• 제목/요약/키워드: In-water cleaning

검색결과 648건 처리시간 0.026초

견직물의 소목염색에서 단백질 전처리 효과 (The Effects of the Pre-treatments with Proteins on Dyeing of Silk Fabric with Caesalpinia sappan)

  • 황소희;장정대
    • 한국염색가공학회지
    • /
    • 제28권3호
    • /
    • pp.208-218
    • /
    • 2016
  • This study investigated the effects of the working mechanisms of proteins, mordants, and dyes, as well as the mordanting order, on dye uptake by silk fabric pre-treated with proteins and dyed with freeze-dried sappan wood water extract. Soybean protein and sodium caseinate were used as the proteins. 1. When Al mordants were not used, the dyeability of the fabrics increased upon protein pre-treatment as compared to the case without treatment. 2. Dyeing with protein pre-treatment, followed by mordanting, led to the highest dye uptake, and the optimal protein concentration was 5%. 3. The K/S values slightly decreased with an increase in the dyeing temperature, and the fabric turned dark red in color when dyeing was carried out at increasing temperature. Fabrics showed the highest dye uptake at $40^{\circ}C$. 4. Regarding the effect of time, the K/S values of the fabrics with and without protein treatment showed almost no increase after the initial dyeing time of 10min; further, there was hardly any difference in the cases with and without protein pre-treatment. 5. In case of protein pre-treatment fabrics, the washing fastness was level 2. The dry cleaning fastness showed very excellent result with level 4-5. The rubbing fastness was better in dry rubbing than in wet rubbing of the fabrics. For the light fastness, all dyed fabrics showed low fastness.

무용제형 저기포성 정련제의 제조에 관한 연구 (A Study on the Preparation of Solvent-Free Low Foaming Scouring Agents)

  • 근장현;김승진;함현식;박홍수
    • 공업화학
    • /
    • 제4권4호
    • /
    • pp.760-769
    • /
    • 1993
  • Polyoxyethylene(30) octadecylbenzylammonium chloride(POAC), propylene oxide와 ethylene oxide의 블럭 공중합체[p(PO-b-EO)glycol], Sedlan FF-200(FF-200) 및 polyoxyethylene(10) nonylphenyl ether의 술폰산-아민축합물 (PSAC) 등을 블렌딩하여 무용제형 저기포성 정련제 (LFSA)를 제조하였다. LFSA로서 여러 가지 물성시험을 해 본 결과 FF-200/POAC/p(Po-b-EO) glycol/PSAC/water(20g/10g/5g/5g/60g) 혼합물(LFSA-5)은 세정력, 침투력, 유화력, 알칼리 안정성 등이 양호하였으며, 수질오염에 대한 영향이 크지 않았다. LFSA-5의 정련효과는 정련전 후의 염색온도에 따른 염착률의 변화로서 확인하였는데, 정련전 PET 직물인 경우는 $70^{\circ}C$에서 4.5%의 염착률을 나타낸데 반하여, LFSA-5로서 정련된 직물은 1.3%의 염착률을 나타냄으로써 LFSA-5의 정련효과가 양호함을 알 수 있었다. 또한 LFSA-5는 Ross and Miles법에 의한 거품 생성 직후의 기포력이 포고 6mm로 나타났고, Ross and Clark법에 의한 기포력이 $30^{\circ}C$에서는 포고 300mm 이하로, $80^{\circ}C$에서는 20mm를 각각 나타내어 양호한 저기포성 정련제임이 입증되었다.

  • PDF

해저 오염 퇴적층 복원 처리를 위한 BMP 패키지 기술 개발

  • 배준홍;하문근;어경해;김승혁;박찬후;김병우;구근회;윤철원
    • 한국해양공학회:학술대회논문집
    • /
    • 한국해양공학회 2002년도 춘계학술대회 논문집
    • /
    • pp.12-16
    • /
    • 2002
  • Soil, ground water and sea bed are exposed to continuous accumulation of polluted materials causing serious environmental damage. It has been reported that such pollution causes a massive mortality of fish stock in rivers by the resuspension of toxic chemicals during strong wind conditions. Therefore, it becomes apparent that there is an immediate demand for the restoration treatment of polluted river bed (or sea bed) sediment layers. Pollution levels of major rivers and ports such as Pal-dang, Kyung-an rivers, Ma-san port are becoming public concern and are posing a serious environmental threat. In particular, the pollution of Shi-hwa river has become a nation wide issue for last few years. In spite of such public concern, the pollution level of such rivers or port are getting worse everyday. In this study, an environmentally sound engineering package is introduced which helps to restore the polluted river bed or sea bed sediments. This engineering package is consisted of a suction facility followed by a series of mechanical, chemical as well as biological treatment units. The suction facility is designed to minimize the secondary pollution due to the resuspension of toxic materials during suction. The sea bed cleaning engineering package is designed to be installed on the top of a floating barge. Such combination of environmental plant and shipbuilding technology provides a cost-effective solution, minimizing the cost involved in the transportation between suction and treatment facilities.

  • PDF

세탁세제를 위한 신규 유기 표백활성제인 Decanoyloxyethoxycarbonyloxybenzenesulfonate의 합성과 평가 (Synthesis and Evaluation of Novel Organic Bleach Activator (Decanoyloxyethoxycarbonyloxybenzenesulfonate) for Laundry Detergents)

  • 조완구;이창우;오경희
    • 공업화학
    • /
    • 제19권2호
    • /
    • pp.168-172
    • /
    • 2008
  • 오염물질을 세탁하는 과정에 있어서 보다 효과적으로 오염물질을 제거하고 표백효과를 부여하기 위해서는 기존의 계면활성제만으로는 한계가 있어 추가적으로 표백과정을 거친다. 본 논문에서는 가장 일반적으로 사용되는 표백활성화제인 TAED (tetraacetylethylenediamine)와 신규로 합성한 표백활성화제(OBA, organic bleach activator, decanoyloxyethoxycarbonyloxybenzenesulfonate)를 비교 평가하였다. 합성한 OBA의 안정성을 개선하고자 제오라이트와 폴리옥시에틸렌 글리콜을 사용하여 코팅처리 한 결과 우수한 안정성을 보였다. OBA는 저온($20^{\circ}C$)에서도 우수한 표백효과를 나타냈으며 TAED에 비하여 미생물 분해율이 88%인 물질로 OECD기준(60%) 대비 쉽게 생분해되었다. 세탁과정 중에서 무좀균이나 황색포도상구균에 대해서도 우수한 살균력을 나타내었다.

거품제염을 위한 실리카 나노입자와 CTAB (Cetyltrimethyl Ammonium Bromide)의 거품안정성 및 분리특성 평가 (Effect of Cetyltrimethyl Ammonium Bromide on Foam Stability and SiO2Separation for Decontamination Foam Application)

  • 최만수;김승은;윤인호;정종헌;최왕규;문제권;김선병
    • 방사성폐기물학회지
    • /
    • 제16권2호
    • /
    • pp.173-182
    • /
    • 2018
  • 원자력 시설 내 방사능을 포함하는 물질의 제염을 위한 방법 중 거품제염은 2차폐기기물의 양을 저감시킬 수 있는 장점을 지니고 있다. 본 연구에서는 거품안정성을 증가시킬 수 있는 실리카 나노입자를 여러가지 조건을 달리하여 합성하였다. Cetyltrimethylammonium bromide(CTAB)는 거품제염제의 거품안정성에 많은 영향을 나타내었다. 이러한 거품안정성이 향상된 이유는 제염제 내에 공기와 용액간의 계면에서 실리카 나노입자와 계면활성제의 반응으로 생각된다. 또한, CTAB는 실리카나노입자의 분리특성에서도 우수한 성능을 나타냈었다. 실리카 나노입자 분리시, CTAB의 탄화수소기에 의한 소수성과 전하중성화에 의해서 실리카 나노입자의 응집현상을 향상시켰다.

사용후 가솔린 자동차 삼원촉매의 재제조 효과 고찰 (A Study on the Remanufacturing Effect of Aged Three-Way Catalysts)

  • 곽승민;임종선;김태원;박해경
    • 공업화학
    • /
    • 제20권4호
    • /
    • pp.430-436
    • /
    • 2009
  • 가솔린 자동차 배출가스에 장기간 노출되어 활성이 저하된 폐 삼원촉매를 대상으로 재제조를 수행하였다. 재제조된 삼원촉매, 자동차 배출가스에 노출되지 않은 신촉매와 폐 삼원촉매에 대해 촉매의 물성분석과 CO, THC 및 NOx에 대한 전환활성을 측정하여 비교 분석하였다. 폐 삼원촉매의 재제조는 증류수 및 산성용액을 이용하여 초음파 세정하는 것과 세정된 촉매에 촉매의 활성성분인 Pt, Pd 및 Rh를 재함침하는 방법으로 수행하였다. 폐 삼원촉매를 재제조하는 과정에서 촉매표면에 축적되었던 각종 불순성분들이 대부분 제거 되었으나 촉매활성 성분인 Pt나 Pd 또한 함께 제거되는 것으로 판단되었다. 촉매활성 성분을 함침하여 폐 삼원촉매를 재제조 할 경우 재제조된 촉매의 활성은 신촉매의 활성보다 같거나 우수한 것으로 나타났다.

커피 추출액에 의한 직물의 염색성과 자외선 차단성 (Dyeing Properties and Ultraviolet-cut Ability of Fabrics Dyed with Coffee Bean Extracts)

  • 최인려;전미선
    • 복식문화연구
    • /
    • 제17권4호
    • /
    • pp.575-582
    • /
    • 2009
  • The coffee has been used as drink in the world and it has been using not only food but also dyeing. It can be used for four seasons in our normal living and it can be taken friendly everywhere. The coffee consists of about 8${\sim}$10% phenol(chlorogenic acid) that related to antioxidant and antimicrobial activity. However, its exact components and the dyeing property effects has not been well known yet. Therefore, the purpose of this study was to investigate the dyeing property and ultraviolet-cut ability of silk and nylon fabrics that was dyed variously with coffee extracts. Coffee extracts were done by boiling coffee with distilled water at $100^{\circ}C$ for 2 hours. As mordanting agent, we used $AlK(SO_4)_2$ $12H_2O$, $CuSO_4$ $5H_2O$, $FeCl_2$ $4H_2O$. As the result of the dyeing properties and ultraviolet-cut ability of fabrics dyed with coffee bean extracts, we can find that the optimum dyeing temperature and dyeing time of the silk and nylon fabrics dyed with coffee bean extracts was $90^{\circ}C$, 60 min. and the colorfastness of washing and dry-cleaning was improved by using mordanting agent(4${\sim}$5 grade). Ultraviolet-cut ability was showed more 90% in dyed nylon fabrics.

  • PDF

TiO2 나노입자와 3-MPTMS로 코팅 처리한 면섬유의 표면 특성과 항균성 및 광분해효과 (Surface Characteristics, Antimicrobial and Photodegradation Effect of Cotton Fibers Coated with TiO2 Nanoparticles and 3-Mercaptopropyltrimethoxysilane(3-MPTMS))

  • 박수진;이재웅;김삼수;이상오
    • 한국염색가공학회지
    • /
    • 제30권4호
    • /
    • pp.245-255
    • /
    • 2018
  • In this study, cotton fabrics were coated with $TiO_2$ nanoparticles using 3-mercaptopropyltrimethoxysilane(3-MPTMS), which is highly reactive to cotton fabrics, as a medium, and the characteristics, antimicrobial properties, and photodegradation properties of the fibers were measured. The manufacturing process is as follows. (1) 3-MPTMS was added to isopropanol, and $TiO_2$ colloid was added to the mixture to prepare a solution. (2) Cellulose fibers were immersed in the prepared $3-MPTMS/TiO_2$ solution, stirred for 90 minutes at $45^{\circ}C$ in a constant temperature water bath, and dried thereafter. In order to identify the morphology of the cellulose fibers coated with $TiO_2$ nanoparticles, the surface was observed with a scanning electron microscope(SEM), and SEM-EDS was measured to identify the adhesion of $TiO_2$ nanoparticles. The SEM images showed $TiO_2$ nanoparticle and 3-MPTMS coated layers on the fibers and it was identified that $TiO_2$ nanoparticles were attached to the cellulose fibers. The antimicrobial activity of $3-MPTMS/TiO_2$-treated cotton fabrics was measured using a bacterial reduction method. $3-MPTMS/TiO_2$ cellulose fibers which was irradiated by ultra violet light, showed antimicrobial activity against Escherichia coli(ATCC 43895) and Staphylococcus aureus(ATCCBAA-1707) unlike unirradiated fibers. The cellulose fibers were stained with methylene blue and the photodegradation performance of the stained fabrics was analyzed. The stained fabrics showed high degradation performance with photolytic reactions of $TiO_2$ nanoparticles.

폐수처리를 위한 세라믹계 나노여과막: 리뷰 (Ceramic based Nanofiltration Membrane for Wastewater Treatment: A Review)

  • 곽연수;라즈쿠마 파텔
    • 멤브레인
    • /
    • 제32권6호
    • /
    • pp.390-400
    • /
    • 2022
  • 나노여과막(NF)은 식품가공, 제약 등 폐수는 물론 지자체 하수처리시설에서 배출되는 폐수 처리에 있어 훨씬 낮은 압력으로 운용이 가능해 역삼투막(RO)보다 인기가 높다. NF막의 경우 분리 메커니즘은 투과확산 기작과 더불어 RO 박막보다 낮은 가교밀도로 인한 체거름 메커니즘이다. 막 오염은 세라믹 막과 달리 고분자 막의 경우 나노 여과 공정의 고질적인 문제 중 하나이다. 이러한 문제를 해결하기 위해 차아염소산나트륨을 사용한 멤브레인 세척이 이루어진다. 폴리머 멤브레인에 비해 세라믹 멤브레인은 이러한 화합물에 매우 안정적이다. 본 리뷰에서는 NF 프로세스에 의한 폐수 처리의 다양한 유형의 세라믹 막 적용에 대해 논의한다.

나노광촉매가 코팅된 실리카 비드의 재생 연구 (Recycling Technique of Nano TiO2-Coated Silica-bead)

  • 도영웅;하진욱
    • 한국산학기술학회논문지
    • /
    • 제10권11호
    • /
    • pp.3269-3273
    • /
    • 2009
  • 본 연구에서는 수용액 내의 오염물질 분해를 위하여 개발한 광촉매가 코팅된 실리카 비드의 광분해반응 사용에 따른 활성저하 문제를 해결하기 위하여 반응에 사용한 비드의 활성을 향상시킬 수 있는 재생 방법에 관한 실험을 수행하였다. 비드의 재생방법으로 표면 세정법을 선택하였으며, 세정액으로는 물(증류수), 계면활성제, 아세톤, 에탄올의 세정력이 서로 다른 4종의 용액을 사용하였다. 재생 과정은 서로 다른 4종의 세정액으로 반응에 사용하여 활성이 떨어진 비드를 세정한 후, 소성온도를 $100^{\circ}C$, $200^{\circ}C$, $300^{\circ}C$로 달리하여 30분간 처리하였다. 재생 처리과정은 각 1~3회 반복 수행하였으며, 서로 다른 조건에서 재생된 비드의 활성은 수용액 내의 methylene blue 광분해율로 측정하였다. 연구결과, 재생한 비드의 활성은 아세톤으로 세정한 후, $100^{\circ}C$에서 30분간 소성하였을 때 가장 우수한 것으로 나타났다.