• Water Engineering Research
• /
• 제1권1호
• /
• pp.39-48
• /
• 2000

This work was completed in partial fulfillment of an on-going research ot descover the effective management of urban nonpoint sources. The current data was obtained from the area of Shingal, Kyunni-do. The investigation was are predominant soures of storm-runoff load and drainage. As a result of the investigation, the road was found to be most seriously contaminated and a significant potential source deteriorating the quality of streams and lakes in the vicinity of the town. Thus, in could be concluded that an effective and systematic cleaning technique must be developed as soon as possible and be frequently applied to the road.

• Membrane and Water Treatment
• /
• 제1권1호
• /
• pp.61-74
• /
• 2010

This paper will integrate models at different levels (from filtration, backwashing to chemical cleaning and membrane lifetime) that can be used to minimize overall operating costs of a dead-end ultra filtration process that is used for the purification of surface water. Integration of the models leads to a multi-level optimization problem (at different levels different objectives should be reached). This problem is solved as a MINLP. Systematic modelling and optimization of membrane systems is not extensively discussed in the scientific literature. In this paper the first steps are taken in the formulation of proper models and the use of systems engineering tools to come to real optimal operating conditions. The optimized variables are used to calculate fouling profiles which can subsequently be used as inputs for a control system that actually enforces the profiles to a real pilot plant.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2006년도 추계학술대회 논문집 Vol.19
• /
• pp.362-363
• /
• 2006

Ozonized DI water was supplied to make alkaline cleaning solutions to replace SCI chemicals in a bath with and without recirculation. With recirculation, low dissolved ozone and low pH cause lower particle removal efficiency (PRE) of 75%. However, direct supply of ozonized water with $NH_4OH$ to a bath without recirculation resulted in higher PRE over 93 %.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2003년도 춘계학술대회 논문집
• /
• pp.1672-1675
• /
• 2003

In this study, we developed full automation test system for pressure vessel. This pressure vessel containing oxygen, nitrogen and carbon is widely used in industrial field. The test items of pressure vessel are divided into three branches which is weight measurement, water-hydraulic, and leakage test. After leakage test is completed, cleaning and dry progress is carried out. And control system is consist of three controller which is PLC, monitoring system and database system. PLC is control all of system. Monitoring system measures weight, pressure, flow etc and display to all conditions. Database system stores tested data. we design system to control all test modules in communication by a second period with three control modules. Finally, we verified this system by field test.

• International journal of advanced smart convergence
• /
• 제4권1호
• /
• pp.104-113
• /
• 2015

This paper focuses on a temperature effects on a PV panel which has been installed in Thailand. The main objective is cleaning PV panels and reduce temperature of PV panel by water injects from waterway and experimental results of PV power what it is difference. This project is designed by PLC control system which water injects and control PV temperature, In addition, this project consists of hardware and software such as water pump, water injection and PLC control has been automatically and it can be control system manually. The automatic control system is working when PV temperature rises up over 45 degree Celsius after that the pumping machine would inject water to the surface of PV panels and it must be stop when the PV panel temperature comes down less than 45 degree Celsius. The result of actual experimental found that the control system has been done correctly under specify condition. The experimental has been shown electrical data before and after water injects on PV system found that the electrical power a bit increases and The energy has been taken from PV panel less than energy consumption equipment of control system which taken to operate the water injecting system.

• 상하수도학회지
• /
• 제28권2호
• /
• pp.181-193
• /
• 2014

Various treatment system for residuals have applied to save water resources, but most of them were not be satisfied with legal standard consistently. In this study, submerged membrane treatment system was operated to treat water treatment plant residuals and operation parameters was evaluated. Result of this experiment, high concentration organic matters contributed to high increase Transmembrane pressure(TMP) of membrane system(from 0.05 bar to 0.35 bar). And backwash process was effective to stabilize membrane system operation. After Cleaning-In-Place(CIP), permeability was recovered about 100 % from first operation condition. Inorganic matters (Fe, Mn, Al, Ca, Mg) were not effective membrane filtration performance. The quality of residual treatment was satisfied with drinking water quality standard and a treated water from that system was suitable for water reuse.

• 한국자원식물학회지
• /
• 제19권2호
• /
• pp.204-208
• /
• 2006

콩나물의 생산과정에서 야기되고 있는 부패를 방지하기 위한 다양한 방법이 제시되고 있다. 본 연구는 물에 침종하는 수침(水浸)을 이용한 종자정선과 0.1% acetic acid에 2분간 실시한 종자소독이 콩나물의 발아와 생장, 형태 및 생산수율에 미치는 영향을 조사하고자 실시하였던 바 그 결과를 요약하면 다음과 같다. 1. 물에 뜨는 부유 종자의 비율은 5분간 물에 침종시킨 종자를 건져 40분간 aeration 시켜 다시 물에 침종시킬 경우 가장 높았다. 2. 상품으로 판매가 가능한 하배축 길이가 4cm이상의 비율은 은하콩에서는 水浸(水浸)과 acetic acid 처리간 차이가 없었던 반면, 풍산 나물콩과 준저리에서는 acetic acid 처리에 비하여 가결 수침 처리(水浸 處理)에서 높았다. 3. 세근형성 비율과 개체당 세근수는 은하콩과 준저리에서는 수침 처리(水浸 處理)에서, 풍산나물콩은 acetic acid 처리에서 상대적으로 높고 많았다. 4. 개체당 전체생계중은 은하콩과 풍산나물콩에서는 수침 처리(水浸 處理) 보다는 acetic acid 처리에서 많았던 반면. 준저리는 이와 반대의 결과를 보였다. 그러나 준저리를 이용한 대량생산 체계에서의 생산 수율은 수침(水浸)을 이용한 종자정선과 acetic acid를 이용한 종자소독간에 차이가 없었다.

• 상하수도학회지
• /
• 제30권6호
• /
• pp.725-736
• /
• 2016

There is a growing concern on the improvement of water distribution pipeline for multi-regional water supply system in Korea along with its aging infrastructure. Rehabilitation of large diameter pipeline is more efficient in cost and time compared to replacement with trenching. The procedure for rehabilitation are diagnosis, cleaning, spraying coating material, and final inspection. The internal state of pipeline was carefully diagnosed and got C grade, which required rehabilitation. We found that 17,274,787,000 Korean won could be saved after pipe surface coating because of increased C coefficient of Hazen-Williams equation. Optimal coating material was D polyurea. We also found optimal distance between spraying nozzle and pipe wall to be 70 - 80 cm, which were critical factors for coating quality. This study also illustrated the time for spray drying to be more than 30 min. These results could be used in the quality control process during rehabilitation of aged pipelines.

• 한국재료학회지
• /
• 제8권6호
• /
• pp.532-537
• /
• 1998

본 연구는 반도체 공정중 습식세정시 사용되는 초순수내에서의 오존의 거동과 오존이 주입된 초순수와 실리콘 웨이퍼와의 반응성에 대해 연구하였다. 초순수내 오존의 용해도는 주입되는 오존의 농도와 초순수의 온도가 낮을수록 증가하였고 주입되는 오존의 농도에 정비례하여 증가하였다. 초순수내 오존의 반감기는 초순수내 오존의 용해농도와 초순수의온도가 낮을수록 증가함을 나타내었고 반응차수는 약 1.5로 계산되었다. 초순수의산화환원전위(redox potential)값은 오존 주입시 5분 이내에 포화되어 일정한 값을 나타내었고 주입되는 오존의 농도가 증가함에 따라 약간 증가하였다. HF처리된 실리콘 웨이퍼는 오존이 2ppm 이상 용해된 초순수에서 세정하였을 때 1분 이내에 접촉각이 $10^{\circ}$미만의 친수성 표면을 형성하였고 piranha 세정액($H_2SO_4$과 $H_2O_2$의 혼합액)에 의해 형성된 자연산화막보다 오존이 주입된 초순수에 의해 형성된 산화막이 약간 더 두꺼움을 Spectroscopic Ellip-someter에 의해 관찰하였다. 오존의 농도가 1.5ppm에서 90초내에 계면활성제로 오염된 실리콘 웨이퍼를 piranha용액과 오존이 함유된 황산 그리고 오존이 함유된 초순수에서 세정시 오존이 함유된 초순수가 가장 탁월한 오염제거능력을 나타내었다.

• 한국화재소방학회:학술대회논문집
• /
• 한국화재소방학회 1997년도 International Symposium on Fire Science and Technology
• /
• pp.203-210
• /
• 1997

Reports of explosions in cargo and storage tanks of high flash point liquids such as residual fuel oil, asphalt, and oily waste water have shown that these explosions have occurred even when the liquid temperatures are well below the liquid nominal flash point. The reasons for these seemingly paradoxical explosions are reviewed and results of recent laboratory tests are presented to better define the conditions leading to flammable vapor atmospheres in these tanks. The potential effectiveness of various prevention measures are discussed including inerting, monitoring tank vapor concentrations, and periodic cleaning of condensation and deposits on the tank walls and roof.