• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2011년도 춘계학술대회 논문집
• /
• pp.1378-1387
• /
• 2011

Seoul Metropolitan Rapid Transit Corporation - which is operating the subway lines No. 5, 6, 7 and 8 of Seoul's subway - has been operating a variety of motor cars and rail inspection vehicles to transport workers and materials into the tunnel at night after the daily revenue service for the maintenance of tunnel structure and track. However, the air quality in tunnels has been contaminated due to the operation of diesel engine cars, and rail inspection vehicles are now having higher chances of risks since the lightweight vehicles made with aluminum bogie became too obsolete. In this study, MRT type eco-friendly electric multi-inspection car has been elaborated for the purpose of improvement of tunnel environment and replacement of motor cars and rail inspection vehicles.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 추계학술대회논문집A
• /
• pp.246-251
• /
• 2001

The performance demonstration round robin test was conducted to quantify the capability of ultrasonic inspection for in-service and to address some aspects of reliability for nondestructive evaluation. The fifteen inspection teams who employed procedures that met or exceeded ASME Sec. XI code requirements detected the pinping of nuclear power plant with various cracks to evaluate the capability of detection. With data from PD-RR test, the performance of ultrasonic nondestructive inspection could be assessed using probability of detection and length and depth sizing of cracks.

• 한국신뢰성학회:학술대회논문집
• /
• 한국신뢰성학회 2002년도 정기학술대회
• /
• pp.217-224
• /
• 2002

The performance demonstration round robin test was conducted to quantify the capability of ultrasonic inspection for in-service and to address some aspects of reliability for nondestructive evaluation. The fifteen inspection teams who employed procedures that met or exceeded ASME Sec. XI code requirements detected the piping of nuclear power plant with various cracks to evaluate the capability of detection. With data from PD-RR test, the performance of ultrasonic nondestructive inspection could be assessed using probability of length and depth sizing of cracks.

• 한국안전학회지
• /
• 제27권4호
• /
• pp.121-127
• /
• 2012

Vehicle Inspection System is to examine the condition of vehicle regularly at the national level to protect lives and properties of the people from traffic accidents due to vehicle's fault. However, the vehicle inspection method, criteria, period and effectiveness have become a controversial issue, because of examining safety management of vehicle by drivers regardless of regular vehicle inspection. Therefore, the aim of this study is to investigate vehicle inspection timeliness and risk level of inspection items through basic statistical survey and portfolio analysis. The results of the research through practical analysis are: (1) The inspection failure rates between 3 and 6 model year tend to increase. (2) The failure of inspection items for safety highly impacts on traffic accident rate in terms of accident risks. (3) According to the result of portfolio analysis, faulty items located 1st quadrant are riding device, driveline system, controlling device, steering actuator, and fuel system.

• 비파괴검사학회지
• /
• 제24권2호
• /
• pp.186-196
• /
• 2004

각 국의 법령에서는 원자력발전소에서 발생할 수 있는 사고로부터 국민의 건강과 재산을 보호하기 위해 원자력발전소의 압력경계 주요 용접부 등에 대해서는 주기적으로 열화의 정도를 파악하기 위한 가동중 비파괴검사를 수행하도록 규정하고 있으며, 이를 뒷받침하기 위한 가동중검사 기술기준을 제정하여 이행하고 있다. 최근 리스크를 반영한 가동중검사 프로그램을 개발하여 적용을 시도하고 여지만, 기존의 결정론적 검사대상 선정 프로그램은 아직도 상당한 의미가 있다고 할 수 있다. 본 논문에서는 가동중검사에 관한 선진국 즉 미국, 프랑스, 캐나다, 일본 등의 기술기준과 IAEA에서 제시하는 안전지침의 비교검토를 통하여 현재 국내 가동중검사 기술기준의 개선방안을 모색하고자 하였다.

• 한국구조물진단유지관리공학회 논문집
• /
• 제24권1호
• /
• pp.133-141
• /
• 2020

한국시설안전공단에서는 '시설물의 안전관리에 관한 특별법'에 따라 철근콘크리트 구조물의 안전점검 및 정밀안전진단을 실시하도록 제시하고 있다. 그러나 한국시설안전공단 안전점검 및 정밀안전진단 세부지침의 평가방법에서는 평가결과를 등급으로 제시하기 때문에 구조물의 잔존수명을 알 수 없으며 부등침하가 구조물의 잔존수명에 미치는 영향을 반영하지 못한다. 따라서, 이 연구에서는 부등침하의 영향이 반영된 구조물의 잔존수명 평가모델을 제시하고자 하였다. 부등침하와 각 변위의 상관관계를 나타내는 기존의 연구를 바탕으로 부재의 공칭강도에 부등침하의 영향을 반영시키기 위한 식을 제시하였으며, 실제 철근콘크리트 구조물의 현장데이터를 활용하여 부등침하가 구조물의 잔존수명에 미치는 영향을 분석하였다.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2003년도 춘계학술대회 논문집
• /
• pp.73-78
• /
• 2003

Ultrasonic measurement is one of important technologies in the lift-time maintenance of nuclear poler plant. Ultrasonic inspection system is consisted of the operator, equipment and procedure. The reliability of ultrasonic inspection system is affected by its ability. The performance demonstration round robin was conducted to quantify the capability of ultrasonic inspection for in-service. The small number of teams who employed procedures that met or exceeded ASME Sec. XI Code requirements detected the piping of nuclear power plant with various cracks to evaluate the capability of detection and sizing. In this paper, the statistical reliability assessment of ultrasonic nondestructive inspection data using Monte Carlo simulation is presented. The results of the probability of detection (POD) analysis using Monte Carlo simulation are compared to these of logistic probability model. In these results, Monte Carlo simulation was found to be very useful to the reliability assessment f3r the small hit/miss data sets.

• 한국동물위생학회지
• /
• 제30권2호
• /
• pp.287-289
• /
• 2007

Uremia was diagnosed in a slaughtered 20-month old bull. It had no special clinical signs, but many lesions associated with uremia were observed at postmortem inspection. It had a lot of ascites. Kidney, urinary bladder and ureter were enlarged, congested and hemorrhagic, and the incised section of those slightly smelled nasty. However, the precise cause of uremia in this case could not be completely identified.

• 한국동물위생학회지
• /
• 제36권2호
• /
• pp.121-125
• /
• 2013

The survey was conducted to investigate the relation between slaughter inspection results and the quality of cattle carcasses by inquiring animal products grading service results of Korea Institute for Animal Products Quality Evaluation (KAPE) about partial-disposed cattle carcasses after dismantling inspection. Of the 13,586 slaughtered cattle, 1,343 (9.9%) cattle heads were partially disposed from January to August, 2012 at slaughterhouses in Gwangju area, Korea. Of the 1,343 partial disposed cattle, 613 (45.6%) cattle carcasses were graded into above "Grade 1". Among partially disposed 1,171 Hanwoo heads, 613 (52.3%) cattle carcasses were graded into above "Grade 1". However, none of dairy and beef cattle carcasses were graded into above "Grade 1" out of 163 and 9 partial disposals, respectively. Of the 221 partial disposals by enteric fat necrosis, 139 carcasses were graded into above "Grade 1", and the ratio; 62.9% (P=0.001), was higher than that (50.3%) of total cattle carcass grade which is above "Grade 1". From these results, it is suggested that quality of cattle carcasses which is mainly determined by marbling might be related to the fatty lesions such as fatty liver and enteric fat necrosis.

• Journal of Platform Technology
• /
• 제9권4호
• /
• pp.51-59
• /
• 2021

본 논문은 사전에 위치가 알려져 있는 시설물에 설치된 Wi-Fi AP에 접속한 기록을 이용하여 결정한 사용자의 위치 정보를 이용하여 서비스를 제공하는 방법을 제안한다. 본 논문에서 제안하는 위치 기반 서비스는 작업자의 위치 및 시간 정보를 이용하여 승강기 등 주기적 점검 및 유지보수가 필요한 시설물을 대상으로 현장 작업자의 작업 진행 상황을 관리하는 것이다. 본 논문에서 제안하는 작업 스케줄 관리 방법은 작업을 위해 작업자가 시설물에 도착해야 하는 사전 스케줄된 시간과 실제 그 시설물에 도착한 시간을 기반으로 한다. 또, Wi-Fi AP 접속 정보를 기반으로 한 위치 결정 및 시간 정보를 기반으로 한 작업스케줄 관리의 가능성을 보이기 위해 본 논문에서는 주기적 점검 및 유지보수가 필요한 승강기 유지보수 분야에서 적용할 수 있는 실험적 구현을 일부 하였다. 실험적으로 구현한 결과는 본 논문에서 제안한 방법이 시설물의 점검 및 유지보수 관련 분야에 활용될 수 있음을 보인다.