• 한국군사과학기술학회지
• /
• 제26권2호
• /
• pp.171-178
• /
• 2023

PCM data is result of air-vehicle flight test, this data is distributed for each engineers to analyze its condition. Since line-of-sight between the air-vehicle and the ground receiver cannot always be secured, remote PCM data recording system was claimed to be required. In this paper multi-function PCM data recorder has been described. This PCM data recorder was intended to place on inside of flight object. It can record about two hours in 32 GB SD card with maximum 7 Mbps data rate. RS-422/485 and RJ-45 interface enhanced accessibility for users. 5 V and 1 A power consumption and 19.5 mm × 152.5 mm × 102.3 mm allow to connect with mobile PCM devices. It acquired more than 190-minutes data in 12-times flight test. Also, it achieved military standard environmental test MIL-STD-810G to prove its stability and solidness.

• 대한인간공학회지
• /
• 제31권2호
• /
• pp.319-325
• /
• 2012

Objective: The aim of this study was to develop the assistive device for accelerator and brake pedals using bio-signals from the prefrontal lobe in the driving simulator and evaluate its performance. Background: There is lack of assistive devices for the driving in peoples with disabilities in Korea. However, if bio-signals and/or brain waves are used at driving a car, the people with serious physical limitations can improve their community mobility. Method: 15 subjects with driver's license participated in this study for experiment of driving performance evaluation in the simulator. Each subject drove the simulator the same course 10 times in three separated groups which use different interface controllers to accelerate and brake: (1) conventional pedal group, (2) joystick group and (3) bio-signal group(horizontal quick glance of the eyes and clench teeth). All experiments were recorded and the driving performances were evaluated by three inspectors. Results: Average score of bio-signal group for the driving in the simulator was increased 3% compared with the pedal group and was increased 9% compared with the joystick group(p<0.01). The subjects using bio-signals was decreased 44% in number of deduction compared with others because the device had the built-in modified cruise control. Conclusion: The assistive device for accelerator and brake pedals using bio-signals showed significantly better performance than using general pedal and a joystick interface(p<0.01). Application: This study can be used to design adaptive vehicle for driving in people with disabilities.

• 방송공학회논문지
• /
• 제20권6호
• /
• pp.928-937
• /
• 2015

기존의 헤드업 디스플레이는 작은 허상 크기로 인하여 운전자가 영상 정보를 쉽게 인식할 수 없는 어려움을 가지고 있기 때문에, 본 연구에서는 수평 방향으로 영상을 넓히는 다중 화면 구조와 컴바이너 렌즈를 사용하여 영상 확대와 다채널 윈도우 구조의 헤드업 디스플레이를 연구하였다. 0.47inch 크기의 LCD를 사용하여 투과와 반사 기능의 허상 영상을 사람의 눈에서 3m 위치에 구현하는 기술을 연구하여 근거리와 원거리의 물체에 대한 운전자의 인지 시간을 짧게 하였다. 허상 영상의 콘텐츠로는 스마트 폰을 이용하여 다양한 내비게이션 정보 등을 디스플레이 할 수 있도록 하여 안전과 정보를 동시에 제공할 수 있도록 하였다.

• 한국정밀공학회지
• /
• 제27권8호
• /
• pp.20-27
• /
• 2010

A precise evaluation of the contact position and the distribution of contact pressure in a wheel-rail interface analysis is one of the most important procedures to predict fatigue life and wear of wheel and rail. This paper presents the analysis result of finite element method(FEM) to investigate how the deformation of a wheelset, which is the assembly of wheel and axle of a railroad vehicle, affect the contact analysis of wheel and rail. 3D-FEM was used to analyze three contact models; a model with only wheel, a model with wheelset, and a model with simplified wheel and rail geometry. The analysis result of the contact position and the distribution of contact pressure are discussed. It is shown that the analysis results of a model with wheelset represent largest value with respect to contact pressure and contact stress. Furthermore, it is found that the distribution of contact pressure and the contact position is highly affected by the deformation of wheel and axle. It is concluded that the deformation of axle should be considered to evaluate the exact contact parameters in a wheel-rail contact analysis.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2007년도 제28회 춘계학술대회논문집
• /
• pp.193-196
• /
• 2007

KSLV-I은 100 kg급의 인공위성체를 지구 저궤도에 진입시키는 국내 최초의 우주발사체이다. 이 우주발사체는 2단으로 구성되어 있으며, 고체 추진기관인 2단은 순수 국내 기술로 설계, 제작 및 인증시험을 통하여 임무를 수행하게 된다. KM의 연소관은 중량의 감소와 성능의 증대를 위하여 체결을 위한 구조체를 제외하고 복합재료를 사용하여 제작하였다. 연소관의 제작 공정인 내열재, 필라멘트 와인딩, 각종 인터페이스 체결을 위한 구조물의 조립 공정 등에 대하여 논하고자 한다.

• 한국표면공학회지
• /
• 제39권6호
• /
• pp.302-311
• /
• 2006

Nowadays the open-type lead-acid battery for vehicle use is being replaced with the sealed-type because it needs no maintenance and has a longer cycle life. Thus researches on this battery are being conducted very actively by many advanced battery companies. There is, however, a serious problem with the maintenance free(MF) battery that its cathode electrode has a limited cycle life due to a corrosion of grid. In this study, it was aimed to improve a corrosion resistance of the cathode grid which is commonly made of Pb-Ca alloy for a mechanical strength. For this purpose, various amounts of alloying elements such as Sn, Ag and Ba were added singly or together to the Pb-Ca alloys and investigated their corrosion behaviors. Batteries fabricated by using these alloys as cathode grids were subjected to life cycle test and their corrosion layers appeared at the interface between the grids and the active materials were carefully observed in order to clarify effects of alloying elements.

• 항공우주시스템공학회지
• /
• 제16권6호
• /
• pp.74-80
• /
• 2022

소형 드론은 활용분야가 다양해지고 있으며 특히 군에서는 전장에서 정찰 및 특수목적 용도로 활용 가능한 드론 체계가 요구되고 있다. 본 연구에서는 군용 무인기의 표준 인터페이스인 STANAG 4586을 멀티콥터 형태의 소형 드론에 적용하여 군용 체계 적합성을 검토하고자 하였다. 이를 위해 소형 멀티콥터 비행체, 통합비행제어컴퓨터, 지상통제장치, 데이터링크를 설계/제작하고, STANAG 4586 인터페이스를 적용한 비행제어 소프트웨어와 지상통제장비 소프트웨어를 개발하여 HILS 시험과 비행시험을 수행하였다.

• 한국산업융합학회 논문집
• /
• 제22권6호
• /
• pp.703-709
• /
• 2019

This paper proposes a monitoring and remote control system, an essential part of In Vehicle Infotainment (IVI) and Human Vehicle Interface (HVI) to provide safety and convenience to a driver. The system utilizes Bluetooth for a short range communication and utilizes WCDMA for a long range communication to enhance efficiency. In this paper, an integrated controller, which integrates a CAN communication module, a Bluetooth communication module, a WCDMA communication module, is designed to control a car. Also, a remote server for managing data is designed to provide real-time monitoring and remote control for a user via smart devices. Experiment results show that all the proposed remote control, driving log, real-time monitoring, and diagnostics functions are working properly. With the proposed system, a driver can drive safely by monitoring and inspecting a car before driving via smart devices, and control conveniently by controlling a car remotely.

• 한국군사과학기술학회지
• /
• 제27권1호
• /
• pp.70-79
• /
• 2024

This paper describes the results of the development of the the unmanned aerial vehicle system integration laboratory(UAV SIL) for the integrated verification. This UAV SIL is designed to test the robustness of the UAV system including the operational logics and the flight control system behaviors under many abnormal and emergency conditions such as data-link losses, airborne subsystem failures, engine shut down conditions, and ground control station faults. This paper presents how to build the UAV SIL and how to verify the in-development UAV system through the UAV SIL.

• 한국정보통신학회논문지
• /
• 제20권12호
• /
• pp.2235-2242
• /
• 2016

연료전지 기반의 전력시스템이 선박 및 해양플랜트에 다양한 형태로 적용되고 있다. 특히, 연료전지와 배터리를 연계한 토폴로지에 관한 하이브리드 전력시스템에 관한 연구가 활발히 이루어지고 있다. 이러한 연료전지 기반의 하이브리드 선박은 개발 초기 단계로 통합 모니터링 시스템에 연구가 이루어지고 있지 않다. 본 논문에서는 통합 모니터링 시스템을 연구하여 하이브리드 연료전지 선박의 안정적인 운항 및 운항자 편리성을 높이고자 한다. 연료전지 선박의 통합 모니터링 시스템은 사용자 편의성 및 선박 운항 안정성을 고려하여 GUI(Graphic User Interface)기반으로 구성하였으며, 선박 주요장비와 통신 및 하드와이어 신호로 연동되어 선박의 상태를 실시간으로 확인할 수 있도록 한다. 수집된 데이터는 저장하여 추후 운항자가 선박 운항 상태를 확인할 수 있도록 구현하였다.