• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2003.06a
• /
• pp.1067-1070
• /
• 2003

In this paper, we present a remote measurement system for the wireless monitoring of ECU Sensor Signals of vehicle. In order to measure the ECU sensor signals, the interface circuit is designed to communicate ECU and designed terminal wirelessly according to the ISO, SAE regulation of communication protocol standard. A micro-controller 80C196KC is used for communicating ECU sensor signals. ECU sensor signals are transmitted to the RF-wireless terminal that was developed using the micro controller 80386EX. LCD, and RF-module. 80386EX software is programmed to monitor the ECU sensor signals using the Borland C++ compiler in which the half duplex method was used for the RS232 communication. The algorithms for measuring the ECU sensor signals are verified to monitor ECU state. At the same time, the information to fix the vehicle's problem can be shown on the developed monitoring software. The possibility for remote measurement of ECU sensor signals using 80386EX is also verified through the developed systems and algorithms.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.7
• /
• pp.275-282
• /
• 2018

Mountain trams are an environmental-friendly transportation system that run wirelessly on an embedded track constructed on previous mountain roads, and can run despite the frozen road. On the other hand, there is some difficulty on sharp and steep tracks. In this study, after possible technical problems were defined in mountain trams running on a sharp and steep track, the design solutions for the interface structure of bogie and carbody were proposed. In addition, a prototype was made and its performance was tested to verify the solutions. Because the difference in the distance of the inner and outer rails on a sharp curve is severe enough to interrupt running, independent rotating wheels with different angular speeds were developed and applied. To prevent derailment due to the large attack angle and lateral force caused by the previous vehicle of 2bogie-and-1carbody on the sharp curve, a vehicle with 1bogie-and-1carbody was designed and applied. A prototype vehicle of 1bogie-and-1carbody with independent rotating wheels was made to improve the performance during the test running on a small track. A coupler was designed to absorb the large rotations of 3 degrees-of-freedom between the carbodies of a mountain tram running on the steep curved track. After a small scale prototype was made, the performance was verified by a function test.

• Journal of the Ergonomics Society of Korea
• /
• v.30 no.5
• /
• pp.589-595
• /
• 2011

Objective: This study compares two visual occlusion methods for the evaluation of in-vehicle interfaces. Background: Visual occlusion is a visual demand measuring technique which uses periodic vision/occlusion cycle to simulate a driving(or mobile) environment. It has been widely used for the evaluation of in-vehicle interfaces. There are two major implementation methods for this technique: (1) occlusion using PLATO(portable liquid crystal apparatus for tachistoscopic occlusion) goggles; (2) occlusion using a software application on a touchscreen device. Method: An experiment was conducted to examine the visual demand of an in-vehicle interface prototype using the goggle-based and the touchscreen-based occlusion methods. Address input and radio tuning tasks were evaluated in the experiment. Results: The results showed that, for the radio tuning task, there were no significant differences in total shutter open time and resumability ratio between the two occlusionconditions. However, it took longer for the participants to input addresses with the touchscreen-based occlusion. Conclusion & Application: The results suggest that touchscreen-based method could be used as an alternative to traditional, gogglebased visual occlusion especially in less demanding visual tasks such as radio tuning.

• Journal of IKEEE
• /
• v.18 no.3
• /
• pp.435-441
• /
• 2014

The V2X cooperative communication system is fusion technology which makes vehicle manuver safer. To evaluate and anticipate effect of these kind of technology, it requires real-car based road construction, implementation of communication devices, hiring inspection specialized personnel. For this reason, many laboratories and universities experience difficulties to test their technology results. Also, the need of implementing reliable testbed for testing vehicle safety applications and V2X communication technology is increasing as V2X device development is being accelerated. In this paper, we implemented a system which synchronizes traffic and network simulators via developing External interface to set simulation based testing environment in order to solve the difficulties.

• Journal of Adhesion and Interface
• /
• v.7 no.4
• /
• pp.60-64
• /
• 2006

In modern vehicle construction the search for means of weight reduction, improving durability, increasing comfort and raising body stiffness are issues of priority to the design engineer. The intelligent usage of many materials such as high strength steel, light-alloys and plastics enables a significant vehicle weight reduction to be achieved. The classical joining techniques used in the automobile industry need to be newly-evaluated since they often do not present workable solutions for such mixed-material connections, for example aluminium/steel. Calculation/simulation methods have made progress as a key factor for broader and more cost-effective implementation of structural bonding. This will lead to reduction of spotwelds and accelerate the car development. A special focus of the paper is the use of high strength steel grades. It will be shown that adhesive bonding is a key tool for yielding the potential of advanced high strength steel for low gauging without compromising the stiffness. The latest status of adhesive development has been described. Improvements with physical strength and glass temperature as well as of process relevant properties are shown. Also the situation regarding occupational hygiene is treated, showing that by further spotweld point reduction the emission around the working area can be even lowered against the current praxis. High performing lightweight design cannot longer do without high performing crash durable adhesives.

• Proceedings of the KIEE Conference
• /
• 2002.11d
• /
• pp.372-374
• /
• 2002

In this paper, we studied for performance of traction and braking for on-line test and evaluation of korean high speed rail vehicle. It is composed of 6 DAMs(Data Acquisition Modules), 2 monitoring modules and 1 main computer. The software should set and control the hardware of the measuring system, perform the analysis and calculation of measuring data and interface between users and the measuring system. As a result, It has been shown a good performance of traction and braking for test vehicle.

• International Journal of Automotive Technology
• /
• v.8 no.2
• /
• pp.203-209
• /
• 2007

As the vehicle electronic control technology quickly grows and becomes more sophisticated, a more efficient means than the traditional in-vehicle driving test is required for the design, testing, and tuning of electronic control units (ECU). For this purpose, the hardware-in-the-loop simulation (HILS) scheme is very promising, since significant portions of actual driving test procedures can be replaced by HIL simulation. The HILS incorporates hardware components in the numerical simulation environment, and this yields results with better credibility than pure numerical simulations can offer. In this study, a HILS system has been developed for ESP (Electronic Stability Program) ECUs. The system consists of the hardware component, which that includes the hydraulic brake mechanism and an ESP ECU, the software component, which virtually implements vehicle dynamics with visualization, and the interface component, which links these two parts together. The validity of HIL simulation is largely contingent upon the accuracy of the vehicle model. To account for this, the HILS system in this research used the commercial software CarSim to generate a detailed full vehicle model, and its parameters were set by using design data, SPMD (Suspension Parameter Measurement Device) data, and data from actual vehicle tests. Using the developed HILS system, performance of a commercial ESP ECU was evaluated for a virtual vehicle under various driving conditions. This HILS system, with its reliability, will be used in various applications that include durability testing, benchmarking and comparison of commercial ECUs, and detection of fault and malfunction of ESP ECUs.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2003.06a
• /
• pp.168-171
• /
• 2003

As vehicles are more intelligent for convenience and safety of drivers, the in-vehicle networking systems and smart modules are essential components for intelligent vehicles. However, for the smart module to widely apply to the IVN systems, two problems are considered as follows. Firstly, because it is very difficult that transducer manufacturers developed the smart module that supports the existing all IVN protocols, the smart module must be independent to the type of networking protocols. Secondly, when the smart module is exchanged due to its failure, it is necessary how the transducer is only exchanged without exchange of the microprocessor and network transceiver. This paper deals with the IEEE 1451 based smart module that describes the digital interface between a network transceiver and sensor module. Finally. efficiency of the IEEE 1451 based smart module was evaluated on the experimental model.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.23 no.1
• /
• pp.49-55
• /
• 2015

In this study, among in various scenarios of the duration degradation of the fuel cell, countermeasures for the cathode carbon carrier oxidation and the deactivation of catalyst by hydrogen / air interface formation have been studied. so the system was applied to the air cutoff valve. In terms of the component, the cold start performance, electrical stability, the airtight performance were mainly designed and their performance was confirmed. And in terms of the system, the air electrode flow is blocked off, so the oxygen concentration drops when system is powered off, As a result, By reducing unit cell voltage which affect the durability of the fuel cell reached up to 0.8V, the improved durability of the fuel cell was confirmed.

• Journal of the Ergonomics Society of Korea
• /
• v.31 no.4
• /
• pp.577-583
• /
• 2012

Objective: This paper describes the process and results related to the development of gesture recognition-based natural user interface(NUI) for vehicle maintenance e-Training system. Background: E-Training refers to education training that acquires and improves the necessary capabilities to perform tasks by using information and communication technology(simulation, 3D virtual reality, and augmented reality), device(PC, tablet, smartphone, and HMD), and environment(wired/wireless internet and cloud computing). Method: Palm movement from depth camera is used as a pointing device, where finger movement is extracted by using OpenCV library as a selection protocol. Results: The proposed NUI allows trainees to control objects, such as cars and engines, on a large screen through gesture recognition. In addition, it includes the learning environment to understand the procedure of either assemble or disassemble certain parts. Conclusion: Future works are related to the implementation of gesture recognition technology for a multiple number of trainees. Application: The results of this interface can be applied not only in e-Training system, but also in other systems, such as digital signage, tangible game, controlling 3D contents, etc.