• 제목/요약/키워드: In-situ application

검색결과 566건 처리시간 0.022초

자동 인장 장치에 의한 압축 분산형 앵커의 적용성 (Application of Compression dispersion Anchor Using Auto back Equipment)

  • 이송;박상국;정용은;이성원
    • 한국철도학회:학술대회논문집
    • /
    • 한국철도학회 2004년도 추계학술대회 논문집
    • /
    • pp.994-1000
    • /
    • 2004
  • It is growing the application of the removal ground anchor with tension force for earth retaining constructions in the downtown. Nowadays, we can find the compression dispersion anchor on many site. But, it is occur some probelems in behabior of anchors because of impossible to tense p.c strand uniformly with existing equipment due to different length of p.c strand. So we tried to tense each p.c strand uniformly with auto back equipment in-situ test. This study compared and analyzed in-situ test results of an existing equipment with those of auto back equipment by appling elastic theory. As a result of the test, It has been proved that differences of tension force in the existing equipment increases with increasing the number of p.c strands. This can cause the ultimate failure of the concentrated p.c strand and the shear failure of ground. So it has been proved that auto back equipment is necessary.

  • PDF

붕괴사면보강을 위한 Soil Nailing의 적용성에 관한 연구 (Study of Soil Nailing Application as a Reinforcement Method for Slided Slope)

  • 이성철;김명학
    • 한국지반공학회:학술대회논문집
    • /
    • 한국지반공학회 2000년도 가을 학술발표회 논문집
    • /
    • pp.127-134
    • /
    • 2000
  • Soil nailing is in-situ ground improvement technique of reinforcing soils using passive inclusions for the purpose of slope stability. Also soil nailing, in general, was used and studied as a reinforcement technique at cut slope, but this paper presents the results of study for soil nailing application as a reinforcement technique at the banking over slided slope. In-situ pull-out tests of nails, instrumented with strain gauges, were performed to investigate the maximum pull-out load and to calculate the unit side resistance in each different layer. And the apparent average unit side resistance of this study was compared with that of other sites installed at cut slope.

  • PDF

'Image-mapping' in-situ U-Pb 탄산염광물 연대측정법의 원리 및 적용 (Principle and Application of 'Image-mapping' in-situ U-Pb Carbonate Age-dating)

  • 김하;홍성식;박채원;오지혜;김종욱;송윤구
    • 자원환경지질
    • /
    • 제56권2호
    • /
    • pp.115-123
    • /
    • 2023
  • 본 연구는 Drost et al. (2018)이 제안한 LA-ICP-MS를 이용한 새로운 'image-mapping' in-situ U-Pb 연대측정법을 소개하고, 국내 전기고생대 조선누층군 시료를 대상으로 처음 적용하여 결정한 절대연대 결과 사례를 통해 이 방법의 특성과 활용성을 알리고자 한다. 탄산염광물을 대상으로 하는 'image-mapping' in-situ U-Pb 연대측정법은 미세조직 관찰을 기초로 미소영역의 'image-mapping' 법을 적용하여, 기존의 점 분석(spot analysis) in-situ 분석법과는 달리, 신뢰성 높은 절대연대를 결정할 수 있을 뿐 아니라, 생성 이후 일어난 복수의 지질학적 '사건' 절대연대도 결정할 수 있다. 막골층과 대기층 탄산염광물로부터 퇴적연대와 함께 복수의 퇴적 이후의 연대를 결정한 적용 사례에서 이를 확인하였다. 따라서 이 같은 'image-mapping' in-situ U-Pb 연대측정법이 전 지질시대에 걸쳐 다양한 지질학적 환경에서 존재하는 다양한 형태의 탄산염광물 절대연대 결정에 적용된다면, 새로운 지질학적 연대정보 확보가 가능할 것이다.

An Application of Powerful Ultrasound to Rubber Processing : in-situ Compatibilization of Rubber Blends

  • Hong, Chang-Kook
    • 고무기술
    • /
    • 제7권1호
    • /
    • pp.8-16
    • /
    • 2006
  • Plastic/rubber blends are ultrasonically treated during continuous extrusion in order to investigate the in-situ compatibilization of the blends without any chemicals. The mechanical properties of each blend were significantly improved by ultrasonic treatment. It is believed that ultrasonic treatment of the blends enhances intermolecular interaction, improves adhesion at the interface and creates copolymers during very short time. The created copolymers are believed to be a major reason for enhancing mechanical properties of the blends by in-situ compatibilization during extrusion. This process can be applied fur preparing plastic/rubber blends to make thermoplastic elastomers or plastic/plastic and rubber/rubber blends, and for making novel copolymers from practically any pairs of existing polymers to achieve desirable chemical and physical properties.

  • PDF

Reduction of Trimethylamine Off-Odor by Lactic Acid Bacteria Isolated from Korean Traditional Fermented Food and Their In Situ Application

  • Park, Seul-Ki;Jo, Du-Min;Yu, Daeung;Khan, Fazlurrahman;Lee, Yang Bong;Kim, Young-Mog
    • Journal of Microbiology and Biotechnology
    • /
    • 제30권10호
    • /
    • pp.1510-1515
    • /
    • 2020
  • Trimethylamine (TMA) is a well-known off-odor compound in fish and fishery products and is a metabolic product of trimethylamine N-oxide (TMAO) generated by the enzymatic action of microorganisms. The off-odor is a factor that can debase the value of fish and fishery products. The present study aimed to remove TMA using lactic acid bacteria (LAB). A total of fifteen isolates exhibiting the TMA reduction efficacy were isolated from Korean traditional fermented foods. Among these isolates, five LAB isolates (Lactobacillus plantarum SKD 1 and 4; Lactobacillus paraplantarum SKD 15; Pediococcus stilesii SKD 11; P. pentosaceus SKD 14) were selected based on their high TMA reduction efficacy. In situ reduction of TMA efficacy by the LAB cell-free supernatant was evaluated using a spoiled fish sample. The results showed effective TMA reduction by our selected strains: SKD1 (45%), SKD4 (62%), SKD11 (60%), SKD14 (59%), and SKD15 (52%), respectively. This is the first study on TMA reduction by the metabolic activity of LAB and in situ reduction of TMA using cell-free supernatant of LAB. The present finding suggests an economically useful and ecofriendly approach to the reduction of TMA.

Ecobiotechnology of Marine Sponges and Their Symbionts - Review and Present Status

  • Pallela, Ramjee;Kim, Se-Kwon
    • 한국해양바이오학회지
    • /
    • 제5권4호
    • /
    • pp.15-25
    • /
    • 2011
  • Marine sponges are a rich source of highly diversified bioactive compounds. These medicinally valuable molecules represent extreme physiological and ecological functions in sponges, more presumably involving in the resistance to the feeding by other marine organisms like fish and fouling by barnacles, bacteria, fungi, etc. This feature of attaining resistance made sponges as successful poriferans that possess an impressive array of biological properties ranging from antimicrobial to anticancerous activities. The diversified bioactive principle of sponges might be due to their spacio-temporal distribution and although, the gateway for exploiting the sponges for isolating these distinct, potential molecules is open, suitable technical and methodological approaches are yet to be implemented in order to bring the sponges as successful pharmaceutical leads in the field of marine biotechnology. Despite of the identified difficulties of marine sponge research from past few decades, one should concentrate not only on the basic and applied technical/methodological considerations, but also on the novel strategies like in vitro sponge cell, fragment and whole sponge culture; sponge symbiont cell culture; in situ and ex situ sponge cultivation; and sponge bioreactors and metagenomic approaches, for the successful exploitation of marine sponges towards the novelty in sponge biotechnology. The present review narrates the pros and cons of the nowadays-marine sponge research by focusing on the suggestive ecobiotechnological approaches, based on the latest studies for feasible ecological exploitation and biotechnological application of sponges from the sea.

LISST-100과 ADCP를 이용한 광양만 현장 부유입자물질 특성 연구 (Characteristic of In Situ Suspended Particulate Matter at the Gwangyang bay Using LISST-100 and ADCP)

  • 이병관;김석윤
    • 한국환경과학회지
    • /
    • 제18권11호
    • /
    • pp.1299-1307
    • /
    • 2009
  • In order to measure in-situ suspended particle size, volume concentration of suspended particulate matter and current speed, mooring observation was performed at the Gwangyang Bay by using of an optical instrument, 'LISST-100' and an acoustic instrument, 'ADV'(St. S1). And the sediment flux was obtained based on the concentration of suspended particulate matter and current speeds measured at three lines of Gwangyang Bay during ebb and flood tide of August 2006. To investigate the spatial variation of suspended particulate matter, profiling observations were measured difference echo intensity and beam attenuation coefficient by using of ADCP and Transmissometer (Line A, B, C). The suspended sediment flux rate at the mouth of Gwangyang Bay was observed to be higher during asymmetrical than symmetrical of current speeds. The flux of suspended particulate matter concentration and current speeds were transported to southeastern direction of surface layer and northwestern direction of bottom layer at the western area at line A of Gwangyang Bay. Small suspended particles have been found to increase attenuation and transmission more efficiently than similar large particles using acoustic intensity (ADV/ADCP) or optical transmit coefficient (LISST-100/Transmissometer). The application and problems as using optical or acoustic instruments will be detected for use in time varying calibrations to account for non-negligible changes in complex environments in situ particle dynamics are poorly understood.

CaCO3 첨가법에 따른 재생 ONP의 특성변화 (Differences in Characteristics of Recycled ONP for CaCO3 Adding Techniques)

  • 안영준;남성영;엄남일;안지환;한춘
    • 한국세라믹학회지
    • /
    • 제51권2호
    • /
    • pp.97-102
    • /
    • 2014
  • In order to improve the refresh rate of old newspaper(ONP), PCC shape-controlling experiments were carried out. The effect of a PCC polymorph on improving the quality of old newspaper was studied for a transformation from waste paper to eco-friendly paper. The synthesis of PCC consists of an in-situ process and a loading process to enhance the refresh rate of old newspaper. The characteristics between the in-situ process and the loading process could be analysed by SEM analyses of coated fiber surfaces. The retention rate ranges from 65 to 67% after the application of the in-situ process, and that after the loading process ranges from 55 to 58%. The retention rates thus show a difference of about 7-10%. In addition, the whiteness and ERIC characteristics of the in-situ process gave more efficient results than those of the loading process.