• 한국도로학회논문집
• /
• 제3권1호
• /
• pp.165-176
• /
• 2001

줄눈콘크리트포장의 줄눈은 온도 및 습도변화에 기인하여 발생하는 슬래브내에 무작위하게 발생하는 균열을 제어할 목적으로 설계된다. 이러한 인위적인 균열 (줄눈)은 자연발생적인 균열에 비하여 줄눈채움, 하중전달장치등의 보호대책을 강구하는 것이 용이하다는 장점을 가지고 있다. 줄눈채움의 잠재적인 이점은 표면수의 하부층으로의 침투로 인한 하부층의 약화 및 비압축성 물질 (작은 입자위 골재)의 줄눈내에 끼어듦으로 인한 스폴링을 방지하는데 있다. 합리적인 줄눈 채움의 설계를 위해서는 줄눈폭의 변화 (줄눈의 수평 움직임)의 산정이 중요한 입력요소이다. LTPP SMP 연구에 포함된 16개의 줄눈콘크리트포장의 줄눈의 수평움직임에 대한 장기 현장계측자료를 토대로 상당수의 줄눈에서 수평움직임을 허용하지 않고 있다는 것이 밝혀진바 있다. 이러한 현상을 줄눈잠김이라고 한다. 줄눈잠김이 발생하는 원인은 설계상에 계획된 줄눈부의 균열이 발생하지 않기 때문이라고 추정된다. 본 연구에서는 임의의 줄눈콘크리트포장에서 줄눈잠김의 비율을 예측할 수 있는 모델을 제시하였고 줄눈 잠김이 포장체의 성능에 미치는 영향을 조사하였다.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2005년도 지반공학 공동 학술발표회
• /
• pp.320-329
• /
• 2005

The use of diverse methods for the retaining system has been continuously increased in order to maintain the stability during excavation. However, ground anchor system occasionally may have the restriction in urban excavation sites nearby the existing structures because of space limitation. In this case, soil nailing system with relatively short length of nails could be efficiently useful as an alternative method. The general soil nailing support system, however, may result in excessive deformations particularly in excavating the zone of weak soils or nearby the existing structures. Therefore, applying the pretension force to the soil nails then could play important roles to reduce deformations mainly in an upper part of the nailed-soil excavation system as well as to improve the local slope stability. In this study, a newly modified soil nailing technology named as the PSN(Pretention Soil Nailing) is developed to reduce both facing displacements and ground surface settlements during top-down excavation process as well as to increase the global slope stability. Up to now, the PSN system has been investigated mainly focusing on an establishment of the design procedure. In the present study, the field tests including pull-out tests were fulfilled to investigate the behavior of characteristics for PSN system. All results of tests were also analyzed to provide a fundamental and efficient design.

• Ocean and Polar Research
• /
• 제35권1호
• /
• pp.15-26
• /
• 2013

The toxic, Harmful Algal Blooms (HABs) caused by the Cochlodinium polykrikoides have a serious impact on the coastal waters of Korea. In this study, the acoustic detection system was developed for rapid HABs detection, based on the acoustic backscattering properties of the C. polykrikoides. The developed system was mainly composed of a pulser-receiver board, a signal processor board, a control board, a network board, a power board, ultrasonic sensors (3.5 and 5.0 MHz), an environmental sensor, GPS, and a land-based control unit. To evaluate the performance of the system, a trail was done at a laboratory, and two in situ trials were conducted: (1) when there was no red tide, and (2) when there was red tide. In the laboratory evaluation, the system performed well in accordance with the number of C. polykrikoides in the received level. Second, under the condition when there was no red tide in the field, there was a good correlation between the acoustic data and sampling data. Finally, under the condition when there was red tide in the field, the system successfully worked at various densities in accordance with the number of C. polykrikoides, and the results corresponded with the sampling data and monitoring result of NFRDI (National Fisheries Research & Development Institute). From the laboratory and field evaluations, the developed acoustic detection system for early detecting HABs has demonstrated that it could be a significant system to monitor the occurrence of HABs in coastal regions.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2006년도 Proceedings of ISRS 2006 PORSEC Volume I
• /
• pp.471-474
• /
• 2006

Several planktonic dinoflagellates, including Cochlodinium polykrikoides (p), are known to produce red tides responsible for massive fish kills and serious economic loss in turbid Northwest Pacific (Korean and neighboring) coastal waters during summer and fall seasons. In order to mitigate the impacts of these red tides, it is therefore very essential to detect, monitor and forecast their development and movement using currently available remote sensing technology because traditional ship-based field sampling and analysis are very limited in both space and temporal frequency. Satellite ocean color sensors, such as Sea-viewing Wide Field-of-view Sensor (SeaWiFS), are ideal instruments for detecting and monitoring these blooms because they provide relatively high frequency synoptic information over large areas. Thus, the present study attempts to evaluate the red tide index methods (previously developed by Ahn and Shanmugam et al., 2006) to identify potential areas of red tides from SeaWiFS imagery in Korean and neighboring waters. Findings revealed that the standard spectral ratio algorithms (OC4 and LCA) applied to SeaWiFS imagery yielded large errors in Chl retrievals for coastal areas, besides providing false information about the encountered red tides in the focused waters. On the contrary, the RI coupled with the standard spectral ratios yielded comprehensive information about various ranges of algal blooms, while RCA Chl showing a good agreement with in-situ data led to enhanced understanding of the spatial and temporal variability of the recent red tide occurrences in high scattering and absorbing waters off the Korean and Chinese coasts. The results suggest that the red tide index methods for the early detection of red tides blooms can provide state managers with accurate identification of the extent and location of blooms as a management tool.

• 한국환경농학회:학술대회논문집
• /
• 한국환경농학회 2009년도 정기총회 및 국제심포지엄
• /
• pp.93-115
• /
• 2009

There are growing public concerns over crop and food safeties due to the elevated levels of heavy metals grown in contaminated soil. Heavy metals are classified as the chemical harmful risks for crop and food safety. With implementation of GAP, crop safety is controlled by many regulatory options for soil, irrigation water and fertilizers. Any attempt to retard the metal uptake by crops may be the best protocol to secure crop and food safety. This article reviews the management strategies for heavy metals in view of crop safety in Korea and demonstrates results from the field experiments to retard metal translocation from soil to crops by using chemical amendments and soil layer management methods. Major source of soil pollution by heavy metals has been related with mining activities. Risk assessment revealed that rice consumption and groundwater ingestion in the abandoned mining areas were the major exposure pathways for metals to human and the heavy metal showed the toxic effects on human health. Chemical amendments such as lime and slag retarded Cd uptake by rice (Oryza sativa L.) by increasing soil pH, lowering the phytoavailable Cd concentration in soil solution, immobilizing Cd in soil and converting the available Cd fractions into non-available fractions. The soil layer management methods decreased the Cd uptake by 76% and Pb by 60%. Either reversing the surface layer with subsurface layer or immobilization of metals with layer mixing with lime was considered to be the practical option for the in-situ remediation of the contaminated paddy soils. Combination of chemical soil amendments and layer management methods was efficient to retard the metal bioavailability and thus to secure crop safety for heavy metals. This protocol seems to be cheap, relatively easy to practice and practical in the agricultural fields. However, a long term monitoring work should be followed to verify the efficiency of this protocol.

• Geomechanics and Engineering
• /
• 제14권3호
• /
• pp.211-224
• /
• 2018

In this paper, a predictive method accounting for the scaling effects of rockfill materials in the numerical deformation analysis of rockfill dams is developed. It aims to take into consideration the differences of engineering properties of rockfill materials between in situ and laboratory conditions in the deformation analysis. The developed method is based on the modification of model parameters used in the chosen material model, which is, in this study, an elasto-plastic model with double yield surfaces, i.e., the modified Hardening Soil model. Datasets of experimental tests are collected from previous studies, and a new dataset of the Nam Ngum 2 dam project for investigating the scaling effects of rockfill materials, including particle size, particle gradation and density, is obtained. To quantitatively consider the influence of particle gradation, the coarse-to-fine content (C/F) concept is proposed in this study. The simple relations between the model parameters and particle size, C/F and density are formulated, which enable us to predict the mechanical properties of prototype materials from laboratory tests. Subsequently, a 3D finite element analysis of the Nam Ngum 2 concrete face slab rockfill dam at the end of the construction stage is carried out using two sets of model parameters (1) based on the laboratory tests and (2) in accordance with the proposed method. Comparisons of the computed results with dam monitoring data indicate that the proposed method can provide a simple but effective framework to take account of the scaling effect in dam deformation analysis.

• 한국환경복원기술학회지
• /
• 제16권3호
• /
• pp.63-81
• /
• 2013

The vascular plants in the Ohseosan and the Bongsusan, Chungnam were listed 439 taxa (9.0% of all 4,881 taxa of vascular plants); 95 families, 268 genera, 339 species, 5 subspecies, 75 varieties and 20 forms. Furthermore, the Ohseosan were listed 339 taxa and the Bongsusan were listed 306 taxa. So, Hemicryptophytes (H) were 107 taxa (24.4%), Therophytes (Th), Geophytes (G) same as were 82 taxa (18.7%) showed high proportional ratio in life form. Based on the list of rare plants, 4 taxa; Aristolochia contorta, Viola albida, Scutellaria insignis (LC) and Scrophularia koraiensis (DD) and endemic plants, 8 taxa; Aconitum pseudolaeve, Ajuga spectabilis, etc. Based on the list of specific plants, 35 taxa; Wisteria floribunda for. floribunda in class IV, 5 taxa (Scutellaria insignis, Scrophularia koraiensis, etc.) in class III, 5 taxa (Acer triflorum, Cymopterus melanotilingia, etc.) in class II, 24 taxa (Pyrus ussuriensis var. ussuriensis, Campanula punctata, etc.) in class I. Based on the list of naturalized plants, 9 families, 20 genera, 24 taxa (Persicaria orientalis, Carduus crispus, etc.) and ecosystem disturbing plants were Rumex acetocella, Ambrosia artemisiifolia. Naturalization rate was 5.5% of all 439 taxa of vascular plants and urbanization index was 7.5% of all 321 taxa of naturalized plants. In particular, for rare plants, in and ex-situ conservation of genetic resources must surely be done, by preserving present natural habitats, discovering additional natural habitats and securing seeds. Moreover, ecosystem disturbing plants require long-term monitoring and consistent management, since not only do they disturb the ecosystem in competition with Korean native species, but damage humans, too.

• 대한기계학회논문집A
• /
• 제28권5호
• /
• pp.489-494
• /
• 2004

Long Period Gratings (LPG) is currently receiving considerable attention because of their consistent measuring results fur pressure, temperature, strain and flow. LPG is easier to prepare and has a high sensitivity compared with Fiber Bragg Gratings (FBG). In addition, this kind of optical fiber sensors could be used for implementations in various structures. In this paper, LPG was used to monitor in situ the resin flow and the curing process in VARTM (Vacuum Assisted Resin Transfer. Molding). In order to demonstrate the effectiveness of the method, FBG is inserted into the glass mat to monitor the resin flow using optical spectrum analyzer (OSA). The curing reactions in VARTM are also observed using the same method. From the results, the attenuation wavelength shift and the loss change of attenuation band can be obtained from the status of the RTM (Resin Transfer Molding) sample owing to the internal variations of the .effective index, temperature, and pressure. It is shown that the proposed LPG is more effective in monitoring the curing reaction than FBG.

• 한국태양에너지학회 논문집
• /
• 제33권5호
• /
• pp.51-59
• /
• 2013

It is usual to evaluate the performance of the cool roof by measuring in-site rooftop temperature using thermal infra-red camera. The principal advantage of rooftop thermal infrared image acquired in oblique vantage point of super high-rise building as a remote sensor is to provide, in a cost-effective manner, area-wide information required for a scattered rooftop target with different colors, utilizing wide view angle and multi-temporal data coverage. This research idea was formulated by incorporating the concept of traditional remote sensing into rooftop temperature monitoring. Correlations between infrared image of super high-rise building and in-situ data were investigated to compare rooftop surface temperature for a total of four different rooftop locations. The results of the correlations analyses indicate that the rooftop surface temperature by the infrared images of super high-rise building alone could be explained yielding $R^2$ values of 0.951. The visible permanent record of the oblique thermal infra-red image was quite useful in better understanding the nature and extent of rooftop color that occurs in sampling points. This thermal infrared image acquired in oblique vantage point of super high-rise made it possible to identify area wide patterns of rooftop temperature change subject to many different colors, which cannot be acquired by traditional in-site field sampling. The infrared image of super high-rise building breaks down the usual concept of field sampling established as a conventional cool roof performance evaluation technique.

• 한국지하수토양환경학회지:지하수토양환경
• /
• 제20권7호
• /
• pp.80-89
• /
• 2015

Nitrate is on the most seriou pollutant encountered in shallow groundwater aquifer in agricultural area. There are various remediation technologies such as ion exchange, reverse osmosis, and biological denitrification to recover from nitrate contamination. Biological denitrification by indigenous microorganism of the technologies has been reviewed and applied on nitrate contaminated groundwater. In this work, we selected the site where the annual nitrate (NO₃⁻) concentration is over 105 mg/L and evaluated denitrification process with sampled soil and groundwater from 3 monitoring wells (MW4, 5, 6). In the results, the nitrate degradation rate in each well (MW 4, 5, and 6) was 25 NO₃⁻ mg/L/day, 6 NO₃⁻ mg/L/day, and 3.4 NO₃⁻ mg/L/day, respectively. Nitrate degradation rate was higher in batch system treated with 2 times higher fumarate as carbon source than control batch system (0.42M fumrate/1M NO₃⁻), comparing with batch system with soil sample. This result indicates that increase of carbon source is more efficient to enhance denitrification rate than addition of soil sample to increase microbial dynamics. In this work, we also confirmed that monitoring method of functional genes (nirK and nosZ) involved in denitrification process can be applied to evaluated denitrifcation process possibility before application of field process such as in-situ denitrification by push-pull test.