat color, 44.44% (4/9) of the offspring had whole body-brindle coat color. The mating between the sires and dams with these two genotypes with whole body-brindle coat color may have the highest whole body-brindle coat color appearance in their offspring. Muzzle grades 3 or 4 were more common than other muzzle grades. This is the first report indicating the segregation of MC1R genotypes and the inheritance of coat color through family lines in KNBC. The mating system proposed from this study may increase the possibility of brindle coat color appearance in KNBC.

• The KIPS Transactions:PartA
• /
• v.12A no.2 s.92
• /
• pp.95-102
• /
• 2005

The Newton-Raphson iterative algorithm for finding a floating point reciprocal which is widely used for a floating point division, calculates the reciprocal by performing a fixed number of multiplications. In this paper, a variable latency Newton-Raphson's reciprocal algorithm is proposed that performs multiplications a variable number of times until the error becomes smaller than a given value. To find the reciprocal of a floating point number F, the algorithm repeats the following operations: '$'X_{i+1}=X=X_i*(2-e_r-F*X_i),\;i\in\{0,\;1,\;2,...n-1\}'$ with the initial value $'X_0=\frac{1}{F}{\pm}e_0'$. The bits to the right of p fractional bits in intermediate multiplication results are truncated, and this truncation error is less than $'e_r=2^{-p}'$. The value of p is 27 for the single precision floating point, and 57 for the double precision floating point. Let $'X_i=\frac{1}{F}+e_i{'}$, these is $'X_{i+1}=\frac{1}{F}-e_{i+1},\;where\;{'}e_{i+1}, is less than the smallest number which is representable by floating point number. So, $X_{i+1}$ is approximate to $'\frac{1}{F}{'}$. Since the number of multiplications performed by the proposed algorithm is dependent on the input values, the average number of multiplications per an operation is derived from many reciprocal tables $(X_0=\frac{1}{F}{\pm}e_0)$ with varying sizes. The superiority of this algorithm is proved by comparing this average number with the fixed number of multiplications of the conventional algorithm. Since the proposed algorithm only performs the multiplications until the error gets smaller than a given value, it can be used to improve the performance of a reciprocal unit. Also, it can be used to construct optimized approximate reciprocal tables. The results of this paper can be applied to many areas that utilize floating point numbers, such as digital signal processing, computer graphics, multimedia scientific computing, etc.

• Restorative Dentistry and Endodontics
• /
• v.24 no.2
• /
• pp.399-407
• /
• 1999

Apical extrusion of canal debris is occurred inadvertently during root canal preparation and this could produce interappointment discomfort or postinstrumentation pain. The purpose of this study was to investigate the influence of canal preparation methods on the apical extrusion of canal debris by means of comparing the amounts of apically extruded debris with several kinds of instrumentation methods. In the first experiment, 40 incisors were divided into four groups of 10 each. They were instrumented using one of the four techniques: Step-back, crown-down pressureless technique with stainless steel K-files, engine-driven instrumentation with Quantec series 2000, and Profile .04 taper series 29. Root canal irrigation was done with 2.52% sodium hypochlorite solution. In the second experiment, 80 incisors were divided into five groups of 16 each and instrumented using step-back, crown-down pressureless technique with stainless steel K-files, engine-driven instrumentation such as Quantec SC, Quantec LX, and Profile .04 taper series 29 No irrigation procedure was performed in this second experiment. Extruded debris from each tooth was collected in a container and weighed by the use of an electronic balance after desiccation. With or without canal irrigation, step-back technique produced significantly more amount of apical debris than the other groups (p<0.05). However, there was no significant difference among crown-down pressureless technique, engine-driven instrumentation with Quantec LX, Quantec SC, or Profile. Therefore, either by hand or engine-driven instrumentation, it is concluded that to minimize apical debris, techniques using reaming motion of files should be applied rather than filing motion.

• Applied Biological Chemistry
• /
• v.11
• /
• pp.83-88
• /
• 1969

94 Cellulase producing strains were isoated from soils, composts, rotten woods and straws, and gastric contents and feces of herbivorous animals in various places. Among them, the strain MC-9, MC-10, MC-53 and MC-61 were found to be highly active in the degradation of carboxy methyl cellulose. Their cultural conditions adequate for the cellulase formation and effects of inorganic salts and various organic substances added to the wheat bran media were investigated. The results obtained are as follows; 1. Optimum conditions for the cellulase formation were MC-9: pH 5.5, temp. $35^{\circ}C$, incubation time 5 days, MC-10: pH 5.5-6.0, temp. $30^{\circ}C$, incubation time 5 days, MC-53: pH 3.5, temp. $30^{\circ}C$, incubation time 5 days, MC-61: pH 3.5-4.0, temp. 30-$35^{\circ}C$, incubation time 5 days. 2. Their cellulase activity in their optimum conditions were MC-9: CMC-LP(liquefying power). 87.7%, CMC-SP(saccharifying power) 3.20 glucose mg./gm. of the cultures/min., MC-10: CMC-LP 82.9%, CMC-SP 2.48 glucose mg./gm. of the cultures/min., MC-53: CMC-LP 72.4%, CMC-SP 1.76 glucose mg./gm. of the cultures/min., MC-61: CMC-LP 87.1%, CMC-SP 2.08 glucose mg./gm. of the cultures/min. 3. Additions of inorganic salts to the wheat bran media were not significant for the cellulase formation, but additions of soybean film and orange-peel pomace promoted the CMC-liquefying power 3 to 5 percent in wheat bran cultures of the strains.

• Applied Biological Chemistry
• /
• v.31 no.2
• /
• pp.169-176
• /
• 1988

Lipid contents, fatty acid compositions and free sugar contents of dried ginsengs grown for different years were studied. The lipid and free sugar were separated and quantified by silicic acid column chromatography, thin layer chromatography, gas liquid chromatography and high performance liquid chromatography. Ginseng contained $1.07{\sim}67%$ crude lipid and the hightest lipid content was shown in 3 year old root. The lipid fractions obtained by silicic acid column chromatography were mainly composed of neutral lipid$(51.35{\sim}72.30%)$. The contents of phospholipid and glycolipid in total lipids were $15.03{\sim}34.59%$ and $11.83{\sim}20.72%$, respectively. As the ginseng grew, neutral lipid content increased gradually but glycolipid decreased to the half of the one year old root. Seven components of neutral lipid separated by thin layer chromatography were identified but the other two components were not able to be identified. Triglyceride content was $14.42{\sim}23.91%$, sterol ester and unidentified material(II) were $13.58{\sim}21.26%$ and $7.13{\sim}15.83%$ respectively. The major fatty acids were linoleic acid, palmitic acid, oleic acid and linolenic acid. Linoleic acid content of total and neutral lipid was $61{\sim}65%$ palmitic acid content in phospholipid was $26{\sim}39%$ and one year old root showed the hightest contents. The fatty acid composition of neutral lipid was similar to the pattern of total lipid. Linolenic acid content of glycolipid decreased gradually. Free sugars were composed of rhamnose, fructose, glucose, sucrose, maltose and an unidentified material. The content of sucrose was $92{\sim}94%$ of total free sugars. Two year old root showed the highest sugar content and it decreased since then.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.6 no.4
• /
• pp.218-234
• /
• 2004

Recent warm winters were evaluated for a possible shifting of the northern limit for winter barley cultivation in Korea. Therefore, safe zones for winter barley cultivation were reclassified based on the average and minimum January air temperature in recent years. The results are as follows: By analysis of mean values of January average air temperatures for 30 years (1971-2000), the northern limits for safe cultivation of hulled, naked, and malting barley were Ganghwa - Icheon - Chungju - Chunyang - Goseong, Cheonan - Geumsan - Mungyeong - Andong - Sokcho, and Gwangju - Jangheung - Sancheong - Pohang - Uljin lines, respectively. Meanwhile, based on the January average air temperature of 14 years (1987-2000) with warmer winters, the safe cultivation zone of winter barley shifted northward of the normal (1971-2000). So, the northern limits for hulled, naked, and malting barley were Pocheon - Chuncheon - Wonju - Yangpyeong - Chunyang, Ganghwa - Icheon - Chungju - Uiseong - Goseong, and Gunsan - Suncheon - Jinju - Miryang - Yeongdeok - Uljin lines, respectively. Winter barley cultivars with the strongest tolerance to low temperature can be grown up to the adjacent areas of Taebaek Mountains (that is, Inje, Hongcheon, Jecheon, and Taebaek areas). Based on January mean air temperatures of 10-year return period for 30 years (1971-2000), the northern limits for hulled and naked barley were Boryeong - Namwon - Geochang - Gumi - Goseong and Seocheon - Jeongeup - Hapcheon - Yeongdeok - Sokcho lines, respectively. It ~ppears that malting barley can be cultivated only at southern coastal areas (that is, Busan, Tongyeong, Yeosu, and Wando areas). On the other hand, based on the weather conditions of 14 years (1987-2000) with warmer winters, the northern limits for hulled, naked, and malting barley were Ganghwa - Icheon - Yeongju - Goseong, Seosan - Namwon - Mungyeong - Andong - Sokcho, and Gwangju - Jangheung - Sacheon - Ulsan - Uljin lines, respectively. The northern limit for winter barley cultivars including Olbori with the strongest tolerance to low temperature was the Ganghwa - Wonju - Chungju - Chunyang - Goseong line.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2006.05a
• /
• pp.855-858
• /
• 2006

First of all, Developing information technology makes it possible to change a paradigm of all kinds of areas, including an education. Students can choose learning goals and objects themselves and acquire not the accumulation of knowledge but the method of their learning. Moreover, Teachers get to be adviser, and students play a key role in teaming. That is, the subject of leaning is students. Constructivism emphasizes the student-oriented environment of education, which corresponds to the characteristics of hypeimedia. In addition, Internet allows us to make a practical plan for constructivism. Web Based Internet provides us with a proper environment to make constructivism practice md causes an education system to change. Sure Web Based Instruction makes them motivated to learn more, they can gain plenty of information regardless of places or time. Besides, they are able to consult more up-to-date information regarding their learning use hypermedia such as an image, audio, video, and test, and effectively communicate with their instructor through a board, an e-mail, a chatting etc. A school and instructors have been making effort to develop a new model of a teaching method to cope with a new environment change. In this thesis, with 'Design and Implementation of Web Based Instruction Based on Constructivism', providing online learner-oriented and indexed video lesson, learners can get chance of self-oriented learning. In addition, learners doesn't have to cover all contents of a lesson but can choose contents they want to have from a indexed list of a lesson, and they ran search contents they want to have with a 'Keyword Search' on a main page, which can make learners improve learner's achievement.